Dodatne informacije

• Lični podaci

• Datum rođenja: 10.11.1976.
• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Mašinski fakultet u Nišu
• Odsek / Grupa / Smer: Proizvodno mašinstvo
• Godina diplomiranja: 2003.

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  Trajković, A., Madić, M., & Trifunović, M. (2026). Estimation of Total Operation Time in Turning of a Part with Complex Geometry Using Regression Machine Learning Models. In M. Trajanović, N. Filipovic, & M. Zdravković (Eds.), Transformative Technologies Shaping a Smarter Society, ICIST 2025, Lecture Notes in Networks and Systems, Vol. 1621 (pp. 21-33). Springer, Cham. Print ISBN: 978-3-032-04889-9, Online ISBN: 978-3-032-04890-5, DOI: 10.1007/978-3-032-04890-5_2 (M14)

  
  

  Mitrović, V., Zdravković, M., Trifunović, M., Janković, P., & Madić, M. (2026). Correlation Analysis Between Sound Features and Cutting Force Components in Turning Process. In M. Trajanović, N. Filipovic, & M. Zdravković (Eds.), Transformative Technologies Shaping a Smarter Society, ICIST 2025, Lecture Notes in Networks and Systems, Vol. 1621 (pp. 3-19). Springer, Cham. Print ISBN: 978-3-032-04889-9, Online ISBN: 978-3-032-04890-5, DOI: 10.1007/978-3-032-04890-5_1 (M14)

  
  

  Madić, M., Trifunović, M., Mladenović, G., Nikolić, S., & Kocić, I. (2025). Application of Logistic Regression for Identification of Dross Formation Conditions in CO2 Laser Cutting. In: N. Mitrovic, G. Mladenovic, & A. Mitrovic (Eds.), New Trends in Engineering Research 2024, CNNTech 2024, Lecture Notes in Networks and Systems, Vol. 1216 (pp. 57-66). Springer, Cham. Print ISBN: 978-3-031-78634-1, Online ISBN: 978-3-031-78635-8, DOI: 10.1007/978-3-031-78635-8_7 (M14)

  
  

  Vitković, N., Trajanović, M., Barać, M., Trifunović, M., Stojković, J., Stan, S.D., & Pacurar, R. (2024). Novel Approach for Education in Biomedical Engineering Based on Atomic Learning. In M. Trajanovic, N. Filipovic, & M. Zdravkovic (Eds.), Disruptive Information Technologies for a Smart Society, ICIST 2023, Lecture Notes in Networks and Systems, Vol. 872 (pp. 279-287). Springer, Cham. Print ISBN: 978-3-031-50754-0, Online ISBN: 978-3-031-50755-7, DOI: 10.1007/978-3-031-50755-7_26 (M14).

  
  

  Trifunovic, M., Stojkovic, M., Trajanovic, M., & Manic, M. (2015). Semantic interpretation of geometric and technological features. In F. Cus, V. Gecevska, & F. Chiampo (Eds.), Methods and techniques for industrial development (pp. 145-165). Maribor, Slovenia: Faculty of Mechanical Engineering. ISBN: 978-961-248-493-4 (M14)

• Knjige i udžbenici:

  Stojković, M., Trifunović, M., Ranđelović, S., Stojković, J., Vitković, N., & Turudija, R. (2023). MODELIRANJE TEHNOLOŠKIH OPERACIJA NUMERIČKI UPRAVLJANIH MAŠINA POMOĆU RAČUNARA. Niš, Srbija: Mašinski fakultet u Nišu. ISBN: 978-86-6055-165-0

  
  

  Trifunović , M. (2021). RAČUNAROM PODRŽANA PROIZVODNJA – Praktikum. Niš , Srbija: Mašinski fakultet u Nišu. ISBN: 978-86-6055-146-9

• Radovi u časopisima sa IMPACT faktorom:

  Madić, M., Trifunović, M., Rodić, D., & Marinković, D. (2026). Development of Machine Learning Model for Analysis of Total Manufacturing Cost in Medium Turning of C45E Steel. Metals, 16(4), Article ID: 373, 18 pages, DOI: 10.3390/met16040373 (M22)

  
  

  Mitrović, V., Zdravković, M., Trifunović, M., Madić, M., & Janković, P. (2025). Dataset for exploring relation between sound and cutting forces components in longitudinal turning of C45E steel. Data in Brief, 62, Article ID: 112051, 13 pages, DOI: 10.1016/j.dib.2025.112051 (M22)

  
  

  Trifunović, M., Madić, M., Petrović, G., Marinković, D., & Janković, P. (2025). Fuzzy MCDM Methodology for Analysis of Fibre Laser Cutting Process. Applied Sciences, 15(13), Article ID: 7364, 16 pages. DOI: 10.3390/app15137364 (M21)

