D. Stamenković, M. Đurđanović "Tribologija presovanih spojeva", (monografija) Mašinski fakultet u Nišu, 2005
D.Stamenković, M. Milošević, M. Mijajlović, M. Banić: Estimation of the static friction coefficient for press fit joints; Journal of the Balkan Tribological Association, Vol. 17 No 3, 2011. ISSN 1310-4772
M. Mijajlović, D. Milčić, D. Stemenković, A. Živković: Mathematical Model for Generated Heat Estimation During Plunging Phase of the FSW Process, TRANSACTIONS OF FAMENA, Faculty of mechanical engineering and naval architecture, University of Zagreb, 2011. ISSN 1333-1124.
D.Stamenković, M. Milošević, M. Mijajlović, M. Banić: Recommendations for the estimation of the strength of the railway wheel set press fit joint, Proceedings of the Institution of Mechanical Engineers, Part F, Journal of Rail and Rapid Transit, Volume 226 Issue 1, 2012. ISSN 0954-4097.
M. Banić, D. Stamenković,V. Miltenović, M. Milošević, M. Rackov: Prediction of Heat Generation in Rubber or Rubber-Metal Springs, Thermal Science 2012, vol. 16, Society of Thermal Engineers of Serbia, 2012. ISBN 0354-9836
M. Milosevic, D. Stamenkovic, A. Milojevic, M. Tomic: Modeling Thermal Effects in Braking Systems of Railway Vehicles, Thermal Science 2012, vol. 16, Society of Thermal Engineers of Serbia, 2012. ISBN 0354-9836
Milošević, M., Banić, M., Stamenković, D., Pavlović, V., Tomić, M., Miltenović, A., Distribution of Generated Friction Heat at Wheel-rail Contact During Wheel Slipping Acceleration, Thermal Science, ISSN: 0354-9836, Vol. 20, Suppl. 5, 2016, pp. 1561-1561, DOI:10.2298/TSCI16S5561M.
Banić, M., Stamenković, D., Miltenović, A., Jovanović, D., Tica, M. Procedure for the Selection of Rubber Compound in Rubber-Metal Springs for Vibration Isolation. POLYMERS (ISSN 2073-4360), 12 (2020), 1737. 10.3390/polym12081737.
Danijela Ristić-Durrant, Muhammad Abdul Haseeb, Milan Banić, Dušan Stamenković, Miloš Simonović, Dragan Nikolić, SMART on-board multi-sensor obstacle detection system for improvement of rail transport safety, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 0954-4097, 10.1177/09544097211032738, 2021.
S. Rosić, D. Stamenković, M. Banić, M. Simonović, D. Ristić-Durrant, C. Ulianov, Analysis of the Safety Level of Obstacle Detection in Autonomous Railway Vehicles, ACTA POLYTECHNICA HUNGARICA 2022 19 (3):187-205, (ISSN 1785-8860), DOI: 10.12700/APH.19.3.2022.3.15
Ivan R. Pavlović, Dušan Stamenković, Vlastimir Nikolić, Aleksandar Miltenović, Nikola Despenić, Marija Stamenković-Atanasov, Goran Janevski, Train Obstacle Detection System Stabilization and Stochastic Vibrations Analysis Using the Moment Lyapunov Exponent Method, ACTA POLYTECHNICA HUNGARICA 2022 19 (6):49-62, (ISSN 1785-8860), DOI:
Petrović, A.D.; Banić, M.; Simonović, M.; Stamenković, D.; Miltenović, A.; Adamović, G.; Rangelov, D. Integration of Computer Vision and Convolutional Neural Networks in the System for Detection of Rail Track and Signals on the Railway. Appl. Sci. 2022, 12, 6045. https://doi.org/10.3390/
Milos Simonović, Milan Banić, Dusan Stamenković, Marten Franke, Kai Michels, Ingo Schoolmann, Danijela Ristic-Durrant, Cristian Ulianov, Sergiu Dan-Stan, Alin Plesa, Marjan Dimec; Towards the enhancement of rail sustainability: Demonstration of Solution for Holistic Approach to Obstacle Detection in Operational Railway Environment; Sustainability 2024, 16, 2613. https://doi.org/10.3390/su16072613
.Stamenković, M.Đurđanović, D.Mitić: Zavarivanje postupkom FSW, ZAVARIVANJE I ZAVARENE KONSTRUKCIJE (2/2006) ISSN 0354-7965, str. 59-66.
