Dodatne informacije

• Lični podaci

• Datum rođenja: 14.01.1969
• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Mašinski fakultet
• Odsek / Grupa / Smer: Automatsko upravljanje
• Godina diplomiranja: 1993

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  Pavlović, N. T., Pavlović, N. D., Milošević, M., Selection of the Optimal Rigid-Body Counterpart Mechanism in the Compliant Mechanism Synthesis Procedure, Proceedings of MAMM-2016, Ilmenau, Germany, 2016; book chapter in: Microactuators and Micromechanisms, Mechanisms and Machine Science, ISSN 2211-0992, Vol. 45, Springer, 2016, pp. 127-138, DOI 10.1007/978-3-319-45387-3_12.

• Knjige i udžbenici:

  Pavlović, N., Milošević, M., Polužni mehanizmi, Mašinski fakultet u Nišu, Niš, ISBN 978-86-6055-029-5, 2012.

  
  

  Milošević, M., Tjupa, Lj., Komponente mehatroničkih sistema kod vozila, Mašinski fakultet u Nišu, Niš, ISBN 978-86-6055-090-5, 2017.

• Radovi u časopisima sa IMPACT faktorom:

  Petrović, T., Ivanov, I., Milošević, M., A New Structure of Combined Gear Trains with High Transmission Ratios, Forschung im Ingenieurwesen, ISSN 0015-7899, Springer-Verlag, Volume 73, Number 3, 2009, pp. 119-127, DOI 10.1007/s10010-008-0085-9.

  
  

  Stamenković, D., Milošević, M., Mijajlović, M., Banić, M., Estimation of the Static Friction Coefficient for Press Fit Joints, Journal of the Balkan Tribological Association,  ISSN 1310-4772, Vol. 17, No 3, 2011, pp. 341–355.

  
  

  Stamenković, D., Milošević, M., Mijajlović, M., Banić, M., Recommendations for the Estimation of the Strength of the Railway Wheel Set Press Fit Joint, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, ISSN: 0954-4097, Vol 226 Issue 1, 2012. pp. 48-61, DOI: 10.1177/0954409711406370.

  
  

  Banić, M., Stamenković, D., Miltenović, V., Milošević, M., Miltenović, A., Đekić, P., Rackov, M., Prediction of Heat Generation in Rubber or Rubber-Metal Springs, Thermal Science, ISSN: 0354-9836, Vol. 16, Suppl. 2, 2012, pp. 593-606, DOI: 10.2298/TSCI120503189B.

  
  

  Milošević, M., Stamenković, D., Milojević, A.,Tomić, M., Modeling thermal effects in braking systems of railway vehicles, Thermal Science, ISSN: 0354-9836, Vol. 16, Suppl. 2, 2012, pp. 515-526, DOI: 10.2298/TSCI120503188M.

  
  

  Banić, M., Stamenković, D., Milošević, M., Miltenović, A., Tribology Aspect of Rubber Shock Absorbers Development, Tribology in Industry, Series Mechanical Engineering, ISSN 03548996, Vol. 35, No 3, 2013, pp. 242 – 248.

  
  

  Stamenković, D., Nikolić, M., Milošević, M., Banić, M., Miltenović, A., Mijajlović, M., Tribological Aspect of Rubber Based Parts used in Engineering, Tribology in Industry, Series Mechanical Engineering, ISSN 03548996, Vol. 36, No. 1, 2014, pp. 9 – 16.

  
  

  Milošević, M., Banić, M., Stamenković, D., Pavlović, V., Tomić, M., Miltenović, A., Distribution of Fenerated Friction Heat at Wheel-rail Contact During Wheel Slipping Acceleration, Thermal Science, ISSN: 0354-9836, Vol. 20, Suppl. 5, 2016, pp. 1561-1561, DOI:10.2298/TSCI16S5561M.

  
  

  Mijajlović, M., Vidojković, S., Milošević, M., Temperature Dependent Effective Friction Coefficient Estimation in Friction Stir Welding with the Bobbin Tool, Thermal Science, ISSN: 0354-9836, Vol. 20, Suppl. 5, 2016, pp. 1321-1332, DOI: DOI:10.2298/TSCI16S5321M.

  
  

   

• Radovi u ostalim časopisima:

  Milošević, M., Jovanović, S., Structural Analyis of Mechanical on-off Switches Driving Mechanisms,  Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354-2025, Vol. 1, No 5, 1998.

  
  

  Živković, Ž., Marinković, Z., Jovanović, S., Milošević, M., Sinteza i analiza mehanizama za zakretanje obrtnih čepova kod mehaničkih spredera, Časopis TEHNIKA, Br. 2, 1999.

  
  

  Živković, Ž., Milošević, M., Ivanov, I., Analyis of Influence of Parameters on Transfer Functions of Aperiodic Mechanisms,  Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354-2025, Vol. 1, No 6, 1999.

  
  

  Stamenković, D., Jovanović, S., Milošević, M., Investigation of the Press Fit Joints by the Tribology Aspect, Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354-2025, Vol. 1, No 8, 2001.

  
  

  Milošević, M., Milošević, A, Pavlović, N., The Analysis of the Structure of the Mechanism for Lateral Discharge of Containers, Journal of Machine Mechanics, ISSN 0861-9727, Vol. 43, 2002.

  
  

  Milošević, M., Pavlović, N.,  Influence of Clearances in Joints on the Output Error in Path-Generating Mechanisms, Journal of Machine Mechanics, ISSN 0861-9727, Vol. 53, 2004.

  
  

  Milošević, M., Wurmus, H., Živković, Ž., Analyzing Micro-Electro-Mechanical-Fluidic Systems by 2D Coupled-Field Analyses,  Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354-2025, Vol. 2, No 1, 2004.

  
  

  Petrović, T., Ivanov, I., Milošević, M., Energetic Characteristics of a New Solution of the Worm-Planetary Gear Train, Journal of Mechanical Engineering Design, ISSN 1450-5401, Vol. 10, No 2, 2007, pp. 25-30.

  
  

  Pavlović N.T., Pavlović N.D., Milošević, M., Determining of Optimal Dimensions of Compliant Spring Guiding Systems, Journal of Mechanics Engineering and Automation, ISSN 2159-5275, Vol. 1, No 6, 2011, pp. 455-463.   