  
  

  Rodić, D., Sekulić, M., Savković, B., Madić, M., & Trifunović, M. (2025). Integration of RSM and Machine Learning for Accurate Prediction of Surface Roughness in Laser Processing. Applied Sciences, 15(13), Article ID: 7064, 16 pages. DOI: 10.3390/app15137064 (M21)

  
  

  Stanojković, J., Madić, M., Trifunović, M., Janković, P., & Petković, D. (2025). A novel approach to predicting the cutting force in turning using dimensional analysis. FACTA UNIVERSITATIS Series: Mechanical Engineering, Online First, 21 pages. DOI: 10.22190/FUME241129010S (M21a+)

  
  

  Banic, M., Ristic-Durrant, D., Madic, M., Klapper, A., Trifunovic, M., Simonovic, M., & Fischer, S. (2025). The Use of Earth Observation Data for Railway Infrastructure Monitoring – A Review. Infrastructures, 10(3), Article ID: 66, 27 pages, DOI: 10.3390/infrastructures10030066 (M22)

  
  

  Madić, M., Girdu, C.C., Marinković, D., Janković, P., & Trifunović, M. (2024). Analysis of Kerf Width and its Variation in CO2 Laser Cutting of Straight and Curved Cut Profiles. Tehnički vjesnik – Technical Gazette, 36(6), 1884-1891. DOI: 10.17559/TV-20240717001856 (M22)

  
  

  Milovanović, J., Stojković, M., Trifunović, M., & Vitković, N. (2023). Review of Bone Scaffold Design Concepts and Design Methods. FACTA UNIVERSITATIS, Series: Mechanical Engineering, 21(1), 151-173. DOI: 10.22190/FUME200328038M (M21a+)

  
  

  Trifunović, M., Madić, M., Marinković, D., & Marinković, V. (2023). Cutting Parameters Optimization for Minimal Total Operation Time in Turning POM-C Cylindrical Stocks into Parts with Continuous Profile Using a PCD Cutting Tool. Metals, 13(2), Article ID: 359, 19 pages. DOI: 10.3390/met13020359 (M22)

  
  

  Stojkovic, M., Turudija, R., Trifunovic, M., Pavlovic, M., Jovanovic, I., Uzelac, N., & Milenkovic, V. (2022). A study of the use of mixed reality for capturing human observation and inferences in production environments. FACTA UNIVERSITATIS, Series: Mechanical Engineering, Online First, 21 pages. DOI: 10.22190/FUME220714047S (M21a+)

  
  

  Stojković, M., Madić, M., Trifunović, M., & Turudija, R. (2022). Determining the Optimal Cutting Parameters for Required Productivity for the Case of Rough External Turning of AISI 1045 Steel with Minimal Energy Consumption. Metals, 12(11), Article ID: 1793, 23 pages. DOI: 10.3390/met12111793 (M22)

  
  

  Mišić, D., Stojković, M., Trifunović, M., & Vitković, N. (2022). Detection and handling exceptions in business process management systems using Active Semantic Model. FACTA UNIVERSITATIS, Series: Mechanical Engineering, Online First, 22 pages. DOI: 10.22190/FUME211115026M (M21a+)

  
  

  Stojković, M., Trifunović, M., Milovanović, J., & Arsić, S. (2022). User Defined Geometric Feature for the Creation of the Femoral Neck Enveloping Surface. FACTA UNIVERSITATIS, Series: Mechanical Engineering, 20(1), 127-143. DOI: 10.22190/FUME200220034S (M21a+)

  
  

  Korunović, N., Banić, M., Trifunović, M., & Pavlović A. (2021). Bergström-Boyce vs. Hyperelastic Rubber Models in Structural Analysis of Tires. FACTA UNIVERSITATIS, Series: Mechanical Engineering, 19(4), 767-779. DOI: 10.22190/FUME191124002K (M21)

  
  

  Gostimirovic, M., Sekulic, M., Trifunovic, M., Madic, M., & Rodic, D. (2021). Stability analysis of the inverse heat transfer problem in the optimization of the machining process. Applied Thermal Engineering, 195, Article ID: 117174, 14 pages. DOI: 10.1016/j.applthermaleng.2021.117174 (M21a)

  
  

  Trifunović, M., & Madić, M. (2021). Experimental Research in Turning of Unreinforced Plastics: A Review. FACTA UNIVERSITATIS, Series: Mechanical Engineering. Rad je prihvaćen za publikovanje. Preliminarni DOI broj: 10.22190/FUME210207075T (M22)

