Naučne publikacije akademskog osoblja

NAPOMENA

Za tačnost unetih podataka o publikacijama, naučnim i umetničkim referencama odgovorni su autori.
Datum kreiranja: 25.01.2014.

Dragoljub Lazarević

Dodatne informacije

  • Lični podaci

  • Datum rođenja: 27.12.1950.godine
  • Mesto rođenja: Valjevo
  • Obrazovanje

  • Fakultet: Mašinski fakultet u Nišu
  • Odsek / Grupa / Smer: Proizvodno mašinstvo
  • Godina diplomiranja: 1974
  • Spisak publikacija

  • Monografije i poglavlja u monografijama:

    D.Lazarević, Rotaciono izvlačenje cilindričnih i koničnih delova, Monografija, Univerzitet u Nišu, Mašinski fakultet, Niš, 2000., ISBN86-80587-22-2, ID80622348.

  • Knjige i udžbenici:

    D.Lazarević, M.Radovanović, Nekonvencionalne metode, Obrada materijala odnošenjem, Mašinski fakultet u Nišu, 1994.,str.264,SBN 86-80587-02-8, ID 30279180.

  • Radovi u časopisima sa IMPACT faktorom:

    Lazarević A., Lazarević D., Damnjanović Z., Mladenović-Ranisavljević I., Prototype Expert System for Prediction of Plasma Cutting Parameters, TTEM – Technics Technologies Education Management, Journal of Society for Development of Teaching and Business Processes in New Net Environment, Vol. 7 No. 3, pp. 1331-1334, 2012, DRUNPP; ISSN: 1840-1503


    Damnjanović Zvonko, Mančić Dragan, Dašić Predrag, Lazarević Dragoljub, Pantović Radoje , Thermoelastic stress analysis based on infrared thermography, Technics Technologies Education Management-TTEM, 2012, Vol. 7, No. 2, 914-918, ISSN 1840-1503,

  • Radovi u ostalim časopisima:

    -Radovi u časopisu verifikovanom posebnom odlukom:


    Lazarević D., Madić M., Janković P., Lazarević A., Cutting Parameters Optimization for Surface Roughness in Turning Operation of Polyethylene (PE) Using Taguchi Method, Tribology in Industry, Vol. 34 No. 2, pp. 68-73, 2012, University of Kragujevac, Faculty of Engineering, Kragujevac, Serbia; ISSN: 0354-8996


    Dragoljub Lazarević, Predgrag Janković, Miloš Madić, Anđela Lazarević, Robust Conditions for Cutting Force Minimization in Polyamide Turning Process, FME Transactions, ISSN 1451-2092, 2014.


    M. Radovanović, S.Đurić, D.Lazarević,  Perspektva istraživanja u oblasti zupčastih prenosnika u svetlu primene nekonvencionalnih metoda obrade,  Institut IMK “14. Oktobar”, Kruševac, http://scindeks.nb.rs/article.aspx?artid=0354-68290702075R,  "IMK-14" Istraživanje i razvoj, 1-2/2007, Volumen:13, pp. 26-27, , ISBN/ISSN: ISSN 0354-6829,  UDK 621 


    Lazarević D., Madić M., Janković P., Lazarević A., Surface roughness minimization of polyamide PA-6 turning by Taguchi method, Journal of Production Engineering, Vol. 15 No. 1, pp. 29-32, Mart 2012, University of Novi Sad, Faculty of Technical Sciences, Department of Production Engineering, Novi Sad, Serbia; ISSN: 1821-4932


    -Radovi uostalim časopisima:


    Zvonko Damjanović, Dragan Mančić, Dragoljub Lazarević, Radoje Pantović, Infrared Measurement of Thermoelastic Stres on Mechanical Components, Annals of the University of Pitrosani-electrical Engineering Romania, Vol. 14, No. 1, pp.45-51, 2013, ISSN 1454-8518


    D.Lazarević,V.Stoiljković, Pressures, Forces and Torsion Moments on Rolls while Profiling Steel Sheet into U-Profiles, Facta universitatis, series Mechanical Engineering, vol.1,No1,1994.


    M.Radovanovoć, D.Lazarević,Teorijski model određivanja parametara hrapavosti površine obrađene čeonim glodalom, časopis "Tehnika", 1994.god.,


    M.Radovanović, D.Lazarević, Optimizacija procesa čeonog glodanja sa aspekta kvaliteta obrađene površine, časopis "Tehnika", 1994. god.