M. Đurđanović, M. Mijajlović, D. Milčić, D. Stamenković: Heat Generation During Friction Stir Welding Process, TRIBOLOGY IN INDUSTRY, Volume 31, No. 1&2, 2009. ISSN 0354-8996, p.p. 36-42. Heat Generation During Friction Stir Welding Process
M. Milosevic, D. Stamenkovic, A. Stefanović: A New Generation оf Portable Measurement аnd Data Acquisition System for Analyzing Dynamic Characteristics оf Vehicles, Facta Universitatis, Volume 9, No. 2, 2011. ISSN 0354-2025, p.p. 203-214.
M. Banić, D. Stamenković, M. Milošević, A. Miltenović: Tribology Aspect of Rubber Shock Absorbers Development, Tribology in Industry Vol. 35, No. 3, 2013.ISSN 0354-8996, p.p. 225-231.
D. Stamenković, M. Nikolić, M. Milošević, M. Banić, A. Miltenović, M. Mijajlović: Tribological aspect of rubber based parts used in engineering, TRIBOLOGY IN INDUSTRY, Volume 36, No. 1, 2014, p.p. 9-16.
D. Stamenković: Science in Safety, The bearing tribology has on slips, trips and falls, Health&Safety International, February/March 2014. ISSN 1478-8829, p.p. 59-65.
Stamenković, D., Banić, M., Nikolić, M., Mijajlović, M., Milošević, M., Methods and Principles of Determining the Footwear and Floor Tribological Characteristics, Tribology in Industry, Vol. 39, No. 3 (2017) 340-348, DOI: 10.24874/ti.2017.39.03.09.
Muhammad Abdul, H., Ristić-Durrant, D., Gräser, A., Banić, M., Stamenković D. Multi-DisNet: Machine Learning-Based Object Distance Estimation from Multiple Cameras. In: Tzovaras D., Giakoumis D., Vincze M., Argyros A. (eds) ComputerVisionSystems. ICVS 2019. LectureNotesinComputerScience, vol. 11754 (2019). Springer, Cham. https://doi.org/10.1007/978-3-030-34995-0_41.
Ristić-Durrant, D., MuhammadAbdul, H., Franke, M., Banić, M., Simonović, M., Stamenković, D. Artificial Intelligence for obstacle Detection in Railways: Project SMART and Beyond. In European Dependable Computing Conference, Springer, Cham, 2020, pp. 44-55.
Filip Pešić, Dušan Stamenković, SAVREMENO ODRŽAVANJE SKRETNICA ŽELEZNIČKIH PRUGA, Železnice 2021. br.2, str.77-88, UDK: 656.2+625.1/.55
M.Milošević, D.Stamenković, A. Stefanović: A portable system with GPS for measuring ride quality and vibrations at vehicles, International Congress Motor Vehicles & Motors 2010, SUSTAINABLE DEVELOPMENT OF AUTOMOTIVE INDUSTRY, Proceedings of Papers p.p. 112-117. Kragujevac 2010. ISBN 978-86-86663-57-3
M.Milošević, D.Stamenković, N. Pejčić, D. Radoičić: A Portrable Measuring System for the Measurement and Analysis of Ride Vibrations of Transportation Systems, Proceedings of the X Trennial International Conference on Systems, Automatic Control and Measurements – SAUM 2010, p.p. 170-173. ISBN 978-86-6125-020-0
D.Stamenković, M.Milošević, S.Jovanović, M.Banić, D.Jovanović: Experimental investigation of railway vehicles dynamic characteristics, The International Conference Mechanical Engineering in XXI Century, Niš 2010. ISBN 978-86-6055-008-0
D.Stamenković, M.Mančić, J.Milisavljević: Statistical analysis of measured wheel base, bogie and body accelerations of a railway vehicle, 27th DANUBIA-ADRIA, Symposium on Advances in Experimental Mechanics, Wroclaw/Poland, 2010. ISBN 978-83-87982-59-1
D.Stamenković, J.Milisavljević, M.Mančić: Optimization of rubber-metal springs for railway vehicles, 27th DANUBIA-ADRIA, Symposium on Advances in Experimental Mechanics, Wroclaw/Poland, 2010. ISBN 978-83-87982-59-1
D. Stamenković, M. Milošević, N. Pavlović: Researching and Testing of Rubber-Metal Suspension, The 7th International Scientific Conference Research and Development of Mechanical Elements and Systems - IRMES 2011, p.p. 315-320.