  
  

  Trifunović, M., Madić, M., Janković, P., Rodić, D., & Gostimirović, M. (2021). Investigation of cutting and specific cutting energy in turning of POM-C using a PCD tool: Analysis and some optimization aspects. Journal of Cleaner Production, 303, Article ID: 127043, 19 pages. DOI: 10.1016/j.jclepro.2021.127043 (M21a)

  
  

  Trifunović, M., Madić, M., & Radovanović, M. (2020). Pareto optimization of multi-pass turning of grey cast iron with practical constraints using a deterministic approach. The International Journal of Advanced Manufacturing Technology, 110(7-8), 1893-1909. DOI: 10.1007/s00170-020-05994-4 (M22)

  
  

  Vitković, N., Mladenović, S., Trifunović, M., Zdravković, M., Manić, M., Trajanović, M., Mišić, D., & Mitić, J. (2018). Software Framework for the Creation and Application of Personalized Bone and Plate Implant Geometrical Models. Journal of Healthcare Engineering, 2018, Article ID: 6025935, 11 pages. DOI: 10.1155/2018/6025935 (M23)

  
  

  Trifunovic, M., Stojkovic, M., Trajanovic, M., Manic, M., Misic, D., & Vitkovic, N. (2016). Analysis of semantic features in free-form objects reconstruction. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30(1), 44-63. DOI: 10.1017/S0890060415000153 (M23)

  
  

  Stojkovic, M., Trifunovic, M., Misic, D., & Manic, M. (2015). Towards Analogy-Based Reasoning in Semantic Network. Computer Science and Information Systems, 12(3), 979-1008. DOI: 10.2298/CSIS141103036S (M23)

  
  

  Trifunovic, M., Stojkovic, M., Misic, D., Trajanovic, M., & Manic, M. (2015). Recognizing Topological Analogy in Semantic Network. International Journal on Artificial Intelligence Tools, 24(3), 1550006-1 - 1550006-25. DOI: 10.1142/S0218213015500062 (M23)

  
  

  Korunović, N., Trajanović, M., Stojković, M., Vitković, N., Trifunović, M., & Milovanović, J. (2012). Detailed vs. Simplified Tread Tire Model for Steady-State Rolling Analysis. Strojarstvo: časopis za teoriju i praksu u strojarstvu, 54(2), 153-160. (M23)

  
  

  Stefanović, G., Vučković, G., Stojiljković, M., & Trifunović, M. (2010). CO2 reduction options in cement industry - The Novi Popovac case. Thermal Science, 14(3), 671-679. DOI: 10.2298/TSCI091211014S (M22)

  
  

  Mišic, D., Stojkovic, M., Domazet, D., Trajanovic, M., Manic, M., & Trifunovic, M. (2010). Exception detection in business process management systems. Journal of Scientific and Industrial Research, 69(3), 188-193. (M22)

• Radovi u ostalim časopisima:

  Stanojković, J., Madić, M., Trifunović, M., & Janković, P. (2025). Application of Fractional Factorial Design and Dimensional Analysis for Analysis of Main Cutting Force in Turning. Journal of Engineering and Management, 3(2), 7-14. DOI: 10.7251/JEM2502007S (M54)

  
  

  Stanojković, J., Madić, M., Trifunović, M., Janković, P., Petković, D., & Marinković, D. (2026). Analysis of the main cutting force, cutting energy and specific cutting energy in turning of X155CrVMo12-1 steel. Acta Technica Jaurinensis, 19(1), 70-77. DOI: 10.14513/actatechjaur.00808 (M24)

  
  

  Trifunović, M., Madić, M., & Janković, P. (2025). Analysis, modelling and optimization of chip compression ratio in medium turning of C45E steel. Innovative Mechanical Engineering, 4(2), 15-23. (M54)

  
  

  Kocić, I., Nikolić, S.S., Perić, S., Madić, M., Trifunović, M., & Danković, N. (2024). Control system of catenary continous vulcanization line for rubber cables. FACTA UNIVERSITATIS Series: Automatic Control and Robotics, 23(1), 47-61. DOI: 10.22190/FUACR240717005K (M52)

  
  

  Trifunović, M., Madić, M., & Janković, P. (2023). Analysis of chip compression ratio in turning of polyoxymethylene copolymer. Journal of Production Engineering, 26(2), 13-17. DOI: 10.24867/JPE-2023-02-013 (M52)

  
  

  Trifunović, M., Madić, M., Janković, P., & Radovanović, M. (2023). Parameter screening in longitudinal turning of C45E steel for surface roughness analysis. Journal of the Technical University of Gabrovo, 67, 57-61. DOI: 10.62853/FVOS5135 (M53)