    D.Lazarević, Toplotni bilans procesa ubrizgavanja rastopine plastomera u kalupnu šupljinu, "SIMOD",Mašinski fakultet, Niš, prihvaćen za objavljivanje,1993.god.,


    M. Radovanović , D. Lazarević , Eksperimentalno istraživanje kvaliteta obradjene površine pri završnoj obradi legura bakra čeonim glodanjem, časopis Tehnika, Mašinstvo 45 (1996) 3-4, str. M57-M62;


    D.Lazarević. Identifikacija uticajnih parametara na kvalitet delova od plastomera pri ubrizgavanjem, časopis ITS Belišće, 2-1990.god.


    D.Lazarević, Mehaničko modeliranje viskoelastičnog materijala, časopis SIMOD, Mašinski fakultet, Niš, 1989.god. 


    D. Lazarević. Relacije između tenzora napona i deformacije za viskoelastične materijale, časopis POLIMERI 4-5, Zagreb,1989.god.


    D. Lazarević. Relacije između tenzora napona i deformacije za viskoelastične materijale, časopis POLIMERI 4-5, Zagreb,1989.god.


    D. Lazarević. Kompleksnost problema tačnosti mera delova od plastomera, časopis ITS-Belišće, Br. 4-5, 1989.godine.


    D. Lazarević, V. Stoiljković, Eksperimentalni analitički prikaz određivanja zavisnosti pokazatelja plastičnosti, zatezne čvrstoće i maksimalnog jediničnog izduženja od temperature i brzine deformacije, Tehnika - mašinstvo br.9 Beograd, 1984. str 1080-1085.

  • Radovi na naučnim skupovima međunarodnog značaja:

    Dragoljub Lazarević, Anđela Lazarević, Vladislav Krstić, Analysis of the Plasma Hardfacing Process, ISBN 978-86-6055-039-4, 2013, pp.67-70, http://www.masfak.ni.ac.rs/sitegenius/topic.php?id=1537


    Dragoljub Lazarević, Anđela Lazarević, Neural networks application for the prediction of technological parameters of plasma cutting process, ISBN 978-86-6055-039-4, 2013, pp. 71-74, http://www.masfak.ni.ac.rs/sitegenius/topic.php?id=1537


    Dragoljub Lazarević, Anđela Lazarević, Production management system in the case of plasma cutting process,  35th International Conference on Production Engineering, Kraljevo, ISBN 978-86-82631-69-9, 2013, pp. 241-246, http://www.mfkv.kg.ac.rs/ocs/index.php/spm/35ISPMS


    Anđela Lazarević, Rade Karamarković, Vladan Karamarković, Dragoljub Lazarević, 16th International Symposium on Thermal Science and Engineering of Serbia–SIMTERM 2013, ISBN 978-86-6055-043-1, 2013, pp.596-600, http://simterm.masfak.ni.ac.rs/index-en.html


    Madić, M., Radovanović, M., Lazarević, D., Artificial neural networks in non-conventional machining processes, Tehnologia Inovativă – Revista “Construcţia de maşini”, Annul 62, Nr. 2, ISSN 0573-7419, Bucharest, Romania, 2010, pp. 17-22,  


    Lazarević D., Lazarević A., Energy and Temperature Distribution during Plasma Cutting, Proceedings of the 7th International Symposium, Machine and Industrial Design in Mechanical Engineering, KOD 2012, 24.-26. May 2012, Balatonfüred, Hungary; ISBN: 978-86-7892-399-9


    Lazarević D., Lazarević A., Artificial neutral networks application for plasma cutting modelling, Proceedings of the 3rd International Conference on Diagnosis and Prediction in Mechanical Engineering Systems, DIPRE’12 (on CD), 31 May – 1. June 2012, Galati, Romania; ISSN: 2285-1887 


    Lazarević A., Manić M., Lazarević D., Energy balance of the plasma arc cutting process, Proceedings on 34th International Conference on Production Engineering, 29.-30. September 2011, Niš, Serbia; ISBN: 978-86-6055-019-6 


    Lazarević D., Madić M., Janković P., Lazarević A., Study on surface roughness minimization in turning of polyamide PA-6 using Taguchi method, Proceedings on 34th International Conference on Production Engineering, 29.-30. September 2011, Niš, Serbia; ISBN: 978-86-6055-019-6


