Miroslav Mijajlović, Dragan Milčić, Analytical Model for Estimating the Amount of Heat Generated During Friction
Stir Welding: Application on Plates Made of Aluminium Alloy 2024 T351, Welding Processes, Radovan Kovacevic (Ed.),
InTech, DOI: 10.5772/53563. ISBN: 978-953-51-0854-2, Publisher: InTech http://www.intechopen.com/books/weldingprocesses/
analytical-model-for-estimating-the-amount-of-heat-generated-during-friction-stir-welding-applicatio
Chapter 11, pp 247-274.
Miodrag Milčić, Tomaž Vuherer, Igor Radisavljević, Dragan Milčić (2019) Experimental Investigation of Mechanical Properties on Friction Stir Welded Aluminum 2024 Alloy. In: Mitrovic N., Milosevic M., Mladenovic G. (eds) Experimental and Numerical Investigations in Materials Science and Engineering. CNNTech 2018, CNNTech 2018. Lecture Notes in Networks and Systems, vol 54. Springer, Cham. https://doi.org/10.1007/978-3-319-99620-2_4
Vladislav Krstić, Dragan Milčić, Miodrag Milčić (2020) Experimental Investigations on Bound Frequency of Axial Ball Bearings for Fixing the Ball Screws. In: Mitrovic N., Milosevic M., Mladenovic G. (eds) Computational and Experimental Approaches in Materials Science and Engineering. CNNTech 2018. Lecture Notes in Networks and Systems, vol 90. Springer, Cham. https://doi.org/10.1007/978-3-030-30853-7_19
Miltenović Vojislav, Milčić Dragan.: Mašinski elementi - Praktikum za vežbe, Mašinski fakultet Niš, I-izdanje, 1989, s. 290.
Miltenović Vojislav, Milčić Dragan.: Mašinski elementi - Praktikum za vežbe, II-dopunjeno izdanje, Mašinski fakultet Niš, 1990, s. 316.
Ristić Slobodan, Milčić Dragan: Mašinski elementi - Praktikum za izradu projektnih zadataka, II izdanje, 1997, Niš, s. 157.
Miltenović Vojislav, Milčić Dragan: Proračun mašinskih elemenata pomoću računara, Mašinski fakultet Niš, 1997., s.140.
Milčić Dragan: Pouzdanost mašinskih sistema, Mašinski fakultet Univerziteta u Niš, 2005., s.200.
Milčić Dragan, Mijajlović Miroslav: Pouzdanost mašinskih sistema – Zbirka rešenih zadataka , Mašinski fakultet Univerziteta u Nišu, 2008., s.215.
Miloš Milovančević, Dragan Milčić, Boban Anđelković: Projektni menadžment, Mašinski fakultet, Niš, 2015, ISBN 978-86-6055-069-1.
Milčić Dragan: Mašinski elementi, Univerzitet u Nišu, Mašinski fakultet u Nišu, 2018., s.642.
Milčić Dragan: Mašinski elementi - 2. dopunjeno i prerađeno izdanje, Univerzitet u Nišu, Mašinski fakultet, 2022., s.758 ISBN 978-86-6055-161-2.
Anđelković Boban, Milčić Dragan, Janošević Dragoslav, Milovančević Miloš: Modified Neural network-based study into the coefficient of friction in pressed assemblies. TRANSACTIONS OF FAMENA XXXIV-3 (2010), Faculty of mechanical engineering and naval architecture, ISSN 1333-1124, pp. 20-38 Zagreb 2010 (M23= 3.0, R52=3.0)
Mijajlović Miroslav, Milčić Dragan, Stamenković Dušan, Živković Aleksandar: Mathematical Model for Generated Heat Estimation During Plunging Phase of FSW Process, Transactions of Famena, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia, XXXV-1/2011,April 2011, pp 39 - 54, ISSN 1333-1124, UDC 621.791.1, (M23= 3.0, R52=3.0);
Mijajlović Miroslav, Milčić Dragan, Anđelković Boban, Vukićević Miomir, Bjelić Mišo: Mathematical Model for Analytical Estimation of Generated Heat During Friction Stir Welding. Part 1, Journal of Balkan Tribological Association, Vol. 17, No 2, 2011, pp. 179-191, ISSN 1310-4772, Sofia, Bulgaria, 2011, (M23= 3.0, R52=3.0);
Mijajlović Miroslav, Milčić Dragan, Anđelković Boban, Vukićević Miomir, Bjelić Mišo: Mathematical Model for Analytical Estimation of Generated Heat During Friction Stir Welding. Part 2, Journal of Balkan Tribological Association, Vol. 17, No 3, 2011, pp. 361-370, ISSN 1310-4772, Sofia, Bulgaria, 2011, (M23= 3.0, R52=3.0);
Dragan Milčić, Miroslav Mijajlović, Nenad Pavlović, Mića Vukić: Temperature Based Validation of the Analytical Model for the Estimation of the Amount of Heat Generated During Friction Stir Welding, Thermal Science, Year 2012, Volume 16, Issue Supplement 2, (M23= 3.0, R52=3.0);
Dragoljub Živković, Dragan Milčić, Milan Banić, Peđa Milosavljević, Thermomechanical Finite Element Analysis of Hot Water Boiler Structure, Thermal Science, VINCA INST NUCLEAR SCI, 16, 2, pp. S387 - S398, 0354-9836, 621, 2012.
Milčić Dragan, Miladinović Slobodan, Mijajlović Miroslav, Marković Biljana, Determination of Load Spectrum of Bucket Wheel Excavator SRs 1300 in Coal Strip Mine Drmno TRANSACTIONS OF FAMENA, (2013), vol. 37 br. 1, s. 77-88.
Miroslav Mijajlović, Miodrag Milčić, Dragan Milčić, Numerical Simulation of Friction Stir Welding, Thermal Science, Thermal Science, 18, 3, pp. 967 - 978, 2334-7163, 10.2298/TSCI1403967M, Oct2014.
Miomir Vukićević, Mišo Bjelić, Dragan Milčić, Miroslav Mijajlović, Marina Pljakić, Analytical Algorithm Expressions in Simulation of the Temperature Field in Electric Resistance Spot Welding, EHNICKI VJESNIK-TECHNICAL GAZETTE, (2018), vol. 25 br. 1, str. 64-71
Miodrag Milčić, Tomaž Vuherer, Igor Radisavljević, Dragan Milčić, Janez Kramberger, THE INFLUENCE OF PROCESS PARAMETERS ON THE MECHANICAL PROPERTIES OF FRICTION-STIR-WELDED JOINTS OF 2024 T351 ALUMINUM ALLOYS, Materiali in Tehnologije (2019), INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, Volume 53, 6, pp. 771 - 776, 1580-2949, 620.1:67.017:621.791.1:669.715, 10.17222/mit.2019.062, 2019.
Dragan Milčić, Miodrag Milčić, Vojkan Nojner, Miloš Milovančević, Computer-aided modeling of rolling-element bearing composition by adaptive neuro-fuzzy technique, PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS, ELSEVIER SCIENCE BV, 0378-4371, 10.1016/j.physa.2019.03.120, 2019.
Erdinč Rakipovski, Dragan Milčić, Validation Testing of An Innovative Braking System for Freight Wagons, TRANSACTIONS OF FAMENA, (2020), vol. 44 br. 3, str. 81-92. (M23)
Dragan Milčić, Amir Alsammarraie, Miloš Madić, Vladislav Krstić, Miodrag Milčić, Predictions of Friction Coefficient in Hydrodynamic Journal Bearing Using Artificial Neural Networks, STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, (2021), vol. 67 br. 9, str. 411-420 (M23).
Milčić Miodrag; Milčić Dragan; Vuherer Tomaž; Radović Ljubica; Radisavljević Igor; Đurić Aleksija. 2021. "Influence of Welding Speed on Fracture Toughness of Friction Stir Welded AA2024-T351 Joints" Materials 14, no. 6: 1561. https://doi.org/10.3390/ma14061561
Aleksija Đurić, Dragan Milčić, Damjan Klobčar, Biljana Marković, Multi-Objective Optimization of the Resistance Spot-Welding Process Parameters for the Welding of Dual-Phase Steel DP500, Materiali in Tehnologije, (2021), INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE, vol. 55 br. 2, str. 201-206 (M23)
Tomaž Vuherer, Miodrag Milčić, Srečko Glodež, Dragan Milčić, Ljubica Radović, Janez Kramberger, Fatigue and fracture behaviour of Friction Stir Welded AA-2024-T351 joints, THEORETICAL AND APPLIED FRACTURE MECHANICS, (2021), vol. 114, https://doi.org/10.1016/j.tafmec.2021.103027
Aleksija Đurić, Dragan Milčić, Zijah Burzić, Damjan Klobčar, Miodrag Milčić, Biljana Marković, Vladislav Krstić, Microstructure and Fatigue Properties of Resistance Element Welded Joints of DP500 Steel and AW 5754 H22 Aluminum Alloy, CRYSTALS, (2022), vol. 12 br. 2, https://www.mdpi.com/2073-4352/12/2/258 (M22)
Vladislav Krstić, Dragan Milčić, Miloš Madić, Miodrag Milčić, Miloš, Milovančević, Prediction of Friction Torque and Temperature on Axial Angular Contact Ball Bearings for Threaded Spindle Using Artificial Neural Network, Journal of Vibration Engineering & Technologies volume 10, pages 1473–1480 (2022) (M22)
Miloš Milovančević, Dragan Milčić, Boban Andjelković , Ljubomir Vračar, Train Driving Parameters Optimization to Maximize Efficiency and Fuel Consumption, Acta Polytechnica Hungarica Vol. 19, No. 3, 2022, pp. 143-154. (M23)
Stojičić Srdjan, Milovančević Miloš, Milčić Dragan, Andjelković Boban, Vračar Ljubomir, Optimization of Train Diesel Engine for Maximizing Efficiency and Driving Quality Using Modified Parameterized Level-Set Method, JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, Journal of Vibration Engineering & Technologies volume 11, pages 43–52 (2023) (M22)
Rad u časopisu verifikovanom posebnom odlukom M24
Miroslav Mijajlović, Dragan Milčić, Miroslav Đurđanović, Vencislav Grabulov, Aleksandar Živković, Milenko Perović: Osnovni pojmovi kod postupka zavarivanja trenjem sa mešanjem prema AWS D17.3/D17.3M: 2010 i ISO 25239-1: 2011, Zavarivanje i zavarene konstrukcije, časopis Društva za unapređenje zavarivanja u Srbiji, godina LVII, broj 2, str. 61-68, UDC: 629,791,13, ISSN 0354-7965, 2012, Beograd, (M24= 3.0, R52=3.0);
Radovi u ostalim časopisima
Miodrag Velimirović, Ranđel Bogdanović, Dragan Milčić: Pogonski kolski slog vučnih vozila. Naučni skup o železničkom mašinstvu, Niš, 1992, Rad štampan u časopisu "Železnice" Vol 48, novembar 1992., str. 1245-1248.
Vojislav Miltenović, Dragan Milčić: Konstruisanje hidrodinamičkih kliznih ležaja pomoću računara. Peta međunarodna konferencija o tribologiji - YUTRIB '97, Kopaonik., 18-20, jun 1997. Štampan u časopisu- Tribologija u industriji, Volume 20, No. 1, 1998., s.31-35.