  
  

  Milošević, M., Stamenković, D., Stefanović, A., New Generation of Portable Measurement and Data Acquisition System for Analysing Dynamic Characteristics of Vehicles, Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354 – 2025, Vol. 9, No 2, 2011, pp. 203 – 214.

  
  

  Stamenković, D., Milošević, M., XV International Scientific-Expert Conference On Railway, Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354 – 2025, Vol. 10, No 2, 2012, pp. 181 - 183.

  
  

  Banić, M., Miltenović, V., Milošević, M., Miltenović, A., Jovanović, N., Heat Generation Prediction in the Railway Draw Gear Rubber-Metal Spring, Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354 – 2025, Vol. 10, No 2, 2012, pp. 171 – 180.

  
  

  Miltenović, A., Banić, M., Stamenković, D., Milošević, M., Tomić, M., Determination of Friction Heat Generation in Wheel-Rail Contact Using FEM, Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354 – 2025, Vol. 13, No 2, 2015, pp. 99 – 108.

  
  

  Nikolić, B., Jovanović, M., Milošević, M., Milanović, S., Function K - as Link Between Fuel Flow Velocity and Fuel Pressure, Depending on the Type of Fuel, Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354 – 2025, Vol. 15, No 1, 2017, pp. 119 – 132, DOI: 10.22190/FUME160628003N.

  
  

  Milošević, M., Miltenović, A., Banić, M., Tomić, M.,  Determination of Residual Stress in Rail Wheel During Quenching Process With FEM Simulation, Journal FACTA UNIVERSITATIS, Series Mechanical Engineering, ISSN 0354 – 2025, 2017.

  
  

  Vukašin Pavlović, Miša Tomić, Miloš Milošević, Lazar Stojanović, A Data Acquisition System for the Wire Tensioning System in the Roboshepherd, Inovative Mechanical Engineering, Vol. 1, No3, 2022, pp. 21-28.

  
  

  Miša Tomić, Nikola Vitković, Vukašin Pavlović, Miloš Milošević, Precise Speed Estimation of the Physically Connected Off-Road Robotized Vehicles, Inovative Mechanical Engineering, Vol. 1, No3, 2022, pp. 29-38.

• Radovi na naučnim skupovima međunarodnog značaja:

  Živković, Ž., Milošević, M., Structural Synthesis of Mechanism for Swivelling the Supporting Plugs in Mechanical Spreaders, Proceedings of the International Symposium "Machines and Mechanisms", Buckurest, Romania, 1997.

  
  

  Živković, Ž., Milošević, M., The Analysis of Transfer Function of Aperiodic Mechanisms, Proceedings of the International Symposium "Machines and Mechanisms", Belgrade, 1997.

  
  

  Marinković, Z., Jovanović, S., Milošević, M., Kinematic Analysis of Mechanism for Swivelling the Supporting Plugs in Mechanical Spreaders, Proceedings of the International Symposium "Machines and Mechanisms", Belgrade, 1997.

  
  

  Petković, Lj., Milošević, M., Numerical Methods and the Theory of Machines and Mechanisms, Proceedings of the International Symposium "Machines and Mechanisms", Belgrade, 1997.

  
  

  Petrović, T., Tasić, Ž., Jovanović, S., Milošević, M., Verwendung der Mechatronischen Systemen zur Erneuerung der Jugoslawischen Industrie, Publikation von WORKSHOP "Mechatronische Systeme - Entwicklungen, Applikationen und Perspektiven", Niš, 2001.

  
  

  Stamenković, D., Jovanović, S., Milošević, M., Strength of Press Fit Joints Considering Tribological Parameters, Proceedings of the 47. IWK, Ilmenau, Germany, 2002.

  
  

  Milošević, M., Milošević, A, Živković, Ž., Software Integration for High Speed Moving Mechanism Modeling, Proceedings of the 47. IWK, Ilmenau, Germany, 2002.

  
  

  Stamenković, D., Milošević, M., Experimental Investigation of Static Friction, Proceedings of the International conference “Power Transmissions ‘03”, Varna, Bulgarien, 2003.

  
  

  Milošević, M., Modeling a Piezoelectric Micropump as a Multi-Disciplinary Micro-Electro-Mechanical-System, Publikation von Sommerschule "Mechatronik", Varna, Bulgarien, 2003.

  
  

  Milošević, M., Živković, Ž., Modeling Physical Effects in a Multi-Disciplinary Piezo-Electrical Micropump by 2D Coupled-Field Analyses, Proceedings of the Forth International Congress “Mechanical Engineering Technologies '04”, Varna, Bulgarien, 2004.

  
  

  Živković, Ž., Milošević, M., Jovanović, S., Structural Synthesis of Driving Systems for Aperiodic Transfer Functions Performing, Proceedings of the 25^th Yugoslav Congress on Theoretical and Applied Mechanics, Novi Sad, 2005.

  
  

  Milošević, M., Živković, Ž., Burgold, J., Helmut, W., Modeling of Coupled Fluid-Dtructure Integration at a High Resolution Microstructured Cantilever Sensor for Fluid Flow Velocities Measuring, Proceedings of the 50. IWK, Ilmenau, Germany, 2005.

  
  

  Živković, Ž., Milošević, M., Milošević, A., Some Aspects of Computer Aided Mechanisms Design, Festschrift zum Ehrenkolloquium anlässlich der Emeritierungen von Univ.-Prof. Dr.-Ing. habil. Dr. h.c. Günter Höhne und Univ.-Prof. Dr.-Ing. habil. Hans-Jürgen Schorcht, Institut für Maschinenelemente und Konstruktion der TU Ilmenau, Ilmenau, Deutschland, 2005.

  
  

  Botiov, J., Helmut, W., Milošević, M., Živković, Ž., Concept for Advanced Micromechanical Modeling and Structuring of Active Microfluidic MEMS in LTCC Materials, Proceedings of MICROSYSTEM Technologies 2005, Munich, Germany, 2005.