    Lazarević A., Marinković V., Lazarević D., Expanded non linear mathematical models in the theory of experimental design: A Case Study, Proceedings on 10th International Conference Research and Development in Mechanical Industry, RaDMI 2010, Vol. 1, pp. 304-310, 16.-19. September 2010, Donji Milanovac, Serbia; ISBN: 978-86-6075-017-6


    Janković P., Lazaravic A., Lazaravic D., Rezanje plazmom i unapređenja kvaliteta presečne površine, Zbornik radova 33. savetovanja proizvodnog mašinstva Srbije, sa međunarodnim učešćem, pp. 39-42, 16.-17. jun 2009, Beograd, Srbija; ISBN: 978-86-7083-662-4


    Milos Madic, Dragoljub Lazarevic, Miroslav Radovanovic, Application of expert systems and artificial neural networks in manufacturing,  International Conference on Manufacturing Science and Education- MSE, 2009, Sibiu, Romania, 2009


    Milos Madic, Miroslav Radovanovic, Dragoljub Lazarevic, Artificial neural networks in non-conventional machining processes, International Conference on Diagnosis and Prediction in Mechanical Engineering Systems (DIPRE’09), 22 - 23 October 2009,  Romania


    Rančić B., Lazarević A., Lazarević D., Analiza energetskog bilansa kod rezanja plazmom, Zbornik radova 33. savetovanja proizvodnog mašinstva Srbije, sa međunarodnim učešćem, pp. 35-38, 16.-17. jun 2009, Beograd, Srbija; ISBN 978-86-7083-662-4


    Lazarević D., Lazarević A., Heat affected zone in the plasma cutting process, Proceedings on 8th International Conference Research and Development in Mechanical Industry, RaDMI 2008 (on CD), pp. 241-246, 14.-17. September 2008, Užice, Serbia; ISBN: 978-86-83803-23-1


    Lazarević A., Manić M., Lazarević D., Prototype Expert System for Performing the Plasma Cutting Process, Proceedings on 18th International Conference on Production Research (on CD), 31. July - 4. August 2005, University of Salerno, Salerno, Italy; ISSN: 88-87030-96-0


    Lazarević A., Radovanović M., Lazarević D., Mathematical Modeling of Plasma Arc Cutting Process, Proceedings on 5th International Conference Research and Development in Mechanical Industry, RaDMI 2005, pp. 173-179, 4. – 7. September 2005, Vrnjačka Banja, Serbia and Montenegro; ISBN-10 86-83803-20-1 and ISBN-10 978-86-83803-20-0


    Manić M., Lazarević D., Lazarević A., Ekspertni sistem za predikciju tehnoloških parametara procesa rezanja plazmom, Zbornik radova 30. Jubilarno savetovanje proizvodnog mašinstva SCG sa međunarodnim učešćem, pp. 345-352, 1.-3. September 2005, Vrnjačka Banja, Serbia; ISBN: 86-7776-009-1


    D. Lazarević, A.Lazarevic, Mathematical Modelling of Cutting Processing by Plasma, IV Internationl Conferess, Varna, Bulgaria, 2004


    Lazarević D., Rančić B., Lazarević A., Experimental research of the quality of procesing by plama cutting, 4th International Conference "Research and Development in Mechanical Industry" RaDMI 2004, Zlatibor 31. August - 04. September 2004. str. 208-215


    D.Lazarevic, MATHEMATICAL MODELLING OF CUTTING PROCESSING BY PLASMA,  IV INTERNATIONAL CONGRESS“MECHANICAL ENGINEERING TEHNOLOGIES 04”, Varna, Bugarska, 2004.


    D.Lazarevic, EXPERIMENTAL RESEARCH OF THE QUALITY OF PROCESSING BY PLASMA CUTTING,  4th International Conference ²Research and Development in Mechanical Industry² RaDMI 2004, 31. August - 04. September 2004, Zlatibor, Serbia and Montenegro.