Vojislav Miltenović, Dragan Milčić: Savremene metode razvoja izvršilaca elementarnih funkcija. Časopis - KONSTRUISANJE MAŠINA - JOURNAL OF MECHANICAL ENGINEERING DESIGN, No 1, 1998. s.13-22.
Dragan Milčić: Koncipiranje zupčastih prenosnika snage primenom neuronske mreže. Časopis - KONSTRUISANJE MAŠINA - JOURNAL OF MECHANICAL ENGINEERING DESIGN, Vol.4, No 1, 2001. s.1-8.
Dragan Milčić, Dragoslav Janošević, Miomir Jovanović: Primena CA - tehnologija u razvoju proizvoda. IMK-14 Istraživanje i razvoj, Časopis instituta IMK “14. Oktobar” Kruševac, Godina VIII, Broj (14-15), 1-2. 2002., s. 55-60.
Dragan Milčić, Vojislav Miltenović: Aplication of artifical intelligence methods in gear transmitters conceptual design. The Scientific Journal FACTA UNIVERSITATIS, Series: Mechanical Engineering Vol. 1, No 6, 1999, pp. 721-734.
Vojislav Miltenović, Dragan Milčić: Calculation of load capacity of gears in random varying exploitation conditions. V Yugoslav Symposium on Nonlinear Mechanics - Nonlinear Sciences at the Threshold of the Third Millennium, 2. - 5. Oktober 2000., Niš, štampano u The Scientific Journal FACTA UNIVERSITATIS, Series: Mechanical Engineering Vol. 1, No 7, 2000, pp. 799-807.
Dragan Milčić, Slobodan Miladinović: CALCULATION OF THE STRUCTURAL ELEMENTS OF THE BUCKET WHEEL EXCAVATOR WORKING WHEEL TRANSMISSION, FACTA UNIVERSITATIS, SERIES: Mechanical Engineering, Vol. 1, N0 9, 2002., pp. 1241-1252.
Dragan Milčić, Dragan Mitić: Značaj inovacije znanja permanentnog obrazovanja za kvalitet i konkurentnost. IMK-14 Istraživanje i razvoj, Godina XIII , Broj (26-27), 1-2. 2007., s. 79-86. ISSN 0354-6829.
Dragan Milčić: Integrisani programski sistem za konstruisanje prenosnika snage – veza sa CAD sistemom, IMK-14 Istraživanje i razvoj, Godina XIV , Broj (28-29), 1-2. 2008., s. 91-98. ISSN 0354-6829.
Miroslav Mijajlović, Dragan Milčić: Analiza fazi pouzdanosti mašinskih sistema, IMK-14 Istraživanje i razvoj, Godina XV , Broj (30-31), 1-2. 2009., s. 107-114. ISSN 0354-6829.
Sava Đurić, Dragan Milčić, Dragan Mitić: Procena podobnosti pogona za izradu zavarenih konstrukcija, Časopis instituta IMK “14. Oktobar” Kruševac, Godina XV , Broj (30-31), 1-2. 2009., s. 215-221. ISSN 0354-6829
Miroslav Đurđanović, Miroslav Mijajlović, Dragan Milčić, Dušan Stamenković: Heat Generation During Friction Stir Welding Process, Tribology in Industry, no. 1-2, 2009, Serbia, Kragujevac, Faculty of Mechanical Engineering Kragujevac, May, 2009, Journal, vol. 31, pp. 8-14, no. 1-2, ISSN 0354-8996.
Sava Đurić, Dragan Milčić, Dragan Mitić, Slavoljub Vesić: Projekat tehnologije zavarivanja noseće čelične konstrukcije, IMK-14 Istraživanje i razvoj, 2009, vol. 15, br. 3-4, str. 125-132, ISSN 0354-6829.
Sava Đurić, Dragan Milčić, Miroslav Smiljković: Saniranje cevi ekranskog sistema vrelovodnog blok kotla, IMK-14 - Istraživanje i razvoj, vol. 16, br. 3, str. 97-100, 2010, ISSN 0354-6829.
Branislav Popović, Dragan Milčić, Miroslav Mijajlović, Failure Modes and Effects Analysis of the Auto Cooling Fan Motor, Machine Design, University of Novi sad, Faculty of Technical Sciences, Novi Sad, Serbia, 2, 1, pp. 69 - 74, ISSN 1821-1259, 2010
Sava Đurić, Miroslav Smiljković, Dragan Milčić: Prilog razvoju modela organizacije zavarivačkih radova, IMK-14 - Istraživanje i razvoj, vol. 16, br. 4, str. 111-114, 2010, ISSN 0354-6829.
Dragan Milčić, Miroslav Mijajlović, Boban Anđelković, Sava Đurić: Automatizacija proračuna zavarenih spojeva (Automatisation of Welded Joints Calculation), IMK – 14, Istraživanje i razvoj, Časopis instituta IMK “14. Oktobar” – Kruševac, Srbija, godina XVII, broj 38, 1/2011, str. 33-39, UDK 621, ISSN 0354-6829.
Miroslav Mijajlović, Dragan Milčić, Vera Nikolić, Miodrag Milčić, Numerical Simulation of Friction Stir Welding on AA 2024 T351 Plates, Scientific Publications of the State University of, Универзитет у Новом Пазару, 4, 2, pp. 65 - 70, 2217-5539, -1385736-, Jun2012.
Milena Rajić, Dragoljub Živković, Marko Mančić, Dragan Milčić, Dynamic behaviour of hot water boilers during start up, FACTA UNIVERSITATIS- Series: Mechanical Engineering Vol. 12, No 1, 2014, pp. 85 - 94, 0354-2025.
Branislav Popović, Dragan Milčić, Miodrag Milčić, Developement of automotive radiator cooling fan, Mobility and Vehicle Mechanics, Mobility and Vehicle Mechanics, Vol. 41, No. 4, pp. 29 - 37, ISSN 2334-9891, 2015.
Miodrag Milčić, Tomaž Vuherer, Igor Radisavljević, Dragan Milčić, UTICAJ PARAMETARA ZAVARIVANJA TRENJEM SA MEŠANJEM NA KARAKTERISTIKU ZAVARENOG SPOJA PLOČA OD LEGURE
ALUMINIJUMA 2024 T351, Наука + Пракса, Грађевинско-архитектонски факултет, Ниш, 20, 1, pp. 52 - 59, 1451-8341, 693.827:621.791.9, 2017.
Nada Bojić, Dragan Milčić, Milan Banić, Miroslav Mijajlović, Ružica Nikolić, Radial Force Impact on the Friction Coefficient and Temperature of a Self-Lubricating Plain Bearing, FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, UNIV NIS, 15, 3, pp. 427 - 437, 0354-2025, 10.22190/FUME160830010B, Niš, Serbia, Jun2017.
Erdinč Rakipovski, Dragan Milčić, RELIABILITY ANALYSIS OF DISTRIBUTOR VALVE OF AIR BRAKE SYSTEM FOR FREIGHT WAGON, Facta Universitatis, Series: Work & Living Environment Protect, Универзитет у Нишу, 16, 2, pp. 95 - 106, 0354-804X, 10.22190/FUWLEP1902095R, 2019.
Мiodrag Milčić, Dragan Milčić, Boban Anđelković, MODAL ANALYSIS OF FIXTURE WITH SPECIMENS FOR FATIGUE TESTING OF WELDED JOINTS ON ELECTRODYNAMIC SHAKER, Machine Design, Факултет техничких наука,, 9, 4, pp. 133 - 138, 1821-1259, 10.24867/MD.9.2017.4.133-138, 2017.
Krstić Vladislav, Milčić Dragan, Milčić Miodrag, A THERMAL ANALYSIS OF THE THREADED SPINDLE BEARING ASSEMBLY IN NUMERICALLY CONTROLLED MACHINE TOOLS, FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, UNIV NIS, Vol. 16, No. 2, pp. 261 - 272, 0354-2025, 10.22190/FUME170512022K, NIS, Aug2018.
Miodrag Milčić, Igor Radisavljević, Zijah Burzić, Ljubica Radović, Tomaž Vuherer, Dragan Milčić, Nataša Zdravković, The Influence of Welding Speed on Mechanical Properties of Friction Stir Welded Joints of AA2024 T351 Aluminum Alloy, Scientific Technical Review, Војнотехнички институт,, 70, 1, pp. 53 - 57, 1820-0206, 621.791,539.42:57.012.2, 10.5937/str2002053M, Sep2020.
Miodrag Milčić, Dragan Milčić, Nataša Zdravković, EXPERIMENTAL INVESTIGATION OF FRICTION STIR WELDING OF 2024 ALUMINIUM ALLOYS JOINTS TESTING, ACTA TECHNICA CORVINIENSIS, Politechnica, 8, 3, pp. 47 - 50, 2067-3809, Jul2020.
Aleksija Đurić, Dragan Milčić, Biljana Marković , Miodrag Milčić, TENSILE-SHEAR TESTING OF RESISTANCE ELEMENT WELDED JOINT OF CARBON FIBER-REINFORCED POLYMER AND DP500 STEEL, Innovative Mechanical Engineering, (2022), Vol. 1 No. 1, pp. 139-146. http://ime.masfak.ni.ac.rs/index.php/IME/article/view/15 (M51)
Živković,D., Milčić,D.: The analysis of the effects of thermal and radiation creeping of reactor screwson the PWR and BWR nuclear reactor safety. 11. International Congress of Chemical Engineering Chisa '93., Praha, 1993.
Milčić,D., Miladinović,S.: Application of techno - economic criterion for adoption shaft - hub gear joint. CIM'94, Zakopane, Poland, 1994.
Miltenović,V., Milčić, D.: An expert system for choosing gear body shapes. CIM'94, Zakopane, Poland, 1994.
Velimirović,M., Miltenović,V., Milčić, D.: An expert system for selecting the optimum variant of the transmission gear, CIM'94, Zakopane, Poland, 1994.
Miltenović,V., Milčić, D.: An expert system for choosing gear shapes. GEAR TRANSMISSIONS'95, International congress, Sofia, Bulgaria, pp. 89-92.
Miltenović,V., Milčić,D.: Expertensystem zur Auswahl der Verbindung von Wellen und Naben. Int.Con. on "COMPUTER INTEGRATED MANUFACTURING" CIM'96. May 14-17, 1996. Zakopane-POLAND, Volume-III, pp. 331-338.
Milčić,D., Miltenović,V., Manić,M., Domazet,D., Trajanović,M., Mišić,D.: CAD System zum Automatischen Konstruieren von Wellen. Int.Con. on "COMPUTER INTEGRATED MANUFACTURING" CIM'96. May 14-17, 1996. Zakopane - POLAND, Volume-III, pp. 321-330.
Anđelković,B., Milčić,D.: Methodical Design of Industry Control Systems. Int.Con. on "COMPUTER INTEGRATED MANUFACTURING" CIM'96. May 14-17, 1996. Zakopane-POLAND, Volume III, pp. 7-12.