  
  

  Stojković, M., Trifunović, M., Madić, M., Turudija, R., & Manić, M. (2022). Partial effect of cutting parameters on engaged power and energy consumption: The case of external turning of an AISI1045 steel workpiece. Innovative Mechanical Engineering, 1(2), 34-47. (M54)

  
  

  Madić, M., Trifunović, M., & Janković, T. (2022). Development and analysis of a surface roughness model in dry straight turning of C45E steel. Innovative Mechanical Engineering, 1(2), 11-21. (M54)

  
  

  Trifunović, M., & Madić, M. (2022). Application of fractional factorial design for analysis of cutting energy in turning. Journal of the Technical University of Gabrovo, 65, 46-50. DOI: 10.62853/TOOK2098 (M53)

  
  

  Korunović, N., Stojković, M., Milovanović, J., Vitković, N., Trifunović, M., Manić, M., & Trajanović, M. (2016). Bioengineering and tire design related research at LIPS laboratory – a summary of results. Journal of the Serbian Society for Computational Mechanics, 10(1), 71-101. DOI: 10.5937/jsscm1601071K (M52)

  
  

  Trifunović, M., Stojković, M., Trajanović, M., Mišić, D., & Manić, M. (2013). Interpreting the meaning of geometric features based on the similarities between associations of semantic network. FACTA UNIVERSITATIS, Series: Mechanical Engineering, 11(2), 181-192. (M51)

• Radovi na naučnim skupovima međunarodnog značaja:

  Madić, M., Trifunović, M., Petković, D., & Janković, P. (2025). Evaluation of laser cutting conditions using the WASPAS method. Proceedings of the 10th international conference "Transport and Logistics" (til 2025) (pp. 244-247), 5th December 2025, Niš, Serbia. DOI: 10.46793/TIL2025.244M (M33)

  
  

  Trifunović, M., & Madić, M. (2025). Analysis of CO2 emissions in slot milling of C45E steel. Proceedings of the XV International Conference on Industrial Engineering and Environmental Protection (IIZS 2025) (pp. 91-97), 2nd-3rd October 2025, Zrenjanin, Serbia. ISBN: 978-86-7672-393-5 DOI: 10.5937/IIZS25091T (M33)

  
  

  Trifunović, M., Madić, M., Nikolić, S.S., & Milojković, M. (2025). Analysis of CO2 emissions in longitudinal medium turning of 42CrMo4 steel. Proceedings of the 21st International Conference "Man and Working Environment", Safety Engineering & Management – Science, Industry, Education (SEMSIE 2025) (pp. 245-250), 25th-26th September 2025, Sokobanja, Serbia. ISBN: 978-86-6093-123-0 DOI: 10.46793/SEMSIE25.245T (M33)

  
  

  Kocić, I., Nikolić, S.S., Mitić, D., Danković, N., Perić, S., Madić, M., & Trifunović, M. (2025). Analysis of the impact of friction on the quality of regulation depending on the used friction model and the control law. Proceedings of the 40th International Conference on Production Engineering – Serbia 2025 (ICPES 2025) (pp. 84-90), 18th-19th September 2025, Niš, Serbia. ISBN: 978-86-6055-197-1 DOI: 10.46793/ICPES25.084K (M33)

  
  

  Stanojković, J., Madić, M., & Trifunović, M. (2025). Dimensional analysis based prediction model of the main cutting force: Comparison and validation. Proceedings of the 40th International Conference on Production Engineering – Serbia 2025 (ICPES 2025) (pp. 55-61), 18th-19th September 2025, Niš, Serbia. ISBN: 978-86-6055-197-1 DOI: 10.46793/ICPES25.054S (M33)

  
  

  Madić, M., Trifunović, M., Stanojković, J., Rodić, D., & Janković, P. (2025). Analysis of specific cutting force in turning of 42CrMo4 steel. Proceedings of the 17th International Conference on Accomplishments in Mechanical and Industrial Engineering (DEMI 2025) (pp. 59-63), 29th-30th May 2025, Banja Luka, Republic of Srpska. ISBN: 978-99976-11-08-6 (M33)

  
  

  Madic, M., Petkovic, D., Mijajlovic, M., Banic, M., & Trifunovic, M. (2025). Analysis of the effects of cutting speed and focus position on oxidation marks in fiber reactive laser cutting. Proceedings of the 19th International Conference on Tribology (SERBIATRIB ’25) (pp. 450-455), 14th-16th May 2025, Kragujevac, Serbia. ISBN: 978-86-6335-128-8 (M33)

  
  