  
  

  Krantov, N., Milošević, M., Erstellung eines web-basierten Informationsystems fuer Speicherung von Lehrmaterialien und Durchfuehrung von echtzeitigen Uebungen, Proceedings of 1^st Regional Conference of the Stability Pact Alumni and Project Partners in South Eastern Europe, Struga, Macedonia, 2006.

  
  

  Milošević, M., Stamenković, D., Milošević, A., Research of Absorbed Energy of Rail Vehicle Buffers Filled with Rubber-Metal Springs, Proceedings of 18^th International Conference „Current Problems In Rail Vehicles - PRORAIL 2007“, ISBN 978-80-89276-07-3, Žilina, Slovakia, 2007, pp. 81-88.

  
  

  Živković, Ž., Pavlović, N., Milošević, M., E-learning of Engineering Graphics, Proceedings of WUS Conference “E-learning – Toward Effective Education and Training in the Information Society, Bijela, Montenegro, 2007, pp. 17-23.

  
  

  Randjelović, I., Milošević, M., Petrović, T., Mechatronic Systems for Controlling Variable Valve Timing, Proceedings of IX Triennial International SAUM Conference on Systems, Automatic Control and Measurements, ISBN 978-86-85195-49-5, Niš, 2007, pp. 102-105.

  
  

  Milošević, M., Živković, Ž., Helmut, W., Specific Aspects of Modeling and Simulation of Piezoelectric drop-on-demand Micropumps, Proceedings of 53. IWK, ISBN 978-3-938843-37-6, Ilmenau, Germany, 2008, CD.

  
  

  Stamenković, D., Milošević, A., Milošević, M., Research of Connection of Rolling Stock Primary Rubber Suspension and Ride Quality, Proceedings of 53. IWK, ISBN 978-3-938843-37-6, Ilmenau, Germany, 2008, CD.

  
  

  Milošević, M., Pavlović, D. N., Pavlović, T. N., Stamenković, D., Wireless Sensor Network for Monitoring Passengers Riding Quality in Public Transportation Vehicles, Proceedings of Prosense Seminar Presentations, Ljubljana, Slovenia, 2008, pp. 48-50.

  
  

  Milošević, M., Pavlović, T. N., Pavlović, D. N., International Network in Mechatronics Education, Proceedings of VIPSI-2009, ISBN 978-86-7466-117-3, Belgrade, 2009, pp. 14.

  
  

  Stamenković, D., Milošević, M., Friction at Rubber Metal Springs, Proceedings of 11^th International Conference on Tribology – SERBIATRIB '09, ISBN 978-86-7083-659-4, Belgrade, 2009, pp. 215-219.

  
  

  Milošević, M., Petković, D., Pavlović, N., Development of Mechanism for Inclination of Multifunctional Hospital Bed Head Section, Proceedings of 9^th International Conference ²Research and Development in Mechanical Industry², RaDMI 2009, ISBN 978-86-6075-008-4, Vrnjačka Banja, 2009, pp. 1155-1164.

  
  

  Pavlović N.D., Petrović T., Pavlović N.T., Milošević, M., Jovanović S., Jovanović D., Đordjević B., Development of Multifunctional Hospital Bed, Proceedings of Conference ADP 2010, ISSN 13 10-3946,  Sozopol, Bulgaria, 2010, pp. 418-423.

  
  

  Pavlović, N., Milošević, M., Milojević, A., Computer-Aided Graphical Analysis and Synthesis of Mechanisms, Proceedings of the Conference moNGeometrija 2010, ISBN 978-86-7924-040-8,  Belgrade, 2010, CD.

  
  

  Milošević, M., Petković, D., Pavlović D.N., Development of Mechanism for Legs Position Adjusting at Multifunctional Hospital Bed, Proceedings of 26^th International Conference Scientific Conference “65 Years Faculty of Machine Technology”, ISBN 978-954-438-854-6, Sozopol, Bulgaria, 2010, pp. 321-326.

  
  

  Milošević, M., Stamenković, D., Stefanović, A., A Portable System with GPS for Measuring Ride Quality and Vibrations at Vehicles, Proceedings of International Congress Motor Vehicles & Motors 2010, ISBN 978-86-86663-57-3, Kragujevac, 2010, pp. 112-117.

  
  

  Pavlović D.N., Petrović, T., Pavlović T.N., Milošević, M., Jovanović, S., Jovanović, D., Đordjević, B., A New Solution of the Multifunctional Hospital Bed, Proceedings of International Conference „Mechanical Engineering in XXI Century“, ISBN 978-86-6055-008-0, Niš, 2010, pp. 235-238.

  
  

  Stamenković D, Milošević, M., Jovanović, S., Banić, M., Jovanović, D., Experimental Investigation Of Railway Vehicles Dynamic Characteristics, Proceedings of International Conference „Mechanical Engineering in XXI Century“, ISBN 978-86-6055-008-0, Niš, 2010, pp. 157-160.

  
  

  Milošević, M., Stamenković, D., Pejčić, N., Radojičić, D., Mladenović, S., Measurement and Data Acquisition System for Analysing Dynamic Characteristics of Railway Vehicles, Proceedings of XIV Scientific-Expert Conference on Railways RAILCON ‘10, ISBN 978-86-6055-007-3, Niš, 2010, pp. 29-32.

  
  

  Milošević, M., Stamenković, D., Pejčić, N., Radojičič, D., A Portable Measuring System for the Measurement and Analysis of Ride Vibrations of Transportation Systems, Proceedings of X Triennial International SAUM Conference on Systems, Automatic Control and Measurements, ISBN: 978-86-6125-020-0, Niš, 2010, pp. 170-174.

  
  

  Milošević, M., Mladenović, S., Popić, S., Đorđević, G., Contemporary Approach of Computer Aided Design of Universal Radiography System, Proceedings of International Scientific-expert Conference INFOTEH-JAHORINA 2011, ISBN 99938-624-2-8, Vol. 10, Ref. A-13, East Sarajevo, Bosna and Hercegovina, 2011, pp. 59-63.

  
  

  Stamenković D, Milošević, M., Pavlović, T. N., Researching and Testing of Rubber-Metal Suspension, Proceedings of 7^th International Conference „Research and Development of Mechanical Elements and Systems IRMES 2011“, ISBN 978-86-6055-012-7, Zlatibor, 2011, pp. 563-568.