Manić,M., Domazet,D., Trajanović,M., Mišić,D., Milčić,D.: Expert system for shafts manufacturing automatic process planning. Int.Con. on "COMPUTER INTEGRATED MANUFACTURING" CIM'96. May 14-17, 1996. Zakopane-POLAND, Volume-II, pp. 229-236.
Miltenović,V., Kuzmanović,S., Milčić,D.: Computer aided design of hydrodynamic sliding bearings. International Symposium on Tribology SLAVYANTRIBO-4. “TRIBOLOGY AND TECHNOLOGI”St.-Petersburg - Russia, June 23-27, 1997.
Miltenović, V., Milčić, D.: Intelligent integrated system for the gear power transmitters design. 4th World Congress on Gearing and Power Transmission, Paris, 16-18. mart 1999., pp.143-155.
Miltenović, V., Milčić, D., Stamenković, N.: Architecture of intelligent integrated system for the gear power transmitters design. International Conference on COMPUTER INTEGRATED MANUFACTURUNG - CIM ‘99, Zakopane, POLAND, 9-12. mart 1999.
Miltenović, V., Milčić, D.: Aplication artifical intelligence for the gear power transmitters design. The Third International Conference “HEAVY MACHINERY HM’99” , Proceedings, Kraljevo, 28-30 October 1999, pp. 7.15-7.20.
Milčić, D., Miltenović, V., Šarenac, M.: Fuzzy expert system for gear power transmitters conceptual design. International Conference on COMPUTER INTEGRATED MANUFACTURUNG - CIM 2001, Zakopane, POLAND, March 7-9, 2001.
Šarenac, M., Miltenović, V., Milčić, D.: The influence of the jamming moment on the mechanical model of the machine tool main spindle. ASME-GREEK SECTION, First National Conference on Recent Advances in Mechanical Engineering, Sep. 17-20, 2001., Patras, Greece, ANG1/P052.
Miltenović, V., Milčić, D., Šarenac, M.: Use of fuzzy logic in gear power transmitters conceptual design. MPT2001- Fukuoka The JSME International Conference on Motion and Power Transmissions, Nov. 15.-17. 2001., Fukuoka, Japan, s. 699-702.
Milčić, D., Anđelković, B.: PROGRAM MODULE FOR SELECTION AND CALCULATION OF ROLLING BEARINGS, 6th International Conference Computer Integrated Manufacturing CIM 2003, 26 - 28 May 2003, Wisla, Poland.
Anđelković, B., Milčić, D.: THE NEURO - FUZZY ALGORITHM FOR DETERMINATION THE COEFFICIENT OF FRICTION, 6th International Conference Computer Integrated Manufacturing CIM 2003, 26 - 28 May 2003, Wisla, Poland.
Milčić, D., Anđelković, B.: DIE ANWENDUG DER METHODEN VON KÜNSTLICHE INTELLIGENZ IN DER AUSWAHL DER WELLE-NABE- VERBINDUNGEN, International Conference “POWER TRANSMISSIONS ‘03”, Varna, 2003, pp. 173-176.
Anđelković, B., Đokić, V., Milčić, D.: AN ALGORITHM FOR CREATING FUZZY MODEL IN PROBLEMS WITH MECHANICAL CONECTIONS BASED ON FRICTION, International Conference “POWER TRANSMISSIONS ‘03”, Varna, 2003.
Milčić, D., Mijajlović, M., Anđelković, B.: Appliance of TRIZ in choice of technology for solving problem of wooden waste, V International Scientific Conference Heavy Machinery- HM’05, Kraljevo, 28. june – 3 july 2005, II A.31-II A.34.
Anđelković, B., Đokić, V., Milčić, D.: The model for generating the structure of the NEURO-FAZI inference system, V International Scientific Conference Heavy Machinery- HM’05, Kraljevo, 28. june – 3 july 2005, I C.45 – I C.48.
Milčić, D., Miltenović, V.: Design of Gear Drives as Virtual Process, The International Conference on Gears 2005, September 14th to 16th, 2005, Garching near Munich, Germany, VDI-Berichte Nr. 1904, 2005, s.399-415.
Milčić, D., Mijajlović, M.: EXPERTENSYSTEM FÜR DIE AUSWAHL DER WÄLZLAGERART. The Second International Conference “Power Transmissions 2006”, Novi Sad, 25.-26. April, 2006, s. 203-210.
Milčić, D., Milošević, V., Mijajlović, M.: Automatisation of radial journal bearings design process, KOD 2008, Proceedings The 5th International Symposium about Design in Meshanical Engineering, Novi Sad, 15-16 april 2008, pp 141-148.
Milčić, D., Mijajlović, M., Veljanović, D.: Analysis Reliability Software, 8th International Conference „RESEARCH AND IN MECHANICAL INDUSTRY“ RaDMI 2008, Užice, 2008. ISBN 978-86-83803-24-8 (M33)
Milčić, D., Đurić, S. , Mitić, D.: Normative regulation of staff in area of welding training, 8th International Conference „RESEARCH AND IN MECHANICAL INDUSTRY“ RaDMI 2008, Užice, 2008. ISBN 978-86-83803-24-8
Mijajlović, M., Milčić, D., Đurđanović, M.: Tribology as one parameter necessary for reliability engineering and technical system’s reliability imrovement. SERBIATRIB ’09, 11th International Conference on Tribology, Beograd, 13-15 May 2009, pp. 272-277. ISBN 978-86-7083-659-4
Đurđanović Miroslav, Mijajlović Miroslav, Milčić Dragan, Stamenković Dušan: Heat generation during friction stir welding process. SERBIATRIB ’09, 11th International Conference on Tribology, Beograd, 13-15 May 2009, pp. 135-140. ISBN 978-86-7083-659-4
Miladinović Slobodan, Milčić Dragan, Petrović Goran: Determination of the of bucket wheel excavator load spectrum as a basis for designing of transmission for bucket wheel rotation, 3rd International Conference Power Transmissions ’09, Kalitea, 1-2.10.2009., pp. 601-606. ISBN 978-960-243-662-2
Mijajlović, M., Milčić, D., Đurđanović, M.: Heat Generation - Temperature Phases of the FSW Process, 10th International Conference ²Research and Development in Mechanical Industry² RaDMI 2010, 16 - 19. September 2010, Donji Milanovac, Serbia, volume 1, pp 331-335, ISBN 978-86-6075-017-6
Milčić, D., Mijajlović, M., Radojević, M.: : Wood Furniture Parametric Modeling as an Interior Design Strategy, 10th International Conference ²Research and Development in Mechanical Industry² RaDMI 2010, 16 - 19. September 2010, Donji Milanovac, Serbia, volume 1, pp 346-3353, ISBN 978-86-6075-017-6.
Radojević, M., Milčić, D., Mijajlović, M.: Parametric Modeling Applied In Wood Furniture Manufacturing, Proceedings / The Sixth International Symposium about Forming and Design in Mechanical Engineering, KOD 2010, 29-30 September 2010, Palić, Serbia. — Novi Sad: Faculty of Technical Sciences, 2010 (Novi Sad: Graphic Center GRID). — V, 376 str.: ilustr.; 30 cm: ilustr.; 253. – 260. page, COBISS.SR-ID 255525127, ISBN 978-86-7892-278-7.
Djurić, S., Milčić, D., Mijajlović, M., Mitić, D.: Model of Welding Technology for Reconstruction of Heating Station System, Proceedings / The 2nd South – East European IIW International Congress: Welding – High Tech Technology in 21st Century, Sofia, Bulgaria, October, 21st – 24th, 2010, 295 – 300. page, ISBN 978-954-9322-25-5.
Milčić, D., Nikolić, M., Mijajlović, M.: Automatisation of Belted Power Transmission’s Design, Proceedings / The International Conference – Mechanical Engineering in XXI Century, Faculty of Mechanical Engineering, Niš, Serbia, 25 – 26 November, 2010, 129 – 132 p, ISBN 978-86-6055-008-0, COBISS.SR-ID 179681036.
Mijajlović, M., Đurđanović, M., Milčić, D., Stamenković, D. Anđelković, B.: Tribological Analysis of Contact Between Welding Tool and Base Metal as Function of Heat Generation Within FSW Process, Proceedings / The International Conference – Mechanical Engineering in XXI Century, Faculty of Mechanical Engineering, Niš, Serbia, 25 – 26 November, 2010, 129 – 132 p, ISBN 978-86-6055-008-0, COBISS.SR-ID 179681036.
Mijajlović Miroslav, Stamenković Dušan, Milčić Dragan, Đurđanović Miroslav: Study About Friction Coefficient Estimation in Friction Stir Welding, Balkantrib 11, The 7th International Conference on Tribology, Proceedings, pp 323-330, ISBN 978-960-98780-6-7, 3-5 October, 2011, Thesaloniki, Greece.
Milčić Dragan, Aleksandar Živković, Mijajlović Miroslav: An Overview on Friction Stir Welding of the Al 2024 T351, 34th Inernational Conference on Production Engineering, Proceedings, University of Niš, Faculty of Mechanical Engineering, Niš, pp 477-480, ISBN 978–86 –6055–019–6, 28-30 September, 2011, Niš, Serbia.
Dragoljub S. Živković, Dragan S. Milčić, Milan S. Banić, Miroslav M. Mijajlović: Numerical Method Application for Thermo-Mechanical Analzsis of Hot Water Boilers Construction, The 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, pp 1351-1362, ISBN 978-86-6055-016-5, July 4-7, 2011, Novi Sad, Serbia.
Živković, A., Mijajlović,M., Daşcău,H., Sedmak,A. ,Radisavljević,I., Milčić,D., Veljić ,D. Influence of the welding tool’s geometry on productivity of friction stir welding process, The 5th International Conference Innovative technologies for joining advanced materials, June 16-17, 2011, Timisoara, Romaniaa, ISSN 2067-3809;
Dragan Milčić, Dragan Kalaba, Dragoljub Živković, Miroslav Mijajlović: Exploitation Researches of the Thermo-Energetic System’s Availability, Faculty of Mechanical Engineering Niš, 15th Symposium on Thermal Science and Engineering of Serbia, 18.-21. October 2011, Sokobanja, Serbia, pp. 905 – 917, Procceding on CD, ISBN 978-86-6055-018-9.