  Ristić-Durrant, D., Klapper, A., Kuhn, D., Banić, M., Madić, M., Simonović, M., Trifunović, M., & Trajković, A. (2025). Novel use of EO satellite data and AI in railways: A concept for rail buckling risk estimation in the SPATRA Project. Proceedings of the 6th International Workshop on "Artificial Intelligence for RAILwayS" (AI4RAILS 2025), colocated with the 20th European Dependable Computing Conference (EDCC 2025) (pp. 80-83), 8th April 2025, Lisbon, Portugal. ISBN: 979-8-3315-3741-8 DOI: 10.1109/EDCC-C66476.2025.00036 (M33)

  
  

  Madić, M., Trifunović, M., Nikolić, S.S., & Danković, N. (2024). Development and Solving of Constrained Laser Cutting Optimization Model. Proceedings of the XVII International Conference on Systems, Automatic Control and Measurements (SAUM 2024) (pp. 138-141), 14th-15th November 2024, Niš, Serbia. ISBN: 978-86-6125-282-2 (FEE) DOI: 10.46793/SAUM24.138M (M33)

  
  

  Stojković, M., Turudija, R., Trifunović, M., Putnik, G., Pavlović, M., Uzelac, N., & Milenković, V. (2024). Mixed reality as a perceptual interface of cognitive manufacturing systems. Proceedings of the 57th CIRP Conference on Manufacturing Systems 2024 (CMS 2024) (pp. 436-442), 29th-31st May 2024, Póvoa de Varzim, Portugal. DOI: 10.1016/j.procir.2024.10.111 (M33)

  
  

  Ristić-Durrant, D., Klapper, A., Banić, M., Madić, M., Trifunović, M., & Simonović, M. (2024). Using of satellite data for railway infrastructure monitoring. Proceedings of the XXI International Scientific-Expert Conference on Railways (RAILCON '24) (pp. IX-XI), 10th-11th October 2024, Niš, Serbia. ISBN: 978-86-6055-188-9 DOI: 10.5937/RAILCON24009D (M33)

  
  

  Madić, M., Trifunović, M., & Kovačević, M. (2024). Development of support vector machine model for chip form classification in turning of POM-C. Proceedings of the XIV International Conference on Industrial Engineering and Environmental Protection (IIZS 2024) (pp. 171-175), 3rd-4th October 2024, Zrenjanin, Serbia. ISBN: 978-86-7672-376-8 DOI: 10.46793/IIZS24.171M (M33)

  
  

  Madić, M., Trifunović, M., & Janković, P. (2024). Development and analysis of ANN model for tool life prediction in dry turning of S355JR unalloyed steel. Proceedings of the 15th International Scientific Conference MMA 2024 – Flexible Technologies (pp. 5-8), 24th-26th September 2024, Novi Sad, Serbia. ISBN: 978-86-6022-681-7 DOI: 10.24867/MMA-2024-01-002 (M33)

  
  

  Madić, M., Trifunović, M., & Petrović, G. (2024). Selection of cutting insert for longitudinal turning of unalloyed steel using robust decision making. Proceedings of the 20th International May Conference on Strategic Management (IMCSM24) (pp. 339-348), 31st May 2024, Bor, Serbia. ISBN: 978-86-6305-150-8 DOI: 10.5937/IMCSM24034M (M33)

  
  

  Trajković A., Janković P., Madić M., & Trifunović M. (2024). Overview of surface roughness parameters significant in the analysis of the machined surface by turning. Proceedings of the XII International Scientific and Technical Conference "Advanced Technologies in Mechanical Engineering" ATME-2024 (pp. 47-48), 5th-9th February 2024, Ivano-Frankivsk – Yaremche, Ukraine. ISBN: 978-617-8320-14-0 (M34)

  
  

  Madić, M., Ranđelović, S., & Trifunović, M. (2023). Stochastic simulation model for the analysis of assist gas costs in CO2 laser oxygen cutting. Proceedings of the 9th international conference "Transport and Logistics" (til 2023) (pp. 159-164), 1st December 2023, Niš, Serbia. ISBN: 978-86-6055-176-6 (M33)

  
  

  Madić, M., Trifunović, M., & Stanković, A. (2023). Solving single tool hole drilling path optimization problems using evolutionary algorithm. Proceedings of the 9th international conference "Transport and Logistics" (til 2023) (pp. 153-157), 1st December 2023, Niš, Serbia. ISBN: 978-86-6055-176-6 (M33)

  
  

  Trifunović, M., Madić, M., & Janković, P. (2023). Modelling and analysis of chip compression ratio in turning of POM-C. Proceedings of the 39th International Conference on Production Engineering of Serbia (ICPES 2023) (pp. 158-164), 26th-27th October 2023, Novi Sad, Serbia. ISBN: 978-86-6022-610-7 (M33)