    Lazarević D., Lazarević A., Mathematical Modelling of Cutting Processing by Plasma, Proceedings on 4th International Congress, Mechanical Engineering Technologies, MT’04, Vol. 2, pp. 144-147, 23.-25. September 2004, Varna, Bulgaria; ISSN: 1310-3946


    Lazarević D., Rančić B., Lazarević A., Experimental research of the quality of procesing by plama cutting, Proceedings on 4th International Conference Research and Development in Mechanical Industry, RaDMI 2004, pp. 208-215, 31. August - 04. September 2004, Zlatibor, Serbia and Montenegro; ISBN-10 86-83803-17-1 and ISBN-13 978-86-83803-17-0


    Lazarević D., Lazarević A., D.Lazarević, Effect of the Point of Transition from the Injection Pressure to the Subsequent Pressure and of the Subsequent Pressure Duration upon the Pressure curve in the Mould Hollow, Proceedings on 3rd International Conference Research and Development in Mechanical Industry, RaDMI 2003, Vol. 3, 19.-23. September 2003, Herceg Novi, Serbia and Montenegro; ISBN: 86-83803-08-2


    Lazarević D., Lazarević A., Hydraulic forming thorn for rotary construction, Proceedings of 1st National Conference on Recent Advances in Mechanical Engineering, ASME International – Greek Section, 17. – 20. September 2001, Patras, Greece


    Lazarević D., Krstić V., Lazarević A., Drifting of plate by Plasma, Proceedings on 28th International Conference of the Manufacturing Engineering, 21.-23. September 2000, Mataruška Banja, Yugoslavia


    D.Lazarević, Effect of the Point of Transition from the Injection Pressure to the Subsequent Pressure and of the Subsequent Pressure Duration upon the Pressure curve in the Mould Hollow, 3rd Internatinal Conference , Research and Development in Mechanical Industry, Herceg Novi, Serbia and Montenegro, 2003.


    M.Manić, D. Lazarević, Ekspertni sistem za predikciju tehnološkoh parametara sečenja plazmom, 30. Savetovanje proizvodnog mašinstva SCG sa međunaridnim učešćem, Vrnjačka Banja, SCG, Septembar 2005.


    D.Lazarević, M. Manić, A.Lazarević, Prototype expert system for performing the plasma cutting process, 18th International Conference on Production Research, Salerno, Italy, August,  2005.


    D.Lazarevic, Effect of the Point of Transition from the Injection Pressure to the Subsequent Pressure and of the Subsequent Pressure Duration upon the Pressure curve in the Mould Hollow”, 3rd International Conference ²Research and Development in Mechanical Industry² RaDMI 2003, Institute IMK ²14. october² - Kruševac - Hercegnovi, 2003.


    D.Lazarević, Effect of the Point of Transition from the Injection Pressure to the Subsequent Pressure and of the Subsequent Pressure Duration upon the Pressure curve in the Mould Hollow, 3rd Internatinal Conference, Research and Development in Mechanical Industry, Herceg Novi, Serbia and Montenegro, 2003.


    M.Radovanović, A. Lazarević, Parameters Affecting Kerf Quality in Plasma Cutting”, 3rd International Conference ²Research and Development in Mechanical Industry² RaDMI 2003, Institute IMK ²14. october² - Krusevac - Hercegnovi, Serbia and Montenegro, 2003.


    D. Lazarević, Hydraulic shaping thorn for  rotary narrowing, ASME Internacional GREEK Section, University of Patras , Deparment of Mehanical engineering and Aeronautics, Patras, GREECE, September 17-20, 2001.


    D. Lazarević, Drifting of plate by Plasma, International Conference of the Manufecturing Engineering, Mataruska banja, Yugoslavia, 2000.


    D. Lazarević , Analysis of the Uni-direction and Opposite-Direction Procedures of the Cylindrical Part rotary Drawing with the wall Thickness Reduction by the Upper Estimate Method, (ISUMEL) IV-th International Symposium of Ukrainiam Mechanical Engineers in Lviv,  Ukraina, 1999.


    D. Lazarević , Analysis of the Uni-direction and Opposite-Direction Procedures of the Cylindrical Part rotary Drawing with the wall Thickness Reduction by the Upper Estimate Method, (ISUMEL) IV-th International Symposium of Ukrainiam Mechanical Engineers in Lviv,  Ukraina, 1999.


    D.Lazarević, M.Radovanović, Lasersko sećenje, 27.savetovanje proizvodnog mašinstvo Jugoslavije,  Zbornik radova na CD-u, Mšinski fakultet u Nišu,Niš-niška Banja, 1998.