Dragoljub S. Živković, Dragan S. Milčić, Dejan M. Mitrović, Marko V. Mančić: MODERN TECHNOLOGY FOR SUSTAINABLE EXPLOITATION OF GEOTHERMAL ENERGY, 15th Symposium on Thermal Science and Engineering of Serbia, Sokobanja, October 18–21, 2011 pp. 251-260, Procceding on CD, ISBN 978-86-6055-018-9
Dragoljub Živković, Peđa Milosavljević, Dragan Milčić: POSSIBILITY OF IMPROVING MAINTENANCE PROCESS IN HEATING PLANTS, 15th Symposium on Thermal Science and Engineering of Serbia, Sokobanja, October 18–21, 2011, pp. 519-528., Procceding on CD, ISBN 978-86-6055-018-9
Boban Andjelković, Dragan Milčić, Jelena Stefanović Marinović, Aca Micić, Biljana Djordjević: ABOUT THE DYNAMIC BEHAVIOR AND THE REGULATION OF NEW TYPE OF WIND TURBINE GEARBOX BASED ON CVT, 15th Symposium on Thermal Science and Engineering of Serbia, Sokobanja, October 18–21, 2011, pp.867-874., Procceding on CD, ISBN 978-86-6055-018-9
Мирослав Мијајловић, Стаменковић Душан, Ђурђановић Мирослав, Драган Милчић, About the Influence of Friction Coefficient on Heat Generation During Friction Stir Welding, 12th International Conference on Tribology - SERBIATRIB 11, 12th International Conference on Tribology - SERBIATRIB 11, pp. 234 - 239 , 978-86-86663-74-0, Kragujevac, Serbia, 11. - 13. May, 2011
Биљана Марковић, Драган Милчић, Мирослав Мијајловић, A Study on Work of Dislocated Teams: Virtual Project Realisation, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems - IRMES 2011, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems - IRMES 2011, pp. 43 - 48, 978-86-6055-012-7, Zlatibor, Serbia, 27. - 28. Apr, 2011
Miroslav Mijajlović, Dragan Milčić, Aleksandar Živković, Boban Anđelković, Influence of the Technological Hole in Welding Plates on Weld Creation and Heat Generation During Friction Stir Welding, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems - IRMES 2011, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems - IRMES 2011, pp. 327(1) - 332(6), 978-86-6055-012-7, Zlatibor, Serbia, 27. - 28. Apr, 2011
Драган Милчић, Мирослав Мијајловић, Ристић Марко, Стевановић Далибор, Милчић Миодраг, Synergy of Educational – Scientific Institutions With Small and Medium Enterprises in Product Development Tasks, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems - IRMES 2011, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems - IRMES 2011, pp. 33 - 38, COBISS.SR-ID 183139340, 978-86-6055-012-7, Zlatibor, Serbia, 27. Apr - 28. Nov, 2011
Драган Милчић, Dragan Kalaba, Dragoljub Živković, Мирослав Мијајловић, Exploitation Researches of the Thermo-Energetic System’s Availability, 15th Symposium on Thermal Science and Engineering of Serbia - SIMTERM 2011, 15th Symposium on Thermal Science and Engineering of Serbia - SIMTERM 2011, pp. 905 - 917 , 978-86-6055-018-9, Sokobanja, Serbia, 18. - 21. Oct, 2011
Пеђа Милосављевић, Драгољуб Живковић, Драган Милчић, POSSIBILITIY OF IMPROVING MAINTENANCE PROCESS IN HEATING PLANTS, Proccedings on CD, 15th Symposium on Thermal Science and Engineering of Serbia, Proccedings on CD, 15th Symposium on Thermal Science and Engineering of Serbia, pp. 519 - 528, 978-86-6055-018-9, Србија, 2011. Драгољуб Живковић, Драган Милчић, Марко Манчић, Moderne tehnologıje za male i mıkro trıgeneracıone sısteme, Zbornik radova: Četrdeset i drugi međunarodni kongres i izložba o grejanju, hlađenju i klimatizaciji (42. International congres on Heating, Ventilation and Climatization), Zbornik radova: Četrdeset i drugi međunarodni kongres i izložba o grejanju, hlađenju i klimatizaciji (42. International congres on Heating, Ventilation and Climatization), pp. 346 - 354, 697(082); 628.8(082); 621.56/.59(082); 620.9(082), 978-86-81505-61-8, Srbija, 2011.
Драгољуб Живковић, Драган Милчић, Дејан Митровић, Марко Манчић, Modern technology for sustainable exploitation of geothermal energy, Proceedings, 15th Symposium on Thermal Science and Engineering of Serbia, Proceedings, 15th Symposium on Thermal Science and Engineering of Serbia, pp. 251 - 260, 978-86-6055-018-9, Srbija, 2011.
Бобан Анђелковић, Драган Милчић, Јелена Стефановић-Мариновић, Милош Милованчевић, Биљана Ђорђевић, About dynamic modeling of suspension in rail vehicles, The 15th International Scientific-Expert Conference on Railways - RAILCON 2012, The 15th International Scientific-Expert Conference on Railways - RAILCON 2012, pp. 45 - 48, 978-86-6055-028-8, Србија, 4. - 5. Oct, 2012
Dragan Milčić, Miroslav Mijajlović, Boban Anđelković, Miodrag Milčić, SOFTWARE SYSTEM FOR CALCULATIONS OF MACHINE PARTS – PROGRAM MODULE FOR FRICTION TRANSMISSIONS CALCULATIONS, COMETa 2012, 1st International scientific conference, COMETa 2012, 1st International scientific conference, pp. 303 - 308, 978-99938-655-5-1, Босна и Херцеговина, 28. - 30. Nov, 2012
Dragoljub Živković, Dragan Milčić, Velimir Stefanović, Marko Mančić, Saša Pavlović, Analysis of energy efficiency of indoor swimming pools using the energy balance method, The Proceedings, 43. International congres on Heating, Ventilation and Climatization), KGH 2012, The Proceedings, 43. International congres on Heating, Ventilation and Climatization), KGH 2012, pp. 289 - 298, 978-86-81505-64-9, Serbia, 2012.
Boban Anđelković, Dragan Milčić, Jelena Stefanović-Marinović, Aca Micić, Biljana Đorđević, ABOUT THE DYNAMIC BEHAVIOR AND THE REGULATION OF NEW TYPE OF WIND TURBINE GEARBOX BASED ON CVT, SIMTERM 2011, SIMTERM 2011, pp. 867 - 875, 978-86-6055-018-9, Serbia, 18. - 21. Oct, 2011
Dragoljub Živković, Marko Mančić, Dragan Milčić, Simulation of hybrid trigeneration plant designed for the demands of a residential building, The Proceedings of the COMETa 2012, 1st International Scientific Conference on Mechanical Engineering, Technologies and Applications, The Proceedings of the COMETa 2012, 1st International Scientific Conference on Mechanical Engineering, Technologies and Applications, pp. 457 - 464, 978-99938-655-5-1, Bosnia and Herzegovina, 2012.
Dragan Milčić, Miroslav Mijajlović, Dragoljub Živković, Slobodan Miladinović, Proračun nosivosti osovina i vratila prema DIN 743, The Proceedings of the COMETa 2012, 1st International Scientific Conference on Mechanical Engineering, Technologies and Applications, The Proceedings of the COMETa 2012, 1st International Scientific Conference on Mechanical Engineering, Technologies and Applications, pp. 277 - 284, 978-99938-655-5-1, Jahorina, B&H, Republika Srpska, 28. - 30. Nov, 2012
Nada Bojić, Dragan Milčić, ISTRAŽIVANJE TERMO-MEHANIČKIH KARAKTERISTIKA KLIZNIH LEŽAJA SA GRAFITOM, The Proceedings of the COMETa 2012, 1st International Scientific Conference on Mechanical Engineering, Technologies and Applications, The Proceedings of the COMETa 2012, 1st International Scientific Conference on Mechanical Engineering, Technologies and Applications, pp. 347 - 354, 978-99938-655-5-1, Jahorina, Bosnia and Herzegovina, 28. - 30. Nov, 2012
Dragan Milčić, Miroslav Mijajlović, Dragan Mitić, Miodrag Milčić, Experimental Investigation of GTAW, GMAW and FSW Welding Processes on Aluminium Alloy 2024, 8th European Conference - Eurojoin 8, 8th European Conference - Eurojoin 8, pp. 331 - 340, 978-953-7518-02-8, Croatia, 24. - 26. May, 2012
Dragoljub Živković, Marko Mančić, Dragan Milčić, DYNAMICAL SIMULATION OF THE ENERGY SYSTEM OF INDOOR SWIMMING POOLS USING TRNSYS SOFTWARE, The Proceedings of the INFOTEH-JAHORINA, 2013, The Proceedings of the INFOTEH-JAHORINA, 2013, pp. 130 - 135, 978-99955-763-1-8, Bosna i Hercegovina, 5. - 8. Jun, 2013
Dragan Milčić, Branislav Popović, Biljana Marković, Dragoljub Živković, Miodrag Milčić, Razvoj elektroventilatora za potrebe automobilske industrije sa aspekta pouzdanosti, Proceedings of the XII International Scientific – Professional Symposium INFOTEH- Jahorina 2013, Proceedings of the XII International Scientific – Professional Symposium INFOTEH- Jahorina 2013, 12, pp. 484 - 489, 978-99955-763-1-8, Jahorina, Bosna i Hercegovina, 20. - 22. Mar, 2013
Vladislav Krstić, Dragan Milčić, Miroslav Mijajlović, Miroslav Vereš, Miodrag Milčić, Experimental Tests on Bound Frequency of Axial Ball Bearings for Fixing the Ball Screws, The 2nd International Conference – Mechanical Engineering in XXI Century - MASING ’13, The 2nd International Conference – Mechanical Engineering in XXI Century - MASING ’13, pp. 217 - 222, 978-86-6055-039-4, Niš, Serbia, 20. - 21. Jun, 2013
Miodrag Milčić, Miroslav Mijajlović Dragan Milčić, Application of TRIZ for Development of the Welding Toll for Friction Stir Welding, The 2nd International Conference – Mechanical Engineering in XXI Century - MASING ’13, The 2nd International Conference – Mechanical Engineering in XXI Century - MASING ’13, pp. 247 - 252, 978-86-6055-039-4, Niš, Serbia, 20. - 21. Jun, 2013
Milena Rajić, Dragoljub Živković, Marko Mančić, Dragan Milčić, Analysis of Dynamic Behaviour of Hot Water Boilers During Start Up, Proceedings of the 16th Symposium on Thermal Science and Engineering of Serbia, SIMTERM2013, Сокобања, Србија, Proceedings of the 16th Symposium on Thermal Science and Engineering of Serbia, SIMTERM2013, Сокобања, Србија, pp. 86 - 94, 978-86- 6055-043-1, Sokobanja, Srbija, 2013.