  
  

  Pavlović, T. N., Pavlović, D. N., Milošević, M., Dimensional synthesis of compliant spring guiding systems, Proceedings of 7^th International Conference „Research and Development of Mechanical Elements and Systems IRMES 2011“, ISBN 978-86-6055-012-7, Zlatibor, 2011, pp. 167-173.

  
  

  Pavlović, D. N., Milošević, M., Pavlović, T. N., Development of Mechanisms for Adjusting Positions of a Multifunctional Bed, Proceedings of the 13^th World Congress on TMM, ISBN 978-607-441-131-7, Guanajuato, Mexico, 2011, A11_337.

  
  

  Pavlović, T. N., Pavlović, D. N., Milošević, M., Design of compliant slider-crank mechanism, Proceedings of 56. IWK, ISBN 978-3-86360-001-3, Ilmenau, Germany, 2011, CD.

  
  

  Pavlović, M., Milošević, M., Stamenković, D., Stefanović, A., Pavlović, V., Automotive Mechatronic Systems – Economy and Ecology, Proceedings of 15^th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2011, ISBN 978-86-6055-018-9, Sokobanja, 2011, pp. 792-801.

  
  

  Pavlović, V., Milošević, M., Pavlović, D. N., Pavlović, M., Jovanović, N., Efficient use of wind energy using wind turbines with CVT drive train, Proceedings of 15^th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2011, ISBN 978-86-6055-018-9, Sokobanja, 2011, pp. 409-416.

  
  

  Stamenković, D., Milošević, M., Research of Rubber Springs for Locomotive Primary Suspension, Proceedings of 20^th International Conference „Current Problems In Rail Vehicles - PRORAIL 2011“, ISBN 978-80-89276-32-5, Žilina, Slovakia, 2011, pp. 163-170.

  
  

  Pavlović, V., Milošević, M., Pavlović, M.,  Đorđević, G., Use of CAD software in developing mechatronic medical devices on example of Treadmill, Proceedings of International Scientific-expert Conference INFOTEH-JAHORINA 2012, ISBN 978-99938-624-8-2, Vol. 11, Ref. PRS-11, East Sarajevo, Bosna and Hercegovina, 2012, pp. 517-521.

  
  

  Banić, M., Miletnović, V., Milošević, M., Miletenović, A., Jovanović, N., Prediction оf Heat Generation in Railway Draw Gear Rubber-Metal Spring, Proceedings of XV International Scientific-Expert Conference on Railways RAILCON ‘12, ISBN 978-86-6055-028-8, Niš, 2012, pp. 21-24.

  
  

  Milošević, M., Stamenković, D., Milojević, A., Tomić, M., Modeling Thermal Effects of The Braking Process at Block-Braked Railway Vehicles, Proceedings of XV International Scientific-Expert Conference on Railways RAILCON ‘12, ISBN 978-86-6055-028-8, Niš, 2012, pp. 113-117.

  
  

  Stamenković, D., Milošević, M., From Meeting on Railway Engineering 1984 to Railcon Conference 2012, Proceedings of XV International Scientific-Expert Conference on Railways RAILCON ‘12, ISBN 978-86-6055-028-8, Niš, 2012, pp. I-VIII. 

  
  

  Jovanović, N., Banić, M., Milošević, M., Pavlović, M., Pavlović, V., Modern Approach in Design of Power Transmission System for Wind Turbine - Model and Simulation, Proceedings of XI International Conference on Systems, Automatic Control and Measurements  - SAUM 2012, ISBN 978-86-6125-072-9, Niš, 2012, pp. 197-200.

  
  

  Pavlović, M., Milošević, M., Pavlović, V., Tomić, M.,  Ćojbašić, Ž., Fuzzy Control of Modeled Inverted Pendulum, Proceedings of XI International Conference on Systems, Automatic Control and Measurements  - SAUM 2012, ISBN 978-86-6125-072-9, Niš, 2012, pp. 172-175.

  
  

  Smiljanić, U., Božić, M., Milošević, M., Đorđević, G., Surgical Table Automation with Integrated Collision Avoidance with Floor or Fixed Table Parts, Proceedings of IX Symposium Industrial Electronics - INDEL 2012, ISBN 978-99955-46-14-4, Banja Luka, Bosna and Hercegovina, 2012, pp. 180-183.

  
  

  Milošević, M., Tomić, M., Milojević, A., Mladenović, S., Đorđević, G., Popić, S., Application of CAD Software for Developing new Radiography Positioner System, Proceedings of International Scientific-expert Conference INFOTEH-JAHORINA 2013, ISBN 99938-624-2-8, Vol. 11, Ref. PRS-13, East Sarajevo, Bosna and Hercegovina, 2013, pp. 547-552.

  
  

  Mijajlović, M., Stamenković, D., Banić, M., Miletenović, A., Milošević, M.,  Friction Coefficient Estimation During Friction Stir Welding with the Single Shouldered Welding Tool, Proceedings of 13^th International Conference on Tribology – SERBIATRIB '13, ISBN 978-86-86663-98-6, Kragujevac, 2013, pp. 388-395.

  
  

  Stamenković, D., Nikolić, M., Milošević, M., Banić, M., Miletenović, A., Mijajlović, M., Tribological Aspect of Rubber Based Parts used in Engineering, Proceedings of 13^th International Conference on Tribology – SERBIATRIB '13, ISBN 978-86-86663-98-6, Kragujevac, 2013, pp. 302-307.

  
  

  Banić, M., Stamenković, D., Milošević, M., Miletenović, A., Tribological Aspect of Rubber Shock Absorbers Development, Proceedings of 13^th International Conference on Tribology – SERBIATRIB '13, ISBN 978-86-86663-98-6, Kragujevac, 2013, pp. 286-291.

  
  

  Milojević, A., Pavlović, D. N., Milošević, M., Tomić, M., New software for synthesis of compliant mechanisms, Proceedings of International Conference „Mechanical Engineering in XXI Century“, ISBN 978-86-6055-039-4, Niš, 2013, pp. 273-278.