    M.Radovanovic , D.Lazarevic , M.Stošić , Lasersko sečenje i laserske mašine za konturno sečenje lima, VI Medjunarodna konferencija fleksibilne tehnologije MMA'97, Zbornik radova, Fakultet tehničkih nauka Univerziteta u Novom Sadu, Institut za proizvodno mašinstvo, Sombor, 1997, str. 133-139;


    M.Radovanovic , D.Lazarevic , Laser-machines and Laser-robots for Cutting Thin Sheet, International Conference on Mechanical Transmissions and Mechanisms MTM'97, Tianjin University, Tianjin, China, 1997, p. 867-870;


    M. Radovanovic , D.Lazarevic , Experimental Research the Laser Cutting Quality, International Scientific Technical Congress, Mechanical Engineering Technologies MT'97, National House of Science and Technique, Sofia, Bulgaria, 1997;


    D.Lazarević, Analysis of Pressures, Forces and Torsion Moments on  the Rollers while Profiling Steel Sheet into the Trough Shapes, MTM'97 International Conference on Mechanical Transmissions and Mechanisms, Tianjin University, Tianjin, P.R. China, 1997.


    M.Radovanovic , D.Lazarevic , Laser-machines and Laser-robots for Cutting Thin Sheet, International Conference on Mechanical Transmissions and Mechanisms MTM'97, Tianjin University, Tianjin, China, 1997, p. 867-870;


    M.Radovanović, D.Lazarević, Model for Determination Parameters of Roughness Surface treated by end Milling, 3-rd International Symposium of Ukrainian Mechanical Engineers in Lviv, Ukraina, 1997.


    M.Radovanović, D.Lazarević, Laser Machines and Laser Robots for Contour Cutting MM'97, Univerzity of Tianjin, Tianjin, China, 1997., p.867-870.


    D.Lazarević, Analysis of Pressures, Forces and Torsion Moments on  the Rollers while Profiling Steel Sheet into the Trough Shapes, MTM'97 International Conference on Mechanical Transmissions and Mechanisms, Tianjin University, Tianjin, P.R. China, 1997.


    Radovanović Miroslav, Lazarević Dragoljub, Laser Machines and Laser Robots for Contour Cutting MM'97, Univerzity of Tianjin, Tianjin, China, 1997.


    D.Lazarević, Hydraulic forming arbor for rotary contraction, IXth International conference on tools, Miskolc,Mađarsaka, septembar 1996.


    D.Lazarević,V.Stoiljković,M.Radovanović,Determining the Components Forces by Rotary Drawing of Conical Parts AMST ¢96, 4th International Conference on Advanced Manufacturing Systems and Tehnology, Udine, Italija, 1996.


    M.Radovanović, D.Lazarević, Tehnological Aspects of Laser Cutting of Sheet Metals, AMST ¢96, 4th International Conference on Advanced Manufacturing Systems and Tehnology, Udine, Italija, 1996.


    M.Radovanovi D.Lazarević, Working quality of Laser cutting of sheet metals, The 7th International Tribolgy Conference, ROTRIB"96, Bukurešt, Rumunija, 1996.


    M.Radovanovic , D.Lazarevic , Technological Aspects of LASER Cutting of Sheet Metals, 4. International Conference on Advanced Manufacturing Systems and Technology - AMST'96, Udine, Italy, 1996;


    M.Radovanović , D. Lazarević , P.Dašić , Model za odredjivanje funkcija kvaliteta obrade kod laserskog sečenja, 10.Medjunarodna konferencija INDUSTRIJSKI SISTEMI-IS'96, Zbornik radova, Fakultet tehničkih nauka Univerziteta u Novom Sadu, Novi Sad, 1996, str. 67-72; 


    M.Radovanović , D.Lazarević , P.Dašić , Istraživanje kvaliteta obrade kod laserskog sečenja, Prvi medjunarodni simpozijum INDUSTRIJSKO IN@ENJERSTVO'96, Zbornik radova, Mašinski fakultet Univerziteta u Beogradu, Beograd, 1996, str. 335-337;


    D.Lazarević, V.Stoiljković, M.Radovanović, Determining the Components Forces by Rotary Drawing of Conical Parts AMST ¢96, 4th International Conference on Advanced Manufacturing Systems and Tehnology, Udine, Italija, 1996.


    M.Radovanovi D.Lazarević, Working quality of Laser cutting of sheet metals, The 7th International Tribolgy Conference, ROTRIB"96, Bukurešt, Rumunija, 1996.