Dragan Milčić, Amir M. Rashid, Boban Anđelković, ON THE EFFECT OF NORMAL LOAD AND SLIDING SPEED ON WEAR UNDER DRY SLIDING CONTACT ON THE BRASS, The Eighth lnternational Tгiennial Confeгence Heavy Machinery - НМ 2014, The Eighth lnternational Tгiennial Confeгence Heavy Machinery - НМ 2014, pp. B.63 - B.68, 978-86-826З1-74-З, Zlatibor, Serbia, 25. - 28. Jun, 2014
Branislav Popović, Dragan Milčić, Miodrag Milčić, DEVELOPEMENT OF AUTOMOTIVE RADIATOR COOLING FAN, International Congress Motor Vehicles &Motors - Vehicle as a Safety Factor of the Transportation Activity, International Congress Motor Vehicles &Motors - Vehicle as a Safety Factor of the Transportation Activity, pp. 427 - 432, 978-86-6335-010-6, Kragujevac, 9. - 10. Oct, 2014
Vojkan Nojner, Dragan Milčić, SHAPING THE HOUSING OF TRANSMISSION GEAR WITH HIGH SPECIFIC POWER, THE EIGHTH INTERNATIONAL TRIENNIAL CONFERENCE HEAVY MACHINERY - HM 2014, THE EIGHTH INTERNATIONAL TRIENNIAL CONFERENCE HEAVY MACHINERY - HM 2014, pp. E.77 - E.82, 978-86-826З1-74-З, Zlatibor, Serbia, 25. - 28. Jun, 2014
Dragan Milčić, Erdinč Rakipovski, REMOVING OF RELEASING PROBLEM OF FREIGHT CARS OPERATING IN SS REGIME WITH INSTALLING OF BY/PASS, XVI International Scientific-expert Conference on Railways Serbia, XVI International Scientific-expert Conference on Railways Serbia, pp. 229 - 231, 5648-985-698-4, Serbia, 9. - 10. Oct, 2014
Dragan Milčić, Vladislav Krstić, Numerical Analysis of the Thermal Load ofthe Bearing Assembly of Threaded Spindle Realized Using the ZKLN- and ZKLF-Type Bearing, The 3rd International Conference Mechanical Engineering in XXI Century, The 3rd International Conference Mechanical Engineering in XXI Century, pp. 167 - 172, ISBN 978-86-6055-072-1, Serbia, 17. - 18. Sep, 2015
Nada Bojić, Dragan Milčić, Milan Banić, Miodrag Milčić, EFFECT OF COVERAGE OF GRAPHITE ON SELF-LUBRICATING PLAIN BEARINGS, 14TH INTERNATIONAL CONFERENCE ON TRIBOLOGY – SERBIATRIB 2015, 14TH INTERNATIONAL CONFERENCE ON TRIBOLOGY – SERBIATRIB 2015, pp. 309 - 313, 978-86-7083-857-4, 13. - 15. May, 2015
Dragan Milčić, Vladislav Krstić, The Research of Heat Balance of Bearing Mounting Realized by Axial Ball Bearings with Angular Contact Intended For the Threaded Spindles, 17-th Symposium on Thermal Science and Engineering of Serbia, 17-th Symposium on Thermal Science and Engineering of Serbia, pp. 251 - 256, 978-86-6055-076-9, Soko Banja, 20. - 23. Oct, 2015
Dragan Milčić, Erdinč Rakipovski, Tasko Smileski, Miodrag Milčić, RELIABILITY ANALYSIS OF DISTRIBUTOR VALVE OF THE AIR BRAKE SYSTEM, International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology, Banja Luka, International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology, Banja Luka, pp. 825 - 830, -, 978-99938-39-53-8, Republic of Srpska, Bosnia and Herzegovina, 29. - 30. May, 2015
Dragan Milčić, Aleksandar Miltenović, Milan Banić, Miodrag Milčić, Virtual Product Development Process in Education of Mechanical Engineer, The 3rd International Conference MECHANICAL ENGINEERING IN XXI CENTURY, MASING 2015, The 3rd International Conference MECHANICAL ENGINEERING IN XXI CENTURY, MASING 2015, pp. 115 - 120, 978-86-6055-072-1, Ниш, Србија, 17. - 18. Sep, 2015
Milan Banić, Dušan Stamenković, Dragan Milčić, Miloš Milošević, Aleksandar Miltenović, Topology Optimization of Rubber-Metal Springs, The 3rd International Conference MECHANICAL ENGINEERING IN XXI CENTURY, MASING 2015, The 3rd International Conference MECHANICAL ENGINEERING IN XXI CENTURY, MASING 2015, pp. 121 - 124, 978-86-6055-072-1, Ниш, Србија, 17. - 18. Sep, 2015
Dragan Milčić, Vladislav Krstić, Numerical Analysis of the Thermal Load ofthe Bearing Assembly of Threaded Spindle Realized Using the ZKLN- and ZKLF-Type Bearing, The 3rd International Conference MECHANICAL ENGINEERING IN XXI CENTURY, University of Nis Faculty of Mechanical Engineering in Nis, Niš, The 3rd International Conference MECHANICAL ENGINEERING IN XXI CENTURY, University of Nis Faculty of Mechanical Engineering in Nis, Niš, pp. 167 - 172, 978-86-6055-072-1, Niš, 17. - 18. Sep, 2015
Nada Bojić, Dragan Milčić, Milan Banić, Miroslav Mijajlović, Experimental Approach in Estimation of the Friction Coefficient in the Self Lubricating Plain Bearings with Graphite Filler, International Conference MECHANICAL ENGINEERING IN XXI CENTURY, University of Nis Faculty of Mechanical Engineering in Nis, Niš, International Conference MECHANICAL ENGINEERING IN XXI CENTURY, University of Nis Faculty of Mechanical Engineering in Nis, Niš, pp. 179 - 182, 978-86-6055-072-1, Ниш, Србија, 17. - 18. Sep, 2015
Vladislav Krstić, Dragan Milčić, The Research of Heat Balance of Bearing Mounting Realized by Axial Ball Bearings with Angular Contact Intended For the Threaded Spindles, 17th Symposium on Thermal Science and Engineering of Serbia, Sokobanja, 17th Symposium on Thermal Science and Engineering of Serbia, Sokobanja, pp. 251 - 256, 978-86-6055-076-9, Soko Banja, Srbija, 20. - 23. Oct, 2015
Miodrag Milčić, Tomaž Vuherer, Janez Kramberger, Dragan Milčić, Boban Anđelković, PONAŠANJE ZAVARENOG SPOJA LEGURE ALUMINIJUMA 2024 T351 OSTVARENOG ZAVARIVANJEM TRENJEM SA MEŠANJEM PRI UDARNOM LOMU, 3. MEĐUNARODNA NAUČNA KONFERENCIJA COMETa 2016, ”Primijenjene tehnologije u mašinskom inženjerstvu”, Jahorina, 3. MEĐUNARODNA NAUČNA KONFERENCIJA COMETa 2016, ”Primijenjene tehnologije u mašinskom inženjerstvu”, Jahorina, pp. 333 - 340, 978-99976-623-7-8, Istočno Satrajevo, Jahorina, RS, BiH, 7. - 9. Dec, 2016
Amir Mustafa Rashid, Dragan Milčić, Milan Banić, Miodrag Milčić, Tribology beahvior of radial plain bearing made of tin-based white metal alloy TEGOTENAX V840, 15th International Conference on Tribology, SERBIATRIB ´17, 15th International Conference on Tribology, SERBIATRIB ´17, 15, pp. 258 - 266, 0354-8996, 978-86-6335-041-0, Kragujevac, Serbia., 17. - 19. May, 2017
Dragan Milčić, Miodrag Velimirović, Miodrag Milčić, Development of work platforms for maintenance of penstock HPP Pirot, 8th International Scientific Conference, IRMES 2017, 8th International Scientific Conference, IRMES 2017, 8, pp. 329 - 333, 978-9940-527-53-2, Trebinje, Bosnia and Herzegovina, 7. - 9. Sep, 2017
Boban Anđelković, Dragan Milčić, Biljana Đorđević, Miodrag Milčić, Nataša Zdravković, Measuring system for determining SN curve based on Arduino platform, 13th International Conference on Accomplishmentsmin Mechanical and Industrial Engineering, DEMI 2017, 13th International Conference on Accomplishmentsmin Mechanical and Industrial Engineering, DEMI 2017, pp. 577 - 582, 978-99938-39-73-9, Banja Luka, Bosnia and Herzegovina, 26. - 27. May, 2017
Miodrag Milčić, Dragan Milčić, Boban Anđelković, Nataša Zdravković, Design of fixator for vibration testing of welded joints specimens, 13th International Conference on Accomplishmentsmin Mechanical and Industrial Engineering, DEMI 2017, 13th International Conference on Accomplishmentsmin Mechanical and Industrial Engineering, DEMI 2017, pp. 583 - 588, 978-99938-39-73-9, Banja Luka, Bosnia and Herzegovina, 26. - 27. May, 2017
Amir Mustafa Rashid, Dragan Milčić, Miodrag Milčić, Tribological behaviour on tin-based materials - TEGOTENAX840 in oil lubricated conditions, 13th International Conference on Accomplishmentsmin Mechanical and Industrial Engineering, DEMI 2017, 13th International Conference on Accomplishmentsmin Mechanical and Industrial Engineering, DEMI 2017, pp. 619 - 624, 978-99938-39-73-9, Banja Luka, Bosnia and Herzegovina, 26. - 27. May, 2017
Amir Mustafa Rashid, Dragan Milčić, Milan Banić, Miodrag Milčić, The efect of sliding time on state of the lubrication temperature and coeficient of friction of radial plain bearing made from an alloy of TIN - TEGOTENAX V840, 6th International Conference Transport and Logistics, TIL 2017, 6th International Conference Transport and Logistics, TIL 2017, pp. 168 - 175, 978-86-6055-088-2, Niš, Serbia, 25. - 26. May, 2017
Amir Mustafa Rashid, Dragan Milčić, Milan Banić, Goran Radenković, Miodrag Milčić, Experimental investigation of tribological behaviour of journal bearing coated by babbitt alloys TEGOTENAX V840, 9th International Triennal Conference Heavy Machinery, HM 2017, 9th International Triennal Conference Heavy Machinery, HM 2017, pp. D 13 - D 21, 978-86-82631-89-7, Zlatibor, Serbia, 28. Jun - 01. Jul, 2017
Miodrag Milčić, Dragan Milčić, Boban Anđelković, Igor Radisavljević, Aleksandar Živković, Slobodan Jovanović, Friction stir welding of aluminium alloys 2024, 9. INTERNATIONAL SCIENTIFIC-PROFESSIONAL CONFERENCE SBW 2017 „ENGINEERING TECHNOLOGIES IN MANUFACTURING OF WELDED CONSTRUCTIONS AND PRODUCTS, SBW 2017.“, pp. 163 - 175, 978-953-6048-89-2, Slavonski Brod, Croatia., 25. - 27. Oct, 2017
Amir Mustafa Rashid, Dragan Milčić, Milan Banić, S. Al-Basaqr, S. Salih, Comparability of Experimental and Analytical Study of the Effect Radial Load and Rotation Speed on Friction Coefficient of Radial Plain Bearing Under Lubricant Conditions Using Raimondi and Boyd's Charts, Proceedings of 8th International Scientific Conference Research and Development of Mechanical Elements and systems - IRMES 2017, pp. 53 - 58, 978-9940-527-53-2, Требиње, Босна и Херцеговина, 7. - 9. Sep, 2017
Milan Rackov, Ivan Knežević, Siniša Kuzmanović, Vojislav Miltenović, Dragan Milčić, Maja Čavić, Marko Penčić, Josip Temunović, Comparation of Shaft Calculation Methods of Output Shafts in Universal Gear Units, 4th International Conference on Mechanical Engineering in XXI Century (MASING 2018), pp. 155 - 160, 978-86-6055-103-2, Niš, Serbia, 19. - 20. Apr, 2018
Dragan Milčić, Nikola Lazić, Miodrag Milčić, Vojkan Nojner, Software for V-Belt Drives Calculations, The 4 th INTERNATIONAL CONFERENCE MECHANICAL ENGINEERING IN XXI CENTURY,, pp. 151 - 154, 978-86-6055-103-2, Niš, 19. - 20. Apr, 2018
Amir ALSAMMARRAIE, Dragan Milčić, Milan Banić, Miodrag Milčić, Predictions of Wear in Hydrodynamic Journal Bearing Using Artificial Neural Networks, The 4 th INTERNATIONAL CONFERENCE MECHANICAL ENGINEERING IN XXI CENTURY, , pp. 179 - 182, 978-86-6055-103-2, Niš, 19. - 20. Apr, 2018
Miodrag Milčić, Tomaž Vuherer, Igor Radisavljević, Dragan Milčić, Janez Kramberger, Boban Anđelković, Mechanical behaviour of Al 2024 alloy welded by friction stir welding, The 10th International Conference „MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING“, KOD 2018, 6. - 8. Jun, 2018
Dragan Milčić, Tomaž Vuherer, Igor Radisavljević, Miodrag Milčić, Jovan Radovanović, Nataša Zdravković, Effect of FSW Welding Speed on Mechanical Properties of AA2024 T351 Aluminum Alloy, The 4th IIW South – East European Welding Congress “Safe Welded Construction by High Quality Welding“, pp. 1 - 7, 978-86-82585-13-8, Beograd, 10. - 13. Oct, 2018
Boban Anđelković, Amir Al-Sammarraie, Dragan Milčić, Dušan Stamenković, Milan Banić, Jelena Stefanović-Marinović, Biljana Djordjević, Nataša Zdravković, Consideration of the use of artificial intelligence methods for determining the friction coefficient of lubricated sliding bearings, The 10th International Conference „MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING“, KOD 2018, KOD 2018, 6. - 8. Jun, 2018
Nataša Zdravković, Boban Anđelković, Dragan Milčić, Miodrag Milčić, Vukašin Pavlović, Adhesive bonding of railway vehicles and parts, 18th International Scientific-Expert Conference on Railways - RAILCON 18., pp. 225 - 228, 978-86-6055-105-6, Niš, 11. - 12. Oct, 2018
Miodrag Milčić, Zijah Burzić, Igor Radisavljević, Tomaž Vuherer, Dragan Milčić, Vencislav Grabulov, Experimental investigation of fatigue properties of FSW in AA2024-T351, Procedia Structural Integrity, Procedia Structural Integrity, 13, pp. 1977 - 1984, 2452-3216, 2018.