M. Mijajlović D. Stamenković, M. Đurđanović, D. Milčić: About тhe Influence оf Friction оn Heat Generation During Friction Stir Welding, 12th International Conference on Tribology SERBIATRIB ’11, Kragujevac 2011, p.p.234-239, ISBN 978-86-86663-74-0,
M. Banić, D. Stamenković, V. Miltenović, J. Milisavljević: Loss Mechanisms and Efficency of Pushing Metal Belt CVT, 12th International Conference on Tribology SERBIATRIB ’11, Kragujevac 2011, p.p.274-279, ISBN 978-86-86663-74-0,
M. Pavlović, M. Milošević, D. Stamenković, V. Pavlović, A. Stefanović: Automotive Mechatronic Systems – Economy and Ecology, 15th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2011, Faculty of Mechanical Engineering, University of Niš, ISBN 978-86-6055-018-9, p.p.792-801.
D. Stamenković, M. Milošević: From Meeting on Railway Engineering 1984 to Railcon Conference 2012, Proceedings of the 15th International Scientific-Expert Conference on Railways - RAILCON 2012, Niš 2012, ISBN 978-86-6055-028-8, 2012, I-VIII,
Milošević, M, Stamenković, D, Tomić, M, Milojević, A, Mijajlović, M: Modeling thermal effects of the braking process at block-braked railway vehicles, Proceedings of the 15th International Scientific-Expert Conference on Railways - RAILCON 2012, Niš, Serbia, ISBN 978-86-6055-028-8, 2012, 21-24
D. Stamenković, Ž. Đorđević: Modern concept of freight cars maintenance, Proceedings of the 15th International Scientific-Expert Conference on Railways - RAILCON 2012, Niš, Serbia, ISBN 978-86-6055-028-8, 2012,157-160.
M. Banić, D.Stamenković, M.Milošević, A. Miltenović: Tribology aspect of rubber shock absorbers development, 13th International Conference on Tribology – SERBIATRIB 2013, str. 135-140, Kragujevac 2013. ISBN 978-86-86663-98-6,
D.Stamenković, M. Nikolić, M.Milošević, M. Banić, A. Miltenović: Tribological aspect of rubber based parts used in engineering, 13th International Conference on Tribology – SERBIATRIB 2013, p.p. 302-307, Kragujevac 2013. ISBN 978-86-86663-98-6,
M. Mijajlović, D.Stamenković, M. Banić, A. Miltenović, M.Milošević: Friction coefficient estimation during friction stir welding with the single shouldered welding tool, 13th International Conference on Tribology – SERBIATRIB 2013, p.p. 388-395, Kragujevac 2013. ISBN 978-86-86663-98-6
M. Banić, D.Stamenković, V. Miltenović, M.Milošević, A. Miltenović: Implemetation of virtual product development process on rubber-metal springs, The 2nd International Conference Mechanical Engineering in XXI century – MASING 2013, p.p. 227-232, Niš 2013. ISBN 978-86-6055-039-4
M. Mijajlović, D.Stamenković, M. Banić, A. Miltenović, M.Milošević: Friction coefficient estimation during friction stir welding with the single shouldered welding tool, 13th International Conference on Tribology – SERBIATRIB 2013, p.p. 388-395, Kragujevac 2013. ISBN 978-86-86663-98-6
D.Stamenković, M. Nikolić, M.Milošević, M. Banić, A. Miltenović: Tribological aspect of rubber based parts used in engineering, 13th International Conference on Tribology – SERBIATRIB 2013, p.p. 302-307, Kragujevac 2013. ISBN 978-86-86663-98-6
Milenković, M., Milošević, M., Stamenković, D., Pavlović, M., Research of Effectiveness of HHO Production for Use in Internal Combustion Engines, Proceedings of 16th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2013, ISBN 978-86-6055-044-8, Sokobanja, 2013, pp. 727-733.