  
  

  Banić, M., Stamenković, D., Miltenović, V., Milošević, M., Miletenović, A., Implemetation of virtual product development process on rubber-metal springs, Proceedings of International Conference „Mechanical Engineering in XXI Century“, ISBN 978-86-6055-039-4, Niš, 2013, pp. 227-232.

  
  

  Milošević, M., Pešić, J., Nikolić, B., Milenković, M.,  An Experimental Research of Effects of Adding a Supplementary Component Generated by a Catalytic Reactor on the Combustion of the Primary Fuel at Internal Combustion Engines, Proceedings of 16^th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2013, ISBN 978-86-6055-044-8, Sokobanja, 2013, pp. 408-416.

  
  

  Milenković, M.,  Milošević, M., Stamenković, D., Pavlović, M., Research of Effectiveness of HHO Production for Use in Internal Combustion Engines, Proceedings of 16^th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2013, ISBN 978-86-6055-044-8, Sokobanja, 2013, pp. 727-733.

  
  

  Pavlović, M., Pavlović, V., Tomić, M., Milojević, A., Milošević, M., Tjupa, Lj., Utilization of an Intermittent Motion Mechanism for Energy Harvesting from Vehicle Suspensions, Proceedings of 5^th International Conference Transport and Logistics TIL 2014, ISBN 978-86-6055-053-0, Niš, 2014, pp. 105-108.

  
  

  Milošević, M., Milenković, M., Pešić, J., Nikolić, B., Stamenković, D., Effects of Using a Supplementary Component Generated by a Catalytic Reactor on the Combustion of the Primary Fuel of a Loaded Diesel Generator, Proceedings of 5^th International Conference Transport and Logistics TIL 2014, ISBN 978-86-6055-053-0, Niš, 2014, pp. 113-118.

  
  

  Petrović, N., Stamenković, D., Tarle, Pejčić, S., Vasin, Lj., Milošević, M., Multi-Criteria Analysis of Alternative Propulsion Systems for Vehicles of Public Transport Passengers in Niš, Proceedings of 5^th International Conference Transport and Logistics TIL 2014, ISBN 978-86-6055-053-0, Niš, 2014, pp. 135-138.

  
  

  Milošević, M., Pešić, J., Tjupa, Lj., Nikolić, B., Tomić, V., The Possibility of Using a Supplementary Component For The Combustion Efficiency Of Locomotive Diesel Engines, Proceedings of XVI International Scientific-Expert Conference on Railways RAILCON ‘14, ISBN 978-86-6055-060-8, Niš, 2014, pp. 261-264.

  
  

  Miltenović, A., Banić, M., Stamenković, D., Milošević, M., Tomić, M., Determination of Friction Heat Generation in Contact of Wheel-Rail Set Using FEM, Proceedings of XVI International Scientific-Expert Conference on Railways RAILCON ‘14, ISBN 978-86-6055-060-8, Niš, 2014, pp. 21-24.

  
  

  Milošević, M., Pavlović, V., Tomić, M., Pavlović, M., Banić, M., Utilization of CAD Software for Developing Dlood Filtration System, Proceedings of VIII International Symposium KOD 2014, ISBN 978-86-7892-615-0, Balaton, Hungary, 2014, pp. 93-96.

  
  

  Tomić, M., Milošević, M., Pavlović, V., Milojević, A., Đorđević, G., Control of the Ball and Plate System in Virtual Environment, Proceedings of XII International SAUM Conference on Systems, Automatic Control and Measurements, ISBN 978-86-6125-117-7, Niš, 2014, pp. 213-216.

  
  

  Tomić, V., Marinković, Z., Milošević, M., Nikolić, B., 3D design solution and simulation of a warehouse, case of free zone city of Nis, International conference on traffic and transport engineering ICTTE, ISBN 978-86-916153-1-4, Belgrade, 2014, pp. 109-113.

  
  

  Tomić, V., Nikolić, B., Milanović, S., Milošević, M.,  How to implement European regulations of homologations to vehicle market in Serbia, case of exterior mirrors, International conference on traffic and transport engineering ICTTE, ISBN 978-86-916153-1-4, Belgrade, 2014, pp. 765-771.

  
  

  Milojević, A., Linß, S., Zentner, L., Pavlović, T. N., Pavlović, D. N., Petrović, T., Milošević, M.,  Tomić, M., Optimal design of adaptive compliant mechanisms with inherent actuators comparing discrete structures with continuum structures incorporating flexure hinges, Proceedings of 58. IWK, ISBN 978-3-938843-37-6, Ilmenau, Germany, 2014, URN: urn:nbn:de:gbv:ilm1-2014iwk-141:4.

  
  

  Nikolić, M., Stamenković, D., Milošević, M., Banić, M., Tribology in Human Walking, Proceedings of 14^th International Conference on Tribology – SERBIATRIB '15, ISBN 978-86-7083-857-4, Belgrade, 2015, pp. 543-548.

  
  

  Manojlović, J., Milojević, A., Tomić, M., Pavlović, V., Milošević, M., Tribology in micromechatronical devices, Proceedings of 14^th International Conference on Tribology – SERBIATRIB '15, ISBN 978-86-7083-857-4, Belgrade, 2015, pp. 499-508.

  
  

  Tomić, N., Milošević, M., Tomić, M., Pavlović, V., Milojević, A., Control of Slider-Crank Mechanism in Virtual Environment, Proceedings of the 3^rd  International Conference Mechanical Engineering in XXI century – MASING 2015, ISBN 978-86-6055-072-1, Niš, 2015, pp. 279-282.

  
  

  Milojević, A., Pavlović, D. N., Ćojbašić, Ž., Linss, S., Pavlović, T. N., Milošević, M., Concept of Adaptive Compliant Gripper with Embedded Actuators and Sensors, Proceedings of the 3^rd  International Conference Mechanical Engineering in XXI century – MASING 2015, ISBN 978-86-6055-072-1, Niš, 2015, pp. 263-267.

  
  

  Banić, M., Stamenković, D., Milčić, D., Milošević, M., Miltenović, A., Topology Optimization of Rubber-Metal Springs, Proceedings of the 3^rd  International Conference Mechanical Engineering in XXI century – MASING 2015, ISBN 978-86-6055-072-1, Niš, 2015, pp. 121-124.