  
  

  Trifunović, M., & Madić, M. (2023). Optimization of cutting parameters for maximizing profit rate in milling using a deterministic approach. Proceedings of the XIII International Conference "Industrial Engineering and Environmental Protection" (IIZS 2023) (pp. 64-71), 5th-6th October 2023, Zrenjanin, Serbia. ISBN: 978-86-7672-368-3 (M33)

  
  

  Trifunović, M., & Madić, M. (2023). Analysis of specific cutting energy in longitudinal turning of unalloyed steels. Proceedings of the XI Triennial International Conference "Heavy Machinery - HM 2023" (pp. C.7-C.12), 21st-24th June 2023, Vrnjačka Banja, Serbia. ISBN: 978-86-82434-01-6 (M33)

  
  

  Trifunović, M., Madić, M., & Vitković, N. (2023). Optimization of Cutting Parameters for Minimizing Unit Production Time in Multi-Pass Rough Turning of S355JR Structural Steel. Proceedings of the 16th International Conference on Accomplishments in Mechanical and Industrial Engineering (DEMI 2023) (pp. 99-103), 1st-2nd June 2023, Banja Luka, Republic of Srpska. ISBN: 978-99976-11-04-8 (M33)

  
  

  Madić, M., Trifunović, M., & Petković, D. (2023). Assessment of cutting regimes in turning of POM-C using a PCD tool based on AHP-WASPAS approach. Proceedings of the 19th International May Conference on Strategic Management (IMCSM23) (pp. 144-153), 25th May 2023, Bor, Serbia. ISBN: 978-86-6305-136-2 (M33)

  
  

  Madić, M., Coteata, M., Janković, P., & Trifunović, M. (2021). Analysis of specific cutting energy in laser fusion cutting of an aluminium alloy. Proceedings of the 25th Innovative Manufacturing Engineering & Energy International Conference (IManEE 2021) (Article ID: 012015), 21st-23rd October 2021, Iasi, Romania. DOI: 10.1088/1757-899X/1235/1/012015 (M33)

  
  

  Stojković, M., Manić, M., Turudija, R., Trifunović, M., Jovanović, I., Pavlović, M., & Milenković, V. (2021). Augmented reality in industry 4.0: Instruction for maintenance operations for high voltage equipment. Proceedings of the 38th International Conference on Production Engineering of Serbia (ICPE-S 2021) (pp. 305-311), 14th-15th October 2021, Čačak, Serbia. ISBN: 978-86-7776-252-0 (M33)

  
  

  Trifunović, M., Madić, M., & Vitković, N. (2021). Cutting parameters optimization for minimizing energy consumption in multi-pass turning of grey cast iron. Proceedings of the 14th International Scientific Conference MMA 2021 – Flexible Technologies (pp. 27-30), 23rd-25th September 2021, Novi Sad, Serbia. ISBN: 978-86-6022-364-9 (M33)

  
  

  Trifunović, M., Janković, P., & Vitković, N. (2020). Optimization of Cutting Parameters for Minimizing Part Production Costs in Multi-Pass Rough Turning of EN-GJL-250 Grey Cast Iron. Proceedings of the 5th International Conference "Mechanical Engineering in XXI Century" (MASING 2020) (pp. 255-258), 9th-10th December 2020, Niš, Serbia. ISBN: 978-86-6055-139-1 (M33)

  
  

  Madic, M., Janković, P., Trifunović, M., & Kovačević, M. (2020). Application of software solution for solving engineering design optimization problems. IOP Conference Series: Materials Science and Engineering, Volume 1018, Proceedings of the 11th International Conference on Advanced Manufacturing Technologies (ICAMaT 2020) (Article ID: 012025, 8 pages), 29th-30th October 2020, Bucharest, Romania. DOI: 10.1088/1757-899X/1018/1/012025 (M33)

  
  

  Vitković, N., Simonović, M., Miltenović, A., & Trifunovic, M. (2018). Software module for the visualization and planning of marshalling yard operations. Proceedings of the XVIII Scientific-Expert Conference on Railways (RAILCON '18) (pp. 213-216), 11th-12th October 2018, Niš, Serbia. ISBN: 978-86-6055-105-6 (M33)

  
  

  Vitković, N., Stojković, M., Trajanović, M., Milovanović, M., Trifunović, M., Manić, M., Mitić, J., Arsić, S., & Husain, K. (2018). Personalized 3D Model of Bone Scaffold Created by Application of Method of Anatomical Features. Proceedings of the 4th International Conference "Mechanical Engineering in XXI Century" (MASING 2018) (pp. 305-308), 19th-20th April 2018, Niš, Serbia. ISBN: 978-86-6055-103-2 (M33)