N.Ivković, D.Stamenković: Design of reference magnets for testing magnetic sensors, Proceedings of XII International SAUM Conference on Systems, Automatic Control and Measurements, ISBN 978-86-6125-117-7, Niš, Serbia, November 12th-14th, 2014, pp.205-218.
A. Miltenović, M. Banić, D.Stamenković, M.Milošević, M. Tomić: Determination of friction heat generation in contact of wheel-rail set using FEM, 16th International Scientific-Expert Conference on Railways - RAILCON 14, Niš, Serbia, ISBN 978-86-6055-060-8, 2014, 21-24.
M.Milošević, M. Milenković, J. Pešić, B. Nikolić, D.Stamenković: Effects of using a supplementary component generated by a catalytic reactor on the combustion of the primary fuel of a loaded diesel generator, The Fifth International Conference, Transport And Logistics TIL 2014, Nis Serbia 2014.
Petrović, N., Stamenković, D., Tarle, Pejčić, S., Vasin, Lj., Milošević, M., Multi-Criteria Analysis of Alternative Propulsion Systems for Vehicles of Public Transport Passengers in Niš, Proceedings of 5th International Conference Transport and Logistics TIL 2014, ISBN 978-86-6055-053-0, Niš, 2014, pp. 135-138.
D.Stamenković, M.Nikolić, Lj.Vasin, M.Banić, A.Miltenović: Research оn tribology phenomena in every day life, 14th International Conference on Tribology – SERBIATRIB 2015, pp. 535 - 542, Beograd 2015.
M.Nikolić, D.Stamenković, M.Milošević, M.Banić: Tribology in human walking, 14th International Conference on Tribology – SERBIATRIB 2015, pp. 543 - 548, Beograd 2015.
M.Banić, D.Stamenković, D.Milčić, M.Milošević, A.Miltenović: Topology optimization of rubber-metal springs, The 3rd International Conference Mechanical Engineering in XXI century – MASING 2015, pp. 121 – 124, Niš 2015.
Stamenković, D., Milošević, M., Banić, M., Testing of Rubber-metal Springs, Proceedings of the 22nd International Conference „Current Problems in Rail Vehicles - PRORAIL 2015“, ISBN 978-80-89276-49-3, Žilina, Slovakia, 2015, pp. 225-232.
Milošević, M., Tjupa, Lj., Nikolić, B., Stamenković, D., Pribak, D., Experimental Research of Effects of Adding Supplementary Component Generated by Catalytic Reactor on Combustion at Gasoline Engines, Proceedings of the 17th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2015, ISBN 978-86-6055-076-9, Sokobanja, 2015, pp. 105-112.
Stamenković, D., Banić, M., Milošević, M., Possibility of Railway Track Condition Monitoring, Proceedings of 21st International Seminar ”Track Maintenance Machines if Theory and Practice - SETRAS 2016”, ISBN 978-80-89276-52-3, Žilina, Slovakia, 2016, pp. 119-125.
Stamenković, D., Milošević, M., Banić, M., Present State of the Railway Industry in Serbia, Proceedings of XVII International Scientific-Expert Conference on Railways RAILCON ‘16, ISBN 978-86-6055-086-8, Niš, 2016, pp. IX-XVI.
Vasin, Lj., Stamenković, D., Mijajlović, M., Milošević, M., Quality of Transport Service at Serbian Railways, Proceedings of XVII International Scientific-Expert Conference on Railways RAILCON ‘16, ISBN 978-86-6055-086-8, Niš, 2016, pp. 89-92.
Bižić, M., Petrović, D., Stamenković. D., Basic aspects of problem of continuous measurement of wheel-rail contct forces, Proceedings of XVII International Scientific-Expert Conference on Railways RAILCON ‘16, ISBN 978-86-6055-086-8, Niš, 2016, pp.5-8.
Stamenković, D., Banić, M., Nikolić, M., Mijajlović, M., Milošević, M., Methods and Principles of Determining the Footwear and Floor Tribological Characteristics, Proceedings of 15th International Conference on Tribology SERIATRIB '17, ISBN 978-86- 6335-041-0, Kragujevac, 2017, pp. 537-545.