  
  

  Dimitrijević, D., Milošević, M., Tomić, M., Pavlović, V., Influence of the Soil Layer on the Roof Membrane in the Green Roof Assembly, Proceedings of 17^th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2015, ISBN 978-86-6055-076-9, Sokobanja, 2015, pp. 756-760.

  
  

  Milošević, M., Tjupa, Lj., Nikolić, B., Stamenković, D., Pribak, D., Experimental Research of Effects of Adding Supplementary Component Generated by Catalytic Reactor on Combustion at Gasoline Engines, Proceedings of the 17^th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2015, ISBN 978-86-6055-076-9, Sokobanja, 2015, pp. 105-112.

  
  

  Nikolić, B., Milić, P., Milošević, M., Milanović, S., Ecological and Economic Aspects of Installing Devices and Equipment for LPG -Fuelled Vehicles, Proceedings of the 17^th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2015, ISBN 978-86-6055-076-9, Sokobanja, 2015, pp. 1115-1122.

  
  

  Marković, D., Petrović, G., Milošević, M., Milić, P., Madić, M., Metaheuristics for Solving Vehicle Routing Problems with Stochastic Demands for Waste Collection, Proceedings of 17^th Symposium on Thermal Science and Engineering of Serbia SIMTERM 2015, ISBN 978-86-6055-076-9, Sokobanja, 2015, pp. 1123-1128.

  
  

  Stamenković, D., Milošević, M., Banić, M., Testing of rubber-metal springs, Proceedings of the 22^nd International Conference „Current Problems in Rail Vehicles - PRORAIL 2015“, ISBN 978-80-89276-49-3, Žilina, Slovakia, 2015, pp. 225-232.

  
  

  Petković, D., Madić, M., Radenković, G., Milošević, M., Application of MCDM Methodes for Automobile’s Bumper Material Selection, Proceedings of the 12^th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology – DEMI 2015, ISBN 978-99938-39-53-8, Banja Luka, Bosnia and Hertzegovina, 2015, pp. 713-718.

  
  

  Madić, M., Radovanović, M., Petković, D., Janković, P., Milošević, M., Prediction of Surface Roughness Using Regression and ANN Models in CO₂ Laser Cutting of Mild Steel, Proceedings of the 12^th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology – DEMI 2015, ISBN 978-99938-39-53-8, Banja Luka, Bosnia and Hertzegovina, 2015, pp. 175-180.

  
  

  Tomić, M., Milošević, M., Tomić, N., Pavlović, V., Pavlović, N. D., Remote Control of Mechatronic Slider-Crank Mechanism, Proceedings of XIII International SAUM Conference on Systems, Automatic Control and Measurements, ISBN 978-86-6125-170-2, Niš, 2016, pp. 207-210.

  
  

  Vasin, Lj., Stamenković, D., Mijajlović, M., Milošević, M., Quality of Transport Service at Serbian Railways, Proceedings of XVII International Scientific-Expert Conference on Railways RAILCON ‘16, ISBN 978-86-6055-086-8, Niš, 2016, pp. 89-92.

  
  

  Milošević, M., Miltenović, A., Banić, M., Tomić, M., Determination of Residual Stress in Rail Wheel During Quenching Process With Fem Simulation, Proceedings of XVII International Scientific-Expert Conference on Railways RAILCON ‘16, ISBN 978-86-6055-086-8, Niš, 2016, pp. 65-68.

  
  

  Stamenković, D., Banić, M., Milošević, M., Possibility of Railway Track Condition Monitoring, Proceedings of 21st International Seminar ”Track Maintenance Machines if Theory and Practice - SETRAS 2016”, ISBN  978-80-89276-52-3, Žilina, Slovakia, 2016, pp. 119-125.

  
  

  Stamenković, D., Banić, M., Nikolić, M., Mijajlović, M., Milošević, M., Methods and Principles of Determining the Footwear and Floor Tribological Characteristics Possibility of Railway Track Condition Monitoring, Proceedings of 15^th International Conference on Tribology SERIATRIB '17, ISBN  978-86-6335-041-0, Kragujevac, 2017, pp. 537-545.

  
  

  Stamenković, D., Vasin, Lj., Milošević, M., Road аnd Rail Freight Transport, Proceedings of 6^th International Conference Transport and Logistics TIL 2017, ISBN 978-86-6055-088-2, Niš, 2017, pp. 187-191.

  
  

  Vukašin Pavlović, Miloš Milošević, Jovana Spasić, Nataša Zdravković, Nevena Tomić, Visual Monitoring Systems in Automobiles and Trains: a Comparison, Proceedings of the 18^th International Scientific - Expert Conference on Railways - RAILCON 18, Niš, 2018, pp. 141-144.

  
  

  Vukašin Pavlović, Miša Tomić, Milan Banić, Miloš Simonović, Miloš Milošević, Design and Control of Wire Tensioning System Using Neural Network, Proceedings of the XV International Conference on Systems, Automatic Control and Measurements - SAUM 2021, Niš, 2021, pp. 98-101.

  
  

   

• Radovi na domaćim naučnim skupovima:

  Milošević M., Pregled konstrukcionih rešenja mehaničkih uključno-isključnih pogonskih mehanizama, Zbornik radova naučno-stručne konferencije „Preventivni inženjering i životna sredina“, Niš, 1995.

  
  

  Milošević M., Nivo buke pri preključivanju mehaničke energije udarnim uključno-isključnim mehanizmima, Zbornik radova naučno-stručne konferencije „Preventivni inženjering i životna sredina“, Niš, 1995.

  
  

  Živković, Ž., Milošević, M., Milošević, A.,  Uticaj kretanjem generisanih opterećenja na konstruisanje elemenata mehanizama, Zbornik radova Više Tehničke škole, Niš, 2001.

  
  

  Milošević, A., Milošević, M., Stamenković, S., Projektovanje i proizvodnja železničkih vozila u virtuelnom okruženju, Zbornik radova X Jugoslovenske konferencije „Železničko mašinstvo“, Niš, 2002.