    D.Lazarević,Analysis of Pressures, Forces and Torsion Moments on Rolls while Profiling Steel Sheet into U-Profiles, The 5th Interntional Conference on metal Forming,The University of Birmingham,UK,1994.


    D.Lazarević,Determining Forces Components by Rotary Drawing of Conical Parts, The 5th Interntional Conference on metal Forming,The University of Birmingham,UK,1994.


    M.Radovanović, D.Lazarević, V.Stoiljkković, Calculation of forses of cotting by volumetrical milling in case when both the widdtih and length are variable, International Symposium of Ukrainin Mechanical Engineers in Lviv, Lviv, Maj 1994.god.


    D.Lazarević,Napruženo-deformovanij stan pri kombinovanomu metodi rotacijonova vitjaganjija cilindričnih detaljej, Inernational Symposium of Ukrainin Mechanical Engineers in Lviv,lviv, May 1993.god.


    D.Lazarević,M.Milenković, J.Stanišić, Karakterizacija aluminijumskih legura za kovanje sa krivama očvršćavanja na povišenim temperaturama, Prvi međunarodni naučno-stručni skup Teška mašinogradnja TM93, Mašinski fakultet u Kraljevu,Vrnjačka Banja, 1993.god.


    D.Lazarević,Hidraulični oblikujući trn za rotaciono sužavanje, Prvi međunarodni naučno-stručni skup Teška mašinogradnja TM93, Mašinski fakultet u Kraljevu, Vrnjačka Banja, 1993.god.


    V.Stoiljković,D.Lazarević,D.Mitrović,M.Milosavljević,CAD/CAM za prosecanje i probijanje. 6.Jugoslovenski simpozijum CAD/CAM,Prohor Pčinjski,1993.god,Zbornik radova,str.61-66.,


    D.Lazarević, V.Stoiljković, M.Radovanović, Analiz tisku, sili i krutnih momentiv na valkah pri vigotovlenni koritopodibnoh profiliv z listovoga metalu, I Meždunarodni ukrainskih inženeriv-mehanikiv u Ljvovi, Ljvovi, Ukraina, 1993.god.

  • Radovi na domaćim naučnim skupovima:

    V.Stoiljković, B.Rančić, D.Lazarević, Prikaz alata za izradu CSV profila na liniji za profilisanje, Zbornik radova, XIV Savetovanje proizvodnog mašinstva Jugoslavije, ^ačak, 1980. str. 385-396 .


    D.Lazarević, Uticaj temperature na zateznu čvrstoću i izduženje nekih legura aluminijuma, Zbornik radova, XVI Savetovanje proizvodnog mašinstva Jugoslavije, Mostar, 1982. str.273-276.


    D.Lazarević, V.Stoiljković, Naponsko-deformaciono stanje i sile pri rotacionom izvlačenju cilindričnih delova bez redukcije debljine zida, Zbornik radova XVII Savetovanje proizvodnog mašinstva Jugoslavije, Titograd 1983. godine, str. 19-22.


    D.Lazarević, Sile pri rotacionom izvlačenju koničnih delova, Zbornik radova XVIII savetovanje proizvodnog mašinstva Jugoslavije, Niš 1984. str.336-376.


    D.Lazarević,Naponsko i deformaciono stanje pri rotacionom izvlačenju koničnih delova,Zbornik radova, Mašinski fakultet, Niš,1985.god,str.74-88.


    D.Lazarević,Naponsko-deformaciono stanje i sile pro rotacionom izvlačenju cilindričnih i koničnih delova sa redukcijom debljine zida, Zbornik radova, XIX Savetovanje proizvodnog mašinstva Jugoslavije, Kragujevac,1985.god,str.558-563.


    D.Lazarević,Naponsko deformaciono stanje i sile pri rotacionom izvlačenju cilindričnih i koničnih delova,Magistarski rad,Mašinski fakultet, Niš,1983.god.


    D.Lazarević, Analiza pritisaka, sila i momenata uvijanja na valjcima pri izradi limenih V-profila, Zbornik radova,XXI Savetovanje proizvodnog mašinstva, Opatija, 1987.god.


    D.Lazarević. Pritisak rastopine plastomera u kalupnoj šupljini tokom procesa ubrizgavanja, Zbornik radova -30 godina Mašinskog fakulteta, Niš, 1990.god.