D.Stamenković, S.Tarle, Lj.Vasin, N.Petrović: Održivi razvoj saobraćaja u gradovima, 2. konferencija Održivi razvoj i klimatske promene – SUSTAINNIS 2010, Zbornik radova str. 238-243, Niš 2010. SBN 978-86-6055-004-2
M.Milošević, D.Stamenković, D. Pejčić, D.Radojičić, S. Mladenović: Measurement and data acquisition system for analysing dynamic characteristics of railway vehicles, XIV Naučno-stručna konferencija o železnici "ŽELKON '10", str. 29-32, Niš, 2010. ISBN 978-86-6055-007-3
D.Stamenković, M.Milošević, I. Petrov, M.Banić: Razvoj i verifikacija gumeno-metalnih elementa primarnog ogibljenja električnih lokomotiva, XIV Naučno-stručna konferencija o železnici "ŽELKON '10", str. 79-82, Niš 2010. ISBN 978-86-6055-007-3
D.Stamenković, N. Petrović, Lj. Vasin, S.P.Tarle: Primeri savremenih rešenja za izbegavanje i ublažavanje zagušenja saobraćaja u gradovima, The Fourth Symposium with International Participation TRANSPORT AND LOGISTIC, Niš, 2011. Str. 15-19. ISBN 978-86-6055-014-1
D.Stamenković, N. Petrović: Stacionarni dijagnostički sistemi u održavanju železničkih vozila, The Fourth Symposium with International Participation TRANSPORT AND LOGISTIC, Niš, 2011. Str. 63-68. ISBN 978-86-6055-014-1
D. Stamenković, M. Milošević, S. Jovanović, M. Mijajlović, S. Mladenović,
ODBOJNIK SA GUMENO-METALNIM OPRUŽNIM ELEMENTIMA, (industrijski prototip); Korisnik: Fabrika MIN DIV AD SVRLJIG – Svrljig i TIGAR Tehnička guma – Pirot; Rešenje urađeno 2008.god, prihvaćeno od Direkcije za železnicu Republike Srbije izdavanjem Dozvole za korišćenje proizvoda I-01-2 br. 287-08 od 03.11.2008. http://www.masfak.ni.ac.rs/sitegenius/article.php?aid=60
D. Stamenković, M. Milošević, N. T. Pavlović, D. Milčić, M. Banić,
VUČNA OPREMA SA GUMENO-METALNIM OPRUŽNIM ELEMENTIMA, (industrijski prototip); Korisnik: Fabrika MIN DIV AD SVRLJIG – Svrljig i TIGAR Tehnička guma – Pirot; Rešenje urađeno 2008.god, prihvaćeno od Direkcije za železnicu Republike Srbije izdavanjem Dozvole za korišćenje proizvoda I-01-2 br. 288-08 od 03.11.2008. http://www.masfak.ni.ac.rs/sitegenius/article.php?aid=6095
D. Stamenković, M. Milošević, S. Jovanović, M. Banić, M. Mijajlović,
GUMENO-METALNI ELEMENTI PRIMARNOG OGIBLJENJA ELEKTRIČNIH LOKOMOTIVA (bitno poboljšan postojeći proizvod); Korisnik: TIGAR Tehnička guma – Pirot; Rešenje urađeno 2010. god, prihvaćeno od Direkcije za železnicu Republike Srbije izdavanjem Privremene dozvole za korišćenje proizvoda I-01-2 br. 340-595-03/10 od 27.10.2010. http://www.masfak.ni.ac.rs/sitegenius/article.php?aid=6033
ISPITNI STO ZA MERENJE KRUTOSTI GUMENO-METALNIH ELEMENATA PRIMARNOG OGIBLJENJA U TRI PRAVCA; (novo laboratorijsko postrojenje) Korisnik: TIGAR Tehnička guma – Pirot; Rešenje urađeno 2009. god. http://www.masfak.ni.ac.rs/sitegenius/article.php?aid=6034
D. Stamenković, M. Milošević, S. Jovanović, N. T. Pavlović, D. Radoičić,
MERNO-AKVIZICIONI SISTEM ZA ANALIZU DINAMIČKIH KARAKTERISTIKA ŽELEZNIČKIH VOZILA; (novi softver) Korisnik: Mašinski fakultet u Nišu; Rešenje urađeno 2010. god. http://www.masfak.ni.ac.rs/sitegenius/article.php?aid=6035