  
  

  Milošević, M., Živković, Ž., Mehatronički pristup rešavanju problema stabilnosti železničkih vozila, Zbornik radova X Jugoslovenske konferencije „Železničko mašinstvo“, Niš, 2002.

  
  

  Stamenković, D., Milošević, M., Projektovanje računarom mašinskih sistema uzimajući u obzir trenje, Zbornik radova VIII Internacionalne konferencije o tribologiji, Beograd, 2003.

  
  

  Stamenković, D., Jovanović, S., Milošević, M., Metod racionalnog inžinjerskog pristupa za rešavanje problema buke i vibracija u mašinskim postrojenjima, Zbornik radova naučno-stručnog skupa IRMES '04, Kragujevac, 2004.

  
  

  Milošević, A., Milošević, M., Stamenković, S., Integrisani pristup projektovanju železničkih osovinskih sklopova u virtuelnom okruženju, Zbornik radova XI Naučno-stručne Konferencije o Železnici, Niš, 2004.

  
  

  Milošević, M., Pavlović, N. T., Živković, Ž., Projektovanje i izgradnja manevarskih lokomotiva modularnim konceptom, Zbornik radova XI Naučno-stručne Konferencije o Železnici, Niš, 2004.

  
  

  Milošević, A., Stamenković, D., Milošević, M., Kombinovani transport u funkciji energetske efikasnosti, Zbornik radova XII Simpozijum termičara SCG, Sokobanja, 2005.

  
  

  Milošević, M., Stamenković, D., Jovanović, S., Puletić, I., Mladenović, L., Ispitivanje odbojne i vučne opreme sa gumeno-metalnim oprugama, Zbornik radova XII Naučno-stručne Konferencije o Železnici ŽELKON ’06, ISBN 978-86-80587-59-1, Niš, 2006, str. 213-216.

  
  

  Pavlović, N., T., Mijajlović, D., Milošević, M., Primena mehatroničkih odbojnika kod železničkih vozila, Zbornik radova XII Naučno-stručne Konferencije o Železnici ŽELKON ’06, ISBN 978-86-80587-59-1, Niš, 2006, str. 83-86.

  
  

  Milošević, M., Živković, Ž., Arsić, S., Uporedna analiza metoda modeliranja i upravljanja mehatroničkih sistema, Zbornik radova Konferencije „MEHATRONIČKI SISTEMI - Razvoj, primene i perspektive – REMUS ‘06“, ISBN 978-86-80587-63-X, Niš, 2006, str. 101-108.

  
  

  Stamenković, D., Milošević, M., Milošević, A., Mijajlović, M., Dijagnostičko – komunikacioni sistemi u organizaciji prevoza, Zbornik radova Konferencije „MEHATRONIČKI SISTEMI - Razvoj, primene i perspektive – REMUS ‘06“, ISBN 978-86-80587-63-X, Niš, 2006, str. 47-50.

  
  

  Milošević, M., Uticajni parametari prenosnih funkcija apeirodičnih mehanizama, Zbornik radova Simpozijuma ²Mehanizmi i mehatronika², Mašinski fakultet Niš, ISBN 978-86-80587-64-8, Niš, 2006, str. 91-98.

  
  

  Milošević, A., Milošević, M., Projektovanje i proizvodnja mehanizama podržani  računarom, Zbornik radova simpozijuma ²Mehanizmi i mehatronika², Mašinski fakultet Niš, ISBN 978-86-80587-64-8, Niš, 2006, str. 99-104.

  
  

  Milošević, A., Stamenković, D., Milošević, M., Savremeni aspekti primene laserske tehnike u industriji, Zbornik radova Više Tehničke škole, Niš, 2006, str. 1-4.

  
  

  Milošević, A., Stamenković, D., Milošević, M., Pregled odbojnika različitih kategorija kod železničkih vozila, Zbornik radova Više Tehničke škole, Niš, 2006, str. 12-15.

  
  

  Milošević, A., Milošević, M., Stamenković, D., Telematski sistemi u funkciji energetske efikasnosti javnog prevoza, Zbornik radova XIII Simpozijuma termičara Srbije „Energetika, Efikasnost, Ekologija“, ISBN 978-86-80587-80-6, Sokobanja, 2007, CD.

  
  

  Stamenković, D., Milošević, M., Puletić, I., Petrov, I., Petković, M., Eksploataciona ispitivanja odbojne i vučne opreme sa gumeno-metalnim elementima, Zbornik radova XIII Naučno-stručne Konferencije o Železnici ŽELKON ‘08, ISBN 978-86-80587-78-3, Niš, 2008, str. 213-217.

  
  

  Milošević, M., Stamenković, D., Mladenović, S., Istraživanje dinamičkih uslova rada železničkih vozila na prugama Železnica Srbije, Zbornik radova XIII Naučno-stručne Konferencije o Železnici ŽELKON ‘08, ISBN 978-86-80587-78-3, Niš, 2008, str. 217-220.

  
  

  Milošević, M., Mladenović, S., Popić, S., Đorđević, G., Primena savremenih CAE alata u inicijalnim fazama projektovanja konstrukcije i dimenzionisanja pogona medicinskih robota, Zbornik radova naučno-stručnog simpozijuma INFOTEH-JAHORINA 2009, ISBN 99938-624-2-8, Vol. 8, Ref. E1-10, Istočno Sarajevo, Bosna i Hercegovina, 2009, str. 829-833.

  
  

  Kojović, Z., Pavlović, N. D., Pavlović, N. T., Milošević, M., Razvoj automatizovanog multifunkcionalnog bolničkog kreveta, Zbornik radova 9. Kongresa fizijatara Srbije, Subotica, YU ISSN 0350/5952, Vol.33, No. 3, 2009, str. 318.

  
  

  Milošević, M., Stamenković, D., Vasin, Lj., Primena detektorskih sistema u regulisanju saobraćaja, Zbornik radova XIV Simpozijuma termičara Srbije, ISBN 978-86-80587-96-7, Sokobanja, 2009, str. 640-645.

  
  

  Stamenković, D., Milošević, M., Petrov, I., Banić, M., Razvoj i verifikacija gumeno-metalnih elemenata primarnog ogibljenja električnih lokomotiva, Zbornik radova XIV Naučno-stručne Konferencije o Železnici ŽELKON ’10, ISBN 978-86-6055-007-3, Niš, 2010, str.79-82.