    D.Lazarević, Analiza opterećenja na valjcima pri izradi limenih U-profila, 23. Savetovanje proizvodnog strojarstva Jugoslavije sa međunarodnim učešćem, Fakultet strojarstva i brodogradnje i sveučilišta u Zagrebu, Zagreb, 1991.god.


    D.Lazarević, M.Radovanović, Analiza pada pritiska u kalupnoj šupljini pri ubrizgavanju plastomera, 24. Savetovanje proizvodnog mašinstva Jugoslavije, Novi Sad, septembar 1992.god.


    D.Lazarević, M.Radovanović, Analiza pritiska, sila i momenata uvijanja na valjcima pri izradi limenih koritastih profila, 24. Savetovanje proizvodnog mašinstva Jugoslavije, Novi Sadi, 1992.god


    Radovanović,V.Marinković,D.Lazarević, Proračun sila rezanja i momenata kod obimnog glodanja, 24. Savetovanje proizvodnog mašinstva, Novi Sad, 1992.god.


    M.Stošić, M.Radovanović,D.Lazarevoć, Teorijski model određivanja hrapavosti površine obrađene CO2 laserom, 24. Savetovanje proizvodnog mašinstva, Novi Sad, 1992.god.


    D.Lazarević, M. Radovanović, Osnovni faktori obrade laserom, 12. Jugoslovenski simpozijum CIM u strategiji tehnološkog razvoja industrije prerade metala, Prohor Pčinjski,1993.god.


    M.Radovanović, D.Lazarević, Model optimizacije čeonog glodanja, 15. Jugoslovenski simpozijum NU,  ROBOTI i FTS, Prohor Pčinjski, 1993.god.


    M.Radovanović, D.Lazarević, Prilog istraživanju kvaliteta obrađene površine pri obradi čeonim glodanjem, 15. Jugoslovenski simpozijum NU, ROBOTI i FTS, Prohor Pčinjski, 1993.god.


    M.Radovanović, LJ.Janković, D.Lazarević,Uticajni faktori na kvalitet laserskog sečenja,25.Savetovanje proizvodnog mašinstva Jugoslavije, Beograd, 1994.godine.


    M.Radovanović, J.Stanić, LJ.Janković, D.Lazarević, P.Dašić,Istraživanje kvaliteta reaza kod laserskog sečenja, 26. Savetovanje proizvodnog mašinstva Jugoslavije, Budva, 1996.


    M.Radovanović, LJ.Janković, D.Lazarević, Uticajni faktori na kvalitet laserskog sečenja, 25. Savetovanje proizvodnog mašinstva Jugoslavije, Beograd, 1995.godine.


    M.Radovanović, D.Lazarević , Kvalitet obrade i tehnološki aspekti obrade laserom, "35 godina Mašinskog fakulteta Univerziteta u Nišu", Zbornik radova Mašinskog fakulteta Univerziteta u Nišu, Niš, 1995, str. 351-357;


    M.Radovanović, D.Lazarević , Odredjivanje hrapavosti površine pomoću lasera, "35 godina Mašinskog fakulteta Univerziteta u Nišu", Zbornik radova Mašinskog fakulteta Univerziteta u Nišu, Niš, 1995, str. 359-364;


    M.Radovanović , LJ.Janković , D.Lazarević , Eksperimentalno istraživanje hrapavosti površine reza kod laserskog sečenja, 22. JUPITER konferencija, Zbornik radova, Mašinski fakultet Univerziteta u Beogradu, Beograd, 1996, str. 5.97-5.102;


    M.Radovanović, D.Lazarević, J.Stanić, LJ.Janković, P.Dašić, Istraživanje kvaliteta reaza kod laserskog sečenja, 26. Savetovanje proizvodnog mašinstva Jugoslavije, Budva, 1996.


    M.Radovanović , D.Lazarević ,G.Radenković , M.Stošić, Karakteristike materijala u zoni laserskog reza, 25. JUPITER konferencija, Mašinski fakultet Univerziteta u Beogradu, Beograd, 1999, str.3.193-3.197


    M. Radovanović, D.Lazarević, Lasersko bušenje, 27. Savetovanje proizvodnog mašinstva Jugoslavije, Zbornik radova na CD-u, Mašinski fakultet Univerziteta u Nišu, Niš-Niška Banja, 1998;

Poslednji put izmenjeno utorak, 03 februar 2015 19:18