  
  

  Zdravković, M., Vitković, N., Trajanović, M., Trifunović, M., & Korunović, N. (2018). Model-based, client-side integration of heterogeneous data from REST services. Proceedings of the 8th International Conference on Information Society and Technology (ICIST 2018) (pp. 278-281), 11th-14th March 2018, Kopaonik, Serbia. ISBN: 978-86-85525-22-3 (M33)

  
  

  Mišić, D., Mišić, M., Trifunović, M., Arh, T., & Matić, P. (2014). AHP Based Comparison of open-source BPM Systems. Proceedings of the 6th International ICT Conference (6th International ICT Forum) (pp. 119-123), 14th-16th October 2014, Niš, Serbia. ISBN: 978-86-80593-52-4 (M33)

  
  

  Madić, M., Vitković, N., & Trifunović, M. (2014). Application of the WASPAS Method for Software Selection. Proceedings of the 6th International ICT Conference (6th International ICT Forum) (pp. 115-118), 14th-16th October 2014, Niš, Serbia. ISBN: 978-86-80593-52-4 (M33)

  
  

  Trifunovic, M., Stojkovic, M., Trajanovic, M., Misic, D., & Manic, M. (2014). Approach in realization of analogy-based reasoning in semantic network. Proceedings of the 4th International Conference on Information Society and Technology (ICIST 2014) (pp. 192-197), 9th-13th March 2014, Kopaonik, Serbia. ISBN: 978-86-85525-14-8 (M33)

  
  

  Stojkovic, M., Korunovic, N., Trajanovic, M., Milovanovic, J., Trifunovic, M., & Vitkovic, N. (2013). Design study of anatomically shaped lattice scaffolds for the bone tissue recovery. Proceedings of the 3rd South-East European Conference on Computational Mechanics (SEECCM III) (pp. 381-393), 12th-14th June 2013, Kos island, Greece. ISBN : 978-960-99994-4-1 (M33)

  
  

  Stevanović, D., Korunović, N., Trajanović, M., Trifunović, M., Milovanović, J., & Stojković, M. (2012). Finite element model of human tibia and preliminary analysis. Proceedings of the 11th International Scientific Conference MMA 2012 - Advanced Production Technologies (pp. 289-292), 20th-21st September 2012, Novi Sad, Serbia. ISBN: 978-86-7892-419-4 (M33)

  
  

  Veselinovic, M., Stevanovic, D., Trajanovic, M., Manic, M., Arsic, S., Trifunovic, M., & Misic, D. (2011). Method for creating 3D surface model of the human tibia. Proceedings of the 34th International Conference on Production Engineering (ICPE 2011) (pp. 355-358), 28th-30th September 2011, Niš, Serbia. ISBN: 978-86-6055-019-6 (M33)

  
  

  Trifunović, M., Milovanović, J., Trajanović, M., Korunović, N., & Stojković, M. (2011). Approaches to automated creation of tissue engineering scaffolds. Proceedings of the 34th International Conference on Production Engineering (ICPE 2011) (pp. 335-338), 28th-30th September 2011, Niš, Serbia. ISBN: 978-86-6055-019-6 (M33)

  
  

  Korunović, N., Trajanović, M., Stojković, M., Vitković, N., Trifunović, M., & Milovanović, J. (2011). Tire tread modeling for FEA. Proceedings of the 34th International Conference on Production Engineering (ICPE 2011) (pp. 209-212), 28th-30th September 2011, Niš, Serbia. ISBN: 978-86-6055-019-6 (M33)

  
  

  Stojkovic, M., Manic, M., Trifunovic, M., & Vitkovic, N. (2011). Semantic interpretation of the product model features in product quality assessment. Proceedings of the 6th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" (IWC TQM 2011) (pp. 481-484), 7th-11th June 2011, Belgrade, Serbia. ISBN: 978-86-7083-727-0 (M33)

  
  

  Stojković, M., Manić, M., Trifunović, M., & Mišić, D. (2011). Semantic categorization of data by determining the similarities of associations of the semantic network. Proceedings of the 1st International Conference on Information Society Technology and Management (ICIST 2011) (pp. 140-145), 6th-9th March 2011, Kopaonik, Serbia. ISBN: 978-86-85525-07-0 (M33)

  
  

  Manić, M., Stojković, M., & Trifunović, M. (2010). Semantic features in computer aided manufacturing systems. Proceedings of the International Conference "Mechanical Engineering in XXI Century" (MASING 2010) (pp. 179-182), 25th-26th November 2010, Niš, Serbia. ISBN: 978-86-6055-008-0 (M33)