  
  

  Đorđević, G., Popić, S., Milošević, M., Analiza i modeliranje haptičkog interfejsa sa dva stepena slobode, Zbornik radova 55. Konferencije ETRAN-a, ISBN: 978-86-80509-66-2, Banja Vrućica, Bosna i Hercegovina, 2011, RO 2.6 1-4.         

• Patenti:

  Pavlović, D. N., Petrović, T., Pavlović, T. N., Milošević, M., Jovanović, S., Đorđević, B., Jovanović, D., Mehanizam koji omogućava automatizovano podešavanje položaja nogu pacijenta na bolničkom krevetu, MP-2011/0001, 2011.

• Tehnička rešenja:

  Stamenković, D., Milošević, M., Jovanović, S., Mijajlović, M., Mladenović, S., Odbojnik sa gumeno-metalnim opružnim elementima, Realizator Mašinski fakultet u Nišu, Korisnik Fabrika TIGAR Tehnička guma Pirot i Fabrika MIN DIV AD SVRLJIG Svrljig, Niš, 2008.

  
  

  Stamenković, D., Milošević, M., Pavlović, T. N., Milčić, D., Banić, M., Vučna oprema sa gumeno-metalnim opružnim elementima, Realizator Mašinski fakultet u Nišu, Korisnik Fabrika TIGAR Tehnička guma Pirot i Fabrika MIN DIV AD SVRLJIG Svrljig, Niš, 2008.

  
  

  Stamenković, D., Milošević, M., Jovanović, S., Radenković, G., Pavlović, T. N., Ispitni sto za merenje krutosti gumeno-metalnih elemenata primarnog ogibljenja u tri pravca, Realizator Mašinski fakultet u Nišu, Korisnik Fabrika TIGAR Tehnička guma Pirot, Niš, 2010.

  
  

  Stamenković, D., Milošević, M., Jovanović, S., Pavlović, T. N., Radoičić, D., Merno-akvizicioni sistem za analizu dinamičkih karakteristika železničkih vozila, Realizator Mašinski fakultet u Nišu, Korisnik Mašinski fakultet u Nišu, Niš, 2010. 

  
  

  Stamenković, D., Milošević, M., Jovanović, S., Banić, M., Mijajlović, M., Gumeno-metalni elementi primarnog ogibljenja električnih lokomotiva, Realizator Mašinski fakultet u Nišu, Korisnik Fabrika TIGAR Tehnička guma Pirot, Niš, 2010. 

  
  

  Pavlović, D. N., Milošević, M., Jovanović, S., Jovanović, D., Pavlović, T. N., Novo rešenje mehanizma za podešavanje položaja nogu pacijenta na bolničkom krevetu, Realizator Mašinski fakultet u Nišu, Korisnik Klinika za fizikalnu medicinu i rehabilitaciju UKC Niš, Niš, 2010. 

  
  

  Pavlović, D. N., Petrović, T., Milošević, M., Jovanović, S., Jovanović, D., Vođenje pokretne platforme sa 3 stepena slobode kretanja realizovano paralelnim aktuatorima, Realizator Mašinski fakultet u Nišu, Korisnik Preduzeće za proizvodnju i trgovinu D.o.o. „NS-Radijatori“ Niš, Niš, 2010.

  
  

  Pеtkоvić, М., Đоrđеvić, G., Мilоšеvić, M., Pоpić, S., Uprаvlјаčkа pаlicа sа mеrnim trаkаmа zа mеrеnjе mоmеntа оkо dvе оsе, Rеаlizаtоr Еlеktrоnski fаkultеt u Nišu, Niš, 2011.

  
  

  Đоrđеvić, G., Pеtrоniјеvić, M., Мitrоvić, N., Pоpić, S., Тоdоrоvić, D., Bоžić, M., Мilоšеvić, M., Јоvаnоvić, D., Аktivni sistеm pоziciоnirаnjа visоkе prеciznоsti primеnоm sinhrоnih mоtоrа u sprеzi master-slave, Rеаlizаtоr Еlеktrоnski fаkultеt u Nišu, Niš, 2011. 

  
  

  Мilоšеvić, M., Milojević, A., Tomić, M., Јоvаnоvić, D., Popić, S., Đоrđеvić, G., Novo rešenje za pozicioniranje radiografskog sistema, Realizator Mašinski fakultet u Nišu, Korisnik Еlеktrоnski fаkultеt u Nišu i Centar za radiologiju Kliničkog centra u Nišu, Niš, 2012. 

  
  

  Pavlović, D. N., Pavlović, T. N., Milošević, M., Jovanović, S., Jovanović, D., Pavlović, V., Pavlović, M., Sistem za promenu napadnog ugla lopatica vetrogeneratora, Realizator Mašinski fakultet u Nišu, Korisnik Mikrotehnika d.o.o Niš, Niš, 2012.

  
  

  Milošević, M., Pavlović, V., Tomić, M., Pavlović, M., Milojević, A., Đorđević, G., Novo rešenje mehanizma za pozicioniranje platformi kod uređaja za filtriranje krvi, Realizator Mašinski fakultet u Nišu, Korisnik Mašinski fakultet u Nišu, LMB Soft Niš, Niš, 2013.

  
  

  Milić, P.,  Nikolić, B., Milošević, M., Milanović, S.,  Marković, S., Petrović, G.,  Marković, D., Tomić, V., Petrović N., Softver za ispitivanje/kontrolisanje motornih vozila sa pogonom na tečni naftni gas, Realizator Mašinski fakultet u Nišu, Korisnik Mašinski fakultet u Nišu – Centar za motore i motorna vozila, Niš, 2014.

  
  

  Milošević, M., Pavlović, V., Tomić, M., Pavlović, M., Milojević, A., Đorđević, G., Novo rešenјe mehanizma za postepeno istiskivanјe produkata krvi iz transfuzionih kesa kod uređaja za separaciju krvi, Realizator Mašinski fakultet u Nišu, Korisnik Mašinski fakultet u Nišu, LMB Soft Niš, Niš, 2014.