Dragan Mitić, Dragan Milčić, Miodrag Milčić, Nataša Zdravković, EXPERIMENTAL STUDY OF LOAD-CARRYING CAPACITY OF BUTT WELD JOINTS WITH PARTIAL JOINT PENETRATION, pp. 77 - 87, Slavonski Brod, Croatia, 16. - 18. Oct, 2019
Tomaž Vuherer, Janez Kramberger, Dragan Milčić, Miodrag Milčić, Srečko Glodež, Fatigue behaviour of friction stir welded AA-2024 aluminium alloy sheets, IOP Conference Series: Materials Science and Engineering, 659, 1, 1757-8981, Kragujevac, Serbia, 5. - 7. Sep, 2019
Aleksija Đurić, Damjan Klobčar, Dragan Milčić, Biljana Marković, Parameter optimisation and failure load prediction of resistance spot welding of aluminium alloy 5754, IOP Conference Series: Materials Science and Engineering, 659, 1, 1757-8981, Kragujevac, Serbia, 5. - 7. Sep, 2019
Nada Bojić, Ružica Nikolić, Dragan Milčić, Milan Banić, Branislav Hadžima, Extension of the steel sieve during the spherical gun-powder screening, IOP Conference Series: Materials Science and Engineering - 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), 659, 1, Kragujevac, 5. - 7. Sep, 2019
Miodrag Milčić, Tomaž Vuherer, Igor Radisavljević, Zijah Burzić, Ljubica Radović, Dragan Milčić, Nataša Zdravković, The influence of welding speed on mechanical properties of friction stir welded joints of AA2024 T351 aluminum alloy, 9th International Scientific Conference on Defensive Technologies - OTEH 2020, 9, pp. 358 - 363, 978-86-81123-83-6, Beograd, 15. - 16. Oct, 2020
Tomaž Vuherer, Miodrag Milčić, Igor Radisavljević, Zijah Burzić, Dragan Milčić, Ljubica Radović, The effect of welding parameters on behaviour of friction stir welded AA2024–T351 in the conditions of variable load, 9th International Scientific Conference on Defensive Technologies - OTEH 2020, 9, pp. 352 - 357, 978-86-81123-83-6, Beograd, 15. - 16. Oct, 2020
Erdinč Rakipovski, Tasko Smileski, Dragan Milčić, RELIABILITY COMPARISON OF CLASSICAL BRAKE FOR FREIGHT WAGONS AND THE INTEGRATED BOGIE BRAKE TYPE IBB 10, Proceedings of XIX Scientific-Expert Conference on Railways - RAILCON '20, pp. 113 - 116, Niš, 15. - 16. Oct, 2020
Milos Milovančević, Dragan Milčić, Dalibor Petković, ANFIS prediction of mean surface roughness and material removal rate in plasma arc cutting, Mechanical Engineering in the 21st Century" – MASING 2020, Nis, 2020.
Aleksija Đurić, Dragan Milčić, Damjan Klobčar, Joining Lightweight Components by Resistance Element Welding – REW, PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE “MECHANICAL ENGINEERING IN XXI CENTURY” MASING 2020, pp. 191 - 196, 2738-103X, 978-86-6055-139-1, Niš, 9. - 10. Dec, 2020
Filip Miletić, Dragan Milčić, Miloš Tanasijević, Miloš Milovančević, Analiza pouzdanosti dozera angažovanih na površinskim kopovima RB Kolubara, 10th International Conference Coal 2021 (2021), pp. 88-96, http://dr.rgf.bg.ac.rs/s/repo/item/5562 (M33)
Dragan Milčić, Tomaž Vuherer, Ljubica Radović, Miodrag Milčić, Maja Mladenović, Andreja Radovanović, Nenad Radović, MIG welding process on the mechanical properties of butt welded joints of dissimilar aluminum alloys 2024-T351 /6082-T6, 10th International Scientific Conference on Defensive Technologies OTEH 2022, Beograd, 13.-14. Oktobar 2022. pp. 541-547 (M33)
Miodrag Milčić, Dragan Milčić, Nataša Zdravković, Andreja Radovanović, Vladislav Krstić, MECHANICAL AND STRUCTURAL PROPERTIES OF MIG WELDED JOINTS OF DIFFERENT ALUMINUM ALLOYS 2024 T351/6082 T6 IN RAILWAY WAGONS, XX SCIENTIFIC-Expert Conference of Railways - RAILCON '22, October 13-14, 2022, Niš, Proceedings pp. 37-40. (M33).
Milčić,D., Živković,D.:Analiza uticaja relaksacije na vijčanu vezu prirubnica oklopa parnih turbina. 30 godina mašinstva-Niš, Niš, 1990.
Miladinović,S., Milčić,D.: Istraživanje mogućnosti primene i CAD konusnih presovanih sklopova ostvarenih uljem pod pritiskom za vezu zupčanika i vratila kod prenosnika velikih snaga. III Severov simpozijum o mehaničkim prenosnicima, Subotica, 1991.
Živković,D., Milčić,D.: Razmatranje uticaja puzanja na prirubničke spojeve sudova pod pritiskom izloženih visokim temperaturama. Naučni skup "Teška mašinogradnja '93.", Kruševac, Knjiga 2, 1993., s. 372-377.
Đokić,V., Anđelković,B., Milčić,D.: Analiza mogućnosti optimizacije veličine normalne sile u zahvatu kod prenosnog sistema radnih mašina sa prekidnim kretanjem. Naučni skup "Teška mašinogradnja '93.", Kruševac, Knjiga 2, s. 326-329.
Miltenović,V., Milčić, D.: Programski sistem za automatsko projektovanje zupčastih prenosnika. Naučno-stručni skup "ISTRAŽIVANJE I RAZVOJ MAŠINSKIH SISTEMA I ELEMENATA" - IRMES'95, Niš, Knjiga I, s. 305-310.
Milčić,D.: Identifikacija naponsko-deformacionog stanja podnožja zubaca bandažnih zupčanika. Naučno-stručni skup "ISTRAŽIVANJE I RAZVOJ MAŠINSKIH SISTEMA I ELEMENATA"-IRMES'95, Niš, Knjiga I, s. 322-327.
Miladinović,S., Milčić,D.: Proračun elemenata mašinskog sistema korišćenjem statističkih metoda raspodele. Statističke metode u upravljanju totalnim kvalitetom, Zbornik radova, Niš, 1995., s. 199-206.
Milčić,D., Miltenović,V., Miladinović,S.: Primena veštačke inteligencije u izradi konstrukciono tehničke dokumentacije. Međunarodni skup Teška mašinogradnja - TM'96, 1996., Kraljevo, s. 8.25-8.30.
Milčić,D., Miltenović,V., Stevanović,D., Anđelković,B.: CAD sistem za konstriuisanje kliznih ležaja. Međunarodni skup Teška mašinogradnja - TM'96, 1996., Kraljevo, s. 8.49-8.54.
Miltenović,V., Milčić,D., Velimirović,M.: Određivanje pouzdanosti zupčastih prenosnika snage. Medjunarodna konferencija INDUSTRIJSKI SISTEMI IS'96. Novi Sad, 1.10- 3.10.1996, s. 105-110.
Miltenović,V., Milčić,D.: CAD - sistemi za konstruisanje nosioca osnovnih i parcijalnih funkcija mašinskih sistema. Predavanje na seminaru PRIMENA CAD SISTEMA U KONSTRUISANJU-CAD’96, JUDEKO - Niš, oktobar 1996.
Miltenović,V., Velimirović,M., Milčić,D.: Normirani spektri opterećenja kao kriterijum proračuna prenosnika snage motornih vozila. IV Međunarodni naučno-stručni skup "ISTRAŽIVANJE I RAZVOJ U OBLASTI IZVORA I PRENOSA SNAGE MOBILNIH MAŠINA" - IPS'97.,1997., s. 489-496.
Milčić,D., Miladinović,S., Stamenković,N.: Savremeni pristup konstruisanju zupčanika. Zbornik radova šestog Severovog simpozijuma o mehaničkim prenosnicima, Subotica, 15. oktobar 1997., s. 59-64.
Miladinović,S., Milčić,D., Durlević,M.: Konstruisanje kućišta prenosnika. Zbornik radova šestog Severovog simpozijuma o mehaničkim prenosnicima, Subotica, 15. oktobar 1997., s. 207-214.
Milčić,D., Miltenović,V.: Programski sistem za konstruisanje zupčastih prenosnika snage. 4. SIMPOZIJUM O PRIMENI CAD TEHNOLOGIJA SA MEĐUNARODNIM UČEŠĆEM-CAD FORUM, Novi Sad, 19.-21. novembar 1997., s. 273-280.
Miltenović V., Milčić D.: Primena veštačke inteligencije u procesu konstruisanja zupčastih prenosnika snage. Simpozijum o računarskim naukama i informacionim tehnologiijama - YU INFO ‘98, Kopaonik, 23-27.3.1998., s. 1173-1178.
Miltenović,V., Milčić, D.: Terotehnologičnost spojeva vratilo-glavčina. XXIII Jugoslovenski majski skup - “ODRŽAVANJE TEHNIČKIH SISTEMA”. Zbornik radova, Knjiga 1, Kragujevac, 20. - 22. maj 1998., s.227-232.