  
  

  Stefanovic, G., Vuckovic, G., Stojiljkovic, M., & Trifunovic, M. (2009). Possibility of CO2 Emissions Decreasing in Cement Industry - the Novi Popovac case. Proceedings of the 5th Dubrovnik Conference on Sustainable Development of Energy, Water And Environment Systems (SDEWES 2009), 29th September - 3rd October 2009, Dubrovnik, Croatia. ISBN: 978-953-6313-97-6 (M33)

  
  

  Stojković, M., Manić, M., Trifunović, M., & Mišić, D. (2009). Semantic interpretation of geometrical features. Proceedings of the 5th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches" (IWC TQM 2009) (pp. 91-96), 31st May - 4th June 2009, Belgrade, Serbia. ISBN: 978-86-7083-660-0 (M33)

• Radovi na domaćim naučnim skupovima:

  Trifunović, M., Madić, M., & Janković, P. (2024). Development of empirical model for analysis of chip compression ratio in medium turning of C45E steel. Proceedings of the 44th JUPITER Conference with foreign participants (pp. 3.77-3.82), 16th-17th October 2024, Belgrade, Serbia. ISBN: 978-86-6060-204-8 (M63)

  
  

  Korunović, N., Trifunović, M., Vitković, N., Milovanović, J., & Trajanović, M. (2014). Non-linear cord material models in finite element analysis of tires. Zbornik radova VIII Naučne konferencije "PneUMAtici 2014" (PUMA 2014) (pp. 27-42), 12.-13. decembar 2014. godine, Beograd, Srbija. ISBN: 978-86-84231-34-7 (M63)

  
  

  Stojković, M., Manić, M., Trifunović, M., & Mišić, D. (2009). Prepoznavanje tehničkih elemenata CAD modela analizom njihovih značenjskih odlika. YU INFO 2009, 8.-11. mart 2009. godine, Kopaonik, Srbija. Zbornik radova na CD-u. (M63)

  
  

  Trajanović, M., Vitković, N., Trifunović, M., & Arsić, S. (2009). Novi pristup u generisanju interpolacionih površina fizičkih objekata. YU INFO 2009, 8.-11. mart 2009. godine, Kopaonik, Srbija. Zbornik radova na CD-u. (M63)

  
  

  Zdravković, M., Trajanović, M., Manić, M., & Trifunović, M. (2007). Integrisanje poslovnih servisa u malim i srednjim preduzećima proizvodne delatnosti. YU INFO 2007, 11.-14. mart 2007. godine, Kopaonik, Srbija. Zbornik radova na CD-u. (M63)

• Tehnička rešenja:

  AsmWeb (M85)
  Rukovodilac projekta: dr Miroslav Trajanović, red. prof.
  Odgovorno lice: dr Miroslav Trajanović, red. prof.
  Autori: dr Miloš Stojković, dr Dragan Mišić, Milan Trifunović, Nikola Vitković, dr Miodrag Manić
  Razvijeno: u okviru projekta "Virtuelni koštano zglobni sistem čoveka i njegova primena u pretkliničkoj i kliničkoj praksi" (broj projekta: III41017)
  Godina: 2012
  Primena: 2012.-2013.

  
  

  Definisanje 3D modela nedostajućih delova kostiju na osnovu 3D modela kostiju i osteofiksacionog materijala upotrebom MAF metode (M85)
  Rukovodilac projekta: dr Miroslav Trajanović, red. prof.
  Odgovorno lice: dr Miroslav Trajanović, red. prof.
  Autori: dr Miroslav Trajanović, Nikola Vitković, Marko Veselinović, dr Jelena Milovanović, dr Nikola Korunović, dr Dragan Mišić, Milan Trifunović
  Razvijeno: u okviru projekta "Virtuelni koštano zglobni sistem čoveka i njegova primena u pretkliničkoj i kliničkoj praksi" (broj projekta: III41017)
  Godina: 2011.-2014.
  Primena: novembar 2012.

  
  

  TEPOST - Sistem za projektovanje TEhnoloških POSTupaka izrade proizvoda i usluga (M85)
  Rukovodilac projekta: dr Miodrag Manić, red. prof.
  Odgovorno lice: dr Miodrag Manić, red. prof.
  Autori: dr Miodrag Manić, dr Dragan Mišić, dr Miloš Stojković, Milan Trifunović, Nikola Vitković
  Razvijeno: u okviru projekta "Planiranje, terminiranje i adaptabilno upravljanje proizvodnim procesima" (broj projekta: TR-6215A)
  Godina: 2005.-2008.
  Primena: 2008.-2010.