Miltenović,V., Milčić, D.: Proračun nosivosti zupčastih prenosnika simulacijom eksploatacionih uslova. Naučno-stručni skup “ISTRAŽIVANJE I RAZVOJ MAŠINSKIH ELEMENATA I SISTEMA” - IRMES ‘98, 10. - 11. septembar 1998., Beograd, s.235-240.
Milčić, D., Stamenković, N.: Modularni pristup oblikovanju vratila standardnih zupčastih prenosnika. Naučno-stručni skup “ISTRAŽIVANJE I RAZVOJ MAŠINSKIH ELEMENATA I SISTEMA” - IRMES ‘98, 10. - 11. septembar 1998., Beograd, s.85-90.
Miltenović,V., Milčić, D.: Ekspertni sistem za izbor materijala zupčanika. XXVII Savetovanje proizvodnog mašinstva Jugoslavije, 23.-25. septembar 1998., Niška Banja, CD.
Spasić, D., Milčić, D.: Dimenzionisanje pravouglog poprečnog preseka tela strugarskog noža po kriterijumu pouzdanosti. Zbornik radova Više tehničke škole, Niš, 1998., s.52-57.
Milčić, D., Marković, B.: Primena računara u konstruisanju alata za izradu unutrašnjeg prstena konusno valjčanog ležaja. Peti simpozijum o računarskim naukama i informacionim tehnologijama - YUiNFO ‘99, Kopaonik, 22-26. mart 1999.
Miltenović, V., Stamenković, N., Milčić, D.: Proračun zavrtanjskih veza sa primenom ACTIVEX automatizacije. Peti simpozijum o računarskim naukama i informacionim tehnologijama - YUiNFO ‘99, Kopaonik, 22-26. mart 1999.
Milčić, D., Miltenović, V.: Integrisani sistem za konstruisanje zupčastih prenosnika snage. 5. SIMPOZIJUM O PRIMENI CAD TEHNOLOGIJA-CAD FORUM, Novi Sad, 13.-14. oktobar 1999., s. 91-98.
Miltenović, V., Milčić, D.: Mesto i uloga oblikovanja u procesu konstruisanja. KOD 2000, Novi Sad,
Miltenović, V., Milčić, D.: Koncipiranje zupčastih prenosnika snage primenom neuronske mreže. Naučno-stručni skup “ISTRAŽIVANJE I RAZVOJ MAŠINSKIH ELEMENATA I SISTEMA” - IRMES ‘2000, 10. - 11. septembar 2000., Kotor, s.71-76.
Miltenović, V., Milčić, D.: Termička stabilnost pužnih prenosnika. VI Međunarodni naučno-stručni skup IZVOR I PRENOS SNAGE – IPS 2001, Podgorica – Bečići, 2001, s.519-524.
Milčić, D.: Inteligentni integrisani sistem za konstruisanje univerzalnih zupčastih i pužnih prenosnika snage. VIII SEVER-ov Simpozijum o mehaničkim prenosnicima “SEVER PRENOSNICI 2001”, Subotica, 3 i 4. oktobar 2001., s. 1-8.
Miladinović, S., Milčić, D.: Metodologija proračuna strukturnih elemenata prenosnika radnog točka rotornog bagera. Naučno-stručni skup “ISTRAŽIVANJE I RAZVOJ MAŠINSKIH ELEMENATA I SISTEMA” - JAHORINA-IRMES ‘2002, 19. - 20. septembar 2002., Srpsko Sarajevo-Jahorina, s.649-654.
Milčić, D.: Programski sistem za konstruisanje prenosnika snage. Yu Info 2002, Kopaonik, 2002, CD.
Milčić, D.: CAx alati u procesu oblikovanja proizvoda. Zbornik radova drugog skupa o konstruisanju, oblikovanju i dizajnu KOD 2002, Novi Kneževac, 22. maj 2002., s. 25-30.
Milčić, D., Miltenović, V., Marković, S.: Neuronske mreže i fuzzy logika u dijagnostici mašina. XII Naučna konferencija INDUSTRIJSKI SISTEMI IS 2002, Vrnjačka Banja, 2002.
Miltenović, V., Milčić, D.: Razmatranje oštećenja bokova pužnih parova sa aspekta radne ispravnosti. XII Naučna konferenciju INDUSTRIJSKI SISTEMI IS 2002, Vrnjačka Banja, 2002.
Miltenović, V., Stamenković, D., Milčić, D.: Principi oblikovanja konstrukcija sa aplikacijom na železnička vozila. Zbornik radova X Jugoslovenska konferencija Železnički mašinstvo sa međunarodnim učešćem, Niš, 24.-25. oktobar 2002. s. 87-91.
Milčić, D.: Programski sistem za konstruisanje prenosnika snage kao sredstvo edukacije učenika tehničkih škola, Yu INFO 2003, Kopaonik, Mart 2003, rad na CD.
Milčić, D., Marković, B., Mijajlović, M.: Konstruisanje univerzalnih zupčastih prenosnika kao virtuelni proces, Zbornik radova devetog SEVER-ovog simpozijuma o mehaničkim prenosnicima, Subotica, 10.oktobar 2003., str. 23-28.
Milčić, D., Miltenović, A.: Habanje kao kriterijum nosivosti pužnih parova, Osma internacionalna konferencija o tribologiji, Beograd, 8.-10. oktobar 2003., str. 290-293.
Janošević, D., Milčić, D.: Virtualni razvoj proizvoda, VIII Međunarodna konferencija fleksibilne tehnologije, Novi Sad, 2003, str.89-90.
Milčić, D.: Virtuelno konstruisanje, Seminar CAD/CAE ’04 “RAČUNAROM PODRŽANO KONSTRUISANJE”, 11. februar 2004., Niš, CD.
Milčić, D., Mijajlović, M.: Parametarsko modeliranje delova zupčastog prenosnika snage, Treći skup o konstruisanju, oblikovanju i dizajnu 3. KOD 2004, 19.5.2004., Novi Sad, str. 67-72.
Milčić, D., Živković, D.: Konstruisanje kao virtuelni proces, Zbornik radova sa naučno-stručnog skupa IRMES ’04, Kragujevac, 2004, str. 123-128.
Milčić, D., Stojičić, S., Miltenović, A.: Određivanje parametara pouzdanosti obrtnih postolja šinskih vozila, Zbornik radova sa naučno-stručnog skupa IRMES ’04, Kragujevac, 2004, str. 283-288.
Milčić, D., Milenković, S.: Identifikacija pokazatelja pouzdanosti električnih lokomotiva serije 441, Zbornik radova sa naučno-stručne konferencije o železnici XI ŽELKON ’04, Niš, 2004, str. 161-166.
Miltenović, A., Milčić, D.: Softver za proračun pužnih parova, Zbornik radova, Yu Info 2005, Kopaonik, 2005, CD.
Mijajlović, M., Milčić, D.: Softver za proračun zavrtanjskih veza, Zbornik radova, Yu Info 2005, Kopaonik, 2005, CD.
Milčić, D.: Programski sistem za konstruisanje prenosnika snage PTD 3.0, Zbornik radova, Yu Info 2005, Kopaonik, 2005, CD.
Milčić, D., Milenković, S., Marković, B.: Identifikacija pokazatelja pouzdanosti električnih lokomotiva serije 461, Zbornika radova sa 8. Međunarodna konferencija “UPRAVLJANJE KVALITETOM I POUZDANOŠĆU” DQM-2005, 15-16 jun 2005, Beograd, s.308-317.
Milčić, D., Mijajlović, M., Marković, B.: Sistematsko traženje rešenja problema drvnog otpada, Zbornik radova, 30. JUBILARNO SAVETOVANJE PROIZVODNOG MAŠINSTVA SRBIJE I CRNE GORE 2005. SA MEĐUNARODNIM UČEŠĆEM, Vrnjačka Banja 1-3. septembar 2005, s. 517-522.
Milčić, D., Mijajlović, M.: Primena MONTE-CARLO simulacije u analizi pouzdanosti sistema, Zbornik apstrakata sa 12. Simpozijuma termičara SCG, Sokobanja, 18.-21.10.2005., s.75., radu celini na CD.
M. Mijajlović, D. Milčić, D. Odry: Povećanje pouzdanosti i efikasnosti servisa „Call-A-bike“ primenom dijagnostičko-komunikacionog sistema. Zbornik radova, Yu Info 2006, Kopaonik, 2006, CD.
M. Mijajlović, D. Milčić: Mogućnost rešavanja problema transporta ljudi u svetskim metropolama. Drugi srpski seminar sa međunarodnim učešćem TRANSPORT I LOGISTIKA, Niš, 18.-19.05.2006., s. 19.1-19.4.
D., Milčić, Mijajlović, M.: Parametarsko modeliranje elemenata. 4. Simpozijum sa međunarodnim učešćem „Konstruisanje, oblikovanje i dizajn“, Palić, 30-31. maj 2006., s. 41-44.
M. Mijajlović, D. Milčić: Upravljanje životnim ciklusom tehničkih sistema. Naučno-stručni skup IRMES ’06, Banjaluka-Mrakovica, 21. i 22. septembar 2006., s. 319-324.
D. Milčić, D. Veljanović: Softver za analizu pouzdanosti mašinskih delova i sistema. Naučno-stručni skup IRMES ’06, Banjaluka-Mrakovica, 21. i 22. septembar 2006., s. 411-416.
D., Milčić, Mijajlović, M.: Analiza pouzdanosti obrtnih postolja elektrolokomotiva serije 461. Naučno-stručna konferencija o železnici ŽELKON ’06, Niš, 19.-20.10.2006., s. 79-82.
Mitić, D., Milčić, D., Mijajlović, M.: Zahtevi obezbeđenja kvaliteta zavarenih spojeva na čeličnim konstrukcijama železničkih vozila. Naučno-stručna konferencija o železnici ŽELKON ’06, Niš, 19.-20.10.2006., s. 329-332.
Milčić, D.: Normativna regulisanost obuke zavarivačkog kadra, Seminar “Kvalitet zavarenih konstrukcija”, Zbornik radova, Kruševac, 2007, s. 101-110.
Milčić, D., Mijajlović, M.: Metode konstruisanja termoenergetskih sistema na osnovu pouzdanosti, 13. Simpozijum termičara SCG SIMTERM 07, Zbornik apstrakata, Sokobanja, 2007, CD.
Milošević, V., Milčić, D., Mijajlović, M.: Softver za proračun i modeliranje radijalnih kliznih ležaja, Zbornik radova, Yu Info 2008, Kopaonik, 2008, CD.
Mitić, D., Milčić, D., Momčilović, D.: Tehnologija navarivanja kanala na tramvajskim srcima, Zavarivanje i zavarene konstrukcije, 2008, No. 4, pp. 159-164, ISSN 0354-7965, Beograd, (25. savetovanje sa međunarodnim učešćem „ZAVARIVANJE 2008“, Subotica, 2008, CD.
Milčić, D., Đurić, S. , Radosavljević, Lj.: Značaj inovacije znanja i stručnog usavršavanja i permanentnog obrazovanja za kvalitet i konkurentnost, 32. Savetovanje proizvodnog mašinstva sa međunarodnim učešćem, Novi Sad, 18. – 20. septembar 2008.
Milčić, D., Miladinović, S.: Veza integrisanog programskog sistema za konstruisanje prenosnika snage – PTD sa CAD sistemom. Zbornik radova II deo, Visoka tehnička škola strukovnih studija iz Uroševca, 2008, s. 32-40.
Miladinović, S., Milčić, D.: Eksploataciono merenje obrtnog momenta na radnom točku rotornog bagera u funkciji metodologije proračuna strukturnih elemenata. Zbornik radova II deo, Visoka tehnička škola strukovnih studija iz Uroševca, 2008, s. 41-47.
Milčić, D., Živković, D., Stefanović, V., Banić, M., Mijajlović, M.: Proračun napona i deformacija strukture vrelovodnih kotlova primenom MKE. Zbornik radova, 22. Međunarodni kongres o procesnoj industriji, Beograd, 10-12. VI 2009, CD.
Živković, D., Milčić, D.: Analiza uticaja puzanja na prirubničke spojeve oklopa toplotnih turbina. Zbornik radova, 22. Međunarodni kongres o procesnoj industriji, Beograd, 10-12. VI 2009, CD.
Milčić, D., Mijajlović, M.: Automatizacija procesa proračuna i oblikovanja remenog prenosnika. Zbornik radova, Yu Info 2009, Kopaonik, 2009, CD.
Milčić, D., Živković, D., Stefanović, V., Banić, M., Mijajlović, M.: Termička analiza strukture vrelovodnih kotlova metodom konačnih elemenata, Mašinski fakultet Niš, 14. Simpozijum termičara Srbije, 13.-16. oktobar 2009, Sokobanja, Srbija, rad VIII.4, strana 682 – 691, Zbornik radova na CD-u, ISBN 978-86-80587-96-7.
Milčić, D., Mijajlović, M., Đurđanović, M., Živković, A.: Proces generisanja toplote kod frikcionog zavarivanja sa mešanjem – FSW, Mašinski fakultet Niš, 14. Simpozijum termičara Srbije, 13.-16. oktobar 2009, Sokobanja, Srbija, rad IV.6, strana 338 – 346, Zbornik radova na CD-u, ISBN 978-86-80587-96-7.
Milčić, D., Nikolić, M., Milčić, M.: VEZA SOFTVERA ZA PRORAČUN KAIŠNIH PRENOSNIKA SNAGE I SolidWorks CAD SOFTVERA, Zbornik radova, Yu Info 2010, Kopaonik, 2010, CD, ISBN 978-86-85525-05-6.
Mijajlović, M., Živković, A., Milčić, D., Radisavljević, I.: Uticaj parametara FSW postupka zavarivanja na kvalitet zavarenog spoja aluminijumske legure 5052, Dvadeset šesto savetovanje sa međunarodnim učešćem ZAVARIVANJE 10, 2.6.2010.-4.6.2010, Srbija, planina Tara, Zbornik radova na CD, rad broj 47.
Mijajlović, M., Milčić, D., Đurđanović, M., Mitić, D.: An Overview on FSW and its Application in Railway Vehicle Industry; XIV naučno – stručna konferencija o železnici, Želkon 10, Mašinski fakultet Niš, 7. i 8. oktobar 2010, Niš, Srbija (XIV Scientific – Expert Conference on Railways, Railcon 10, Faculty of Mechanical Engineering, Niš, , 7th and 8th October, 2010, Niš, Serbia), Zbornik radova/Proceedings, str./page 61 – 64, ISBN 978-86-6055-007-3.
Milčić, D., Mijajlović, M., Živković, D.: Analiza pouzdanosti mašinskih delova i sistema u okruženju Microsoft Excel, Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2011, Jahorina, 16.-18. mart 2011, Republika Srpska, Zbornik radova na CD-u. pp.273-277, ISBN 978-99938-624-6-8
Драгољуб Живковић, П. Милосављевић, Д. Милчић, Aspects of energy management within car tyre industry, 3. Regional Conference on Industrial Energy and Environmental Protection in Southeastern Europe, 3. Regional Conference on Industrial Energy and Environmental Protection in Southeastern Europe, Serbia, 21. - 25. Jun, 2011
Dragoljub Živković, Dragan Milčić, Marko V. Mančić: Trigeneracioni sistemi; proizvodnja energije; moderne tehnologije, 42. Međunarodni kongres KGH, Beograd, 30.11–2.12.2011., s. 346-354.
Dragoljub Živković, Peđa Milosavljević, Dragan Milčić, ASPEKTI ENERGETSKOG MENADŢMENTA U INDUSTRIJI AUTOMOBILSKIH GUMA, Treća regionalna konferencija Industrijska energetika i zaštita životne sredine u zemljama jugoistočne Evrope IEEP ’11, Kopaonik, 21. – 25. jun 2011.
Milčić Dragan, Mijajlović Miroslav, Ristić Marko, Stevanović Dalibor, Milčić Miodrag: Synergy of Educational – Scientific Institutions With Small and Medium Enterprises in Product Development Tasks, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems, Proceedings, pp. 33 - 38, 27th & 28th of April, 2011, Zlatibor, Serbia, ISBN 978-86-6055-012-7.
Milčić Dragan, Mijajlović Miroslav: A Study on Work of Dislocated Teams: Virtual Project Realisation, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems, Proceedings, pp. 43 - 48, 27th & 28th of April, 2011, Zlatibor, Serbia, ISBN 978-86-6055-012-7.
Mijajlović Miroslav, Milčić Dragan, Živković Aleksandar, Anđelković Boban: Influence of The Technological Hole in Welding Plates on Weld Creation And Heat Generation During Friction Stir Welding, The 7th International Scientific Conference – Research and Development of Mechanical Elements and Systems, Proceedings, pp. 327 – 332 (typing error in the Proceedings – the paper is paginated as pp. 1 – 6), 27th & 28th of April, 2011, Zlatibor, Serbia, ISBN 978-86-6055-012-7.
Mijajlović Miroslav, Stamenković Dušan, Đurđanović Miroslav, Milčić Dragan: About The Influence of Friction Coefficient on Heat Generation During Friction Stir Welding, SERBIATRIB ’11, 12th International Conference on Tribology, 11th - 13th May 2011, Kragujevac, Serbia, Proceedings, pp. 234-239, ISBN 978-86-86663-74-0.
Dragan Milčić, Miroslav Mijajlović, Dragoljub Živković, Analiza pouzdanosti mašinskih delova i sistema u okruženju Microsoft Excel (Reliability Analysis of Machine Parts And Systems In Environment of Microsoft Excel), International Scientific – Professional Symposium INFOTEH®-JAHORINA 2011, INFOTEH-JAHORINA Vol. 10, Ref. C-8, p. 273-277, March 16 – 18, 2011 Jahorina, Bosnia and Herzegovina, ISBN 978-99938-624-6-8.
Dragan Milčić, Miroslav Mijajlović, Мiodrag Milčić, Dragoljub Živković, Programski sistem za proračun mašinskih elemenata-PTD, XI međunarodni naučno-profesionalni simpozijum Infoteh®-Jahorina 2012, 11, pp. 503 - 508, 978-99938-624-8-2, Jahorina, Bosna i Hercegovina, 21. - 23. Mar, 2012
Мирослав Мијајловић, Драган Милчић, Friction Stir Welding of Aluminium Alloy 2024 T351, Dan varilne tehnike 2012 – zbornik predavanj, Stanje in trendi razvoja v varilni tehniki, Dan varilne tehnike 2012 – zbornik predavanj, Zveza društvo za varilno tehniko Slovenije, Ljubljana, Slovenia, pp. 109 - 114, 621.791(082), 978-961-91552-8-8, Celje, Slovenia, 15. - 18. May, 2012
М. Милчић, Драган Милчић, М. Мијајловић, Н. Здравковић, Virtuelni simulator zavarivanja – trening metod 21. veka u obuci zavarivača, 29. Savetovanje sa međunarodnim učešćem - ZAVARIVANJE 2016, 29. Savetovanje sa međunarodnim učešćem - ZAVARIVANJE 2016, Društvo za unapređivanje zavarivanja u Srbiji (DUZS), Beograd, pp. 244 - 255, 978-86-82585-12-1, Srebrno Jezero, Srbija, 14. - 17. Sep, 2016
Dragan Milčić, Tomaž Vuherer, Miodrag Milčić, Andreja Radovanović, Dragan Mitić, Aleksija Đurić, MECHANICAL PROPERTIES OF BUTT WELDED JOINTS OF DISSIMILARI ALUMINUM ALLOYS 2024-T351 / 6082-T6 OBTAINED BY MIG WELDING, 32. Savetovanje sa međunarodnim učešćem ZAVARIVANJE 2022 12 – 15. oktobar 2022, Hotel Omorika, Tara, CD (M63)
Aleksija Đurić, Dragan Milčić, Damjan Klobčar, Biljana Marković, Miodrag Milčić, JOINING TECHNOLOGY OF STEEL AND ALLUMINUM ALLOY SHEETS – STATE -OF THE ART, 32. Savetovanje sa međunarodnim učešćem ZAVARIVANJE 2022 12 – 15. oktobar 2022, Hotel Omorika, Tara, CD (M63)
Dragan Milčić, Branislav Popović., Dragoljub Živković, Nikolić Nebojša, ELEKTROVENTILATOR MH-150 KL NAMENJEN ZA RASHLAĐIVANJE RASHLADNE TEČNOSTI KOD SUS MOTORA, http://www.masfak.ni.ac.rs/sitegenius/article.php?aid=6113, 2005-2008.
Dragan Milčić, Dragan Mitić, Zoran Petković, TEHNOLOGIJA NAVARIVANJA KANALA SKRETNIČKIH SRCA TRAMVAJSKIH ŠINA U BEOGRADU, http://www.masfak.ni.ac.rs/sitegenius/article.php?aid=6112, 2007-2008.
Dušan Stamenković Miloš Milošević, Nenad T. Pavlović, Dragan Milčić, Milan Banić, VUČNA OPREMA SA GUMENO-METALNIM OPRUŽNIM ELEMENTIMA, http://www.masfak.ni.ac.rs/sitegenius/article.php?aid=6095, 2007-2008.
Miroslav Mijajlović, Dragan Milčić, Slobodan Jovanović, Dragan Jovanović, Radno mesto za eksperimentalna istraživanja postupka zavarivanja trenjem sa mešanjem, 2012.
Д. Милчић, М. Велимировић, Д. Темељковски, В. Николић, М. Милчић, Н. Велимировић, Pokretna platforma namenjena za rad na odrzavanju cevovoda dovodnog sistema HE Pirot, 2015.
Милош Милованчевић, Љубомир Врачар, Бобан Анђелковић, Драган Милчић, Јелена Стефановић-Мариновић, Миодраг Милчић, Embedded дијагностички систем заснован на bluetooth технологији у андроид окружењу, 2015
Милош Милованчевић, Љубомир Врачар, Бобан Анђелковић, Драган Милчић, Јелена Стефановић-Мариновић, Миодраг Милчић, Микроконтролерски интегрисани дијагностички систем